Minitrix N - 66120 - Scenery - Building package "Hoogoven" series "Vom Erz zum stahl" Partly built, complete Minitrix - hoogoven - 66120 - dimensions 490 x 182 x 375 mm only issued between 2002-2006 Limited edition Challenging kit model with a blast furnace shaft furnace charging system, foundry, forestry equipment wind heaters, hot wind induction loop, elevator cup charging, dust bag, the dust washer and Erzentladebühne Construction time required about 40-50 hours 490 x 182 mm footprint. Height 375 mm. The blast furnace is the heart of the work. The constant roar of the blast furnaces fills the air, deep in the blast furnace molten iron cooks the 24 hours and 365 days a year. Every few hours is the molten pig iron tapped and transported by rail to steel processing. The actual blast furnace consists of a conical upper part, the shaft and the likewise conical bottom part, the pawl. On top, the so-called gout, the Möller, the ore, the cokes and, depending on the type of ore contamination, the gangue, various slag forming additives (e.g. limestone) fed. The air at a temperature of 1000-1300 ° C in the stove, burns the carbon to carbon monoxide, the blast furnace gas. The rising top gas reduces in turn the ore to liquid but still very carbon-containing iron. The blast furnace gas is cleaned and used for firing the blast furnaces. The liquid iron troops with the slag in the lower section, the so-called frame. There it is drained, separated from the slag on the platform of the pouring hall and led to the waiting torpedo sled car. Tested and working. The photos are an integral part of the description of this lot. Locomotives include a one-month warranty after purchase. Items that are found to be defective within 1 month, may be returned free of charge within the Netherlands. All packages are sent by registered and insured mail.