編號 95516973
已出售

最終出價
€ 34
7 週前
UFOGRAPHY MAPF STING 150mm Microscope Close-up 4x Kit Nikon F (no camera incl.) | 微距鏡頭
MAPF STING Macro Probe
150mm Microscope Close-up 4x Kit Nikon F
3D Print Made in Italy
Kit per macro fotografia, compatibile con tutte le fotocamere reflex Nikon F
Tecnica tradizionale a sonda per avvicinarsi in modo economico alla fotografia macro.
La messa a fuoco viene avvicinandosi al soggetto, esposizione manuale M, regolando tempo e ISO.
Kit completo di obiettivo RMS da microscopio acromatico in alluminio con fattore 4x e tappo posteriore.
Sul campo si comporta bene, la messa fuoco avviene a pochi mm dal soggetto.
Ottimo fattore di ingrandimento, adatto per usi amatoriali e sperimentali.
Difficile fotografare a mano libera, pochi millimetri cambiano la messa a fuoco del soggetto.
i risultati migliori si ottengono con cavalletto e illuminazione macro adatta.
Il Kit smontabile è stampato in 3D PLA.
Buono l'accoppiamento con il corpo macchina, con il classico click di aggancio.
Essendo in plastica ci vuole attenzione nell'aggancio al corpo macchina.
La macchina fotografica non è compresa nel kit.
Macro photography kit, compatible with all Nikon F SLR cameras
Traditional probe technique for an economical approach to macro photography.
The focus is getting closer to the subject, manual exposure M, adjusting time, and ISO.
Complete kit with metal microscope eyepiece with 4x factor and rear cap.
In the field it performs well, the focus takes place a few mm from the subject.
Excellent magnification factor, suitable for amateur and experimental use.
Difficult to photograph handheld, a few millimeters change the focus of the subject.
best results are obtained with a tripod and suitable macro lighting.
The demountable kit is printed in 3D PLA.
Good coupling with the camera body, with the classic coupling click.
Being made of plastic, attention must be paid to hooking it to the machine body.
The camera is not included in the kit.
編號 95516973
已出售

UFOGRAPHY MAPF STING 150mm Microscope Close-up 4x Kit Nikon F (no camera incl.) | 微距鏡頭
MAPF STING 宏探針
150毫米显微镜近景4倍套件尼康F
意大利制造的3D打印
微距摄影套件,兼容所有尼康F反光相机
一种传统的探针技术,以经济的方式接近微距摄影。
对焦逐渐接近主体,使用手动曝光模式(M),调整快门速度和ISO。
全套铝制显微镜RMS目标,带4倍放大倍数和后盖。
在野外表现良好,焦点在距离主体几毫米处。
极好的放大倍率,适合业余和实验用途。
用手持方式拍摄很困难,几毫米的变化就会改变主体的焦点。
取得最佳效果的方法是使用三脚架和适合的微距照明。
可拆卸套件采用3D打印的PLA材料。
与相机主体的配合良好,具有经典的卡扣点击声。
由于是塑料材质,需要小心连接到相机机身。
相机不包括在套件中。
微距摄影套件,兼容所有尼康F单反相机
一种经济实惠的宏观摄影传统探针技术。
重点在于靠近拍摄对象,手动设置曝光参数M,调整快门时间和ISO。
完整套件,包括金属显微镜目镜(4倍放大)和后盖。
在现场表现良好的情况下,焦点距离主题只有几毫米。
放大倍率优异,适合业余和实验用途。
用手持拍摄难度较大,焦点微调几毫米即可改变被拍摄物体的焦点。
使用三脚架和适当的微距照明可以获得最佳效果。
可拆卸套件采用3D PLA打印。
与相机机身良好配合,具有经典的卡扣声。
由于由塑料制成,必须注意将其挂接到机器主体上。
该套装不包括相机。
您亦可能喜歡
-
-
-
-
-
-
-
-
-
-
設置搜索提醒
設置搜索提醒,以便在有新匹配可用時收到通知。