UFOGRAPHY MAPC STING Close Up 150mm MACRO 4x Canon EOS EF 微距鏡頭





€11 | ||
|---|---|---|
€8 | ||
€7 | ||
Catawiki買家保障
在您收到物品前,我們會妥善保管您的付款。查看詳情
Trustpilot評分 4.4 | 133960 則評論
在Trustpilot獲得極佳評等。
UFOGRAPHY MAPC STING Close Up 150mm MACRO 4x 適用於 Canon EOS EF,完整的微距攝影套件,物理狀態優良,經測試並運作良好,不含相機。
賣家描述
MAPC STING
近拍 150mm 宏观 4x 佳能 EOS EF 制造于意大利
宏摄影套件,兼容所有 Canon EOS EF 单反相机。
采用传统探针式技术,经济实惠地接近微距摄影。
对焦通过靠近主体来实现,手动曝光 M,调节快门时间和 ISO。
完整套件配有铝制显微镜物镜,放大倍率为 4x,带后盖。
在现场表现良好,对焦距离仅约距主体几毫米。
极佳的放大倍数,适合业余和实验性使用。
手持拍摄困难,只有几毫米的变化就会改变主体的焦点。
最佳效果是在三脚架和合适的宏观照明条件下实现。
可拆卸套件采用 3D PLA 打印。
与机身的配合良好,带有经典的卡扣点击声。
相机不包含在内
Macro photography kit, compatible with all Canon EOS EF cameras
Traditional probe technique for an economical approach to macro photography.
The focus is getting closer to the subject, manual exposure M, adjusting time and ISO.
Complete kit with metal microscope eyepiece with 4x factor and rear cap.
In the field it performs well, the focus takes place a few mm from the subject.
Excellent magnification factor, suitable for amateur and experimental use.
Difficult to photograph handheld, a few millimeters change the focus of the subject.
best results are obtained with a tripod and suitable macro lighting.
The demountable kit is printed in 3D PLA.
Good coupling with the camera body, with the classic coupling click.
The camera is not included
MAPC STING
近拍 150mm 宏观 4x 佳能 EOS EF 制造于意大利
宏摄影套件,兼容所有 Canon EOS EF 单反相机。
采用传统探针式技术,经济实惠地接近微距摄影。
对焦通过靠近主体来实现,手动曝光 M,调节快门时间和 ISO。
完整套件配有铝制显微镜物镜,放大倍率为 4x,带后盖。
在现场表现良好,对焦距离仅约距主体几毫米。
极佳的放大倍数,适合业余和实验性使用。
手持拍摄困难,只有几毫米的变化就会改变主体的焦点。
最佳效果是在三脚架和合适的宏观照明条件下实现。
可拆卸套件采用 3D PLA 打印。
与机身的配合良好,带有经典的卡扣点击声。
相机不包含在内
Macro photography kit, compatible with all Canon EOS EF cameras
Traditional probe technique for an economical approach to macro photography.
The focus is getting closer to the subject, manual exposure M, adjusting time and ISO.
Complete kit with metal microscope eyepiece with 4x factor and rear cap.
In the field it performs well, the focus takes place a few mm from the subject.
Excellent magnification factor, suitable for amateur and experimental use.
Difficult to photograph handheld, a few millimeters change the focus of the subject.
best results are obtained with a tripod and suitable macro lighting.
The demountable kit is printed in 3D PLA.
Good coupling with the camera body, with the classic coupling click.
The camera is not included

