SAE - 3000 Solid state preamplifier, 3100 Solid state power amplifier - Set stereo
Pioneer - A-150 - Non commutazione dinamica Amplificatore integrato a stato solido
N. 83415067
Pioneer A-150 stereo amplifier for sale.
I bought it directly from Japan
Class H amplifier with dynamic power supply
repair-free, factory condition
There are traces and scratches on the upper edge of the front panel.
IT has a dynamic voice
ac: 100 volt use to 220/110 volt konverter minimum 2000 W
sounds better than its A 80 European counterpart, that's my own experience;
1 pair per side 2SA1295 2SC3264 (200W) and 1 pair 2SA1104 2SC 2579 (80W)
2x12000mfd capacitor 71V
2x10000mfd Capacitor 100V!!
Also suitable for driving large speakers
2x150 W 8 ohm THD: 0.0003
2x220 W 8 ohm 1HKZ
I send it carefully packed in a sturdy cardboard box, which will be filled with foam at the top and bottom. The device will be packed with blisters
SPECS:
Type: Pre-main amplifier
Efficient power: 150W + 150W (8 Ω, 20Hz – 20kHz, dual-channel driver)
Harmonic distortion factor: (20 Hz - 20 kHz) 0.003% (at RMS)
Intermodulation distortion factor: (50 Hz: 7 khz = 4:1) 0.003% (at RMS)
Output bandwidth: 5Hz~55kHz (IHF, dual-channel driver, THD0.01%)
Output terminal Speaker (4 Ω ~ 16 Ω): A, B, A + B
Tape Rec1, 2 : 150 mv
17kg!
Pioneer A-150 stereo amplifier for sale.
I bought it directly from Japan
Class H amplifier with dynamic power supply
repair-free, factory condition
There are traces and scratches on the upper edge of the front panel.
IT has a dynamic voice
ac: 100 volt use to 220/110 volt konverter minimum 2000 W
sounds better than its A 80 European counterpart, that's my own experience;
1 pair per side 2SA1295 2SC3264 (200W) and 1 pair 2SA1104 2SC 2579 (80W)
2x12000mfd capacitor 71V
2x10000mfd Capacitor 100V!!
Also suitable for driving large speakers
2x150 W 8 ohm THD: 0.0003
2x220 W 8 ohm 1HKZ
I send it carefully packed in a sturdy cardboard box, which will be filled with foam at the top and bottom. The device will be packed with blisters
SPECS:
Type: Pre-main amplifier
Efficient power: 150W + 150W (8 Ω, 20Hz – 20kHz, dual-channel driver)
Harmonic distortion factor: (20 Hz - 20 kHz) 0.003% (at RMS)
Intermodulation distortion factor: (50 Hz: 7 khz = 4:1) 0.003% (at RMS)
Output bandwidth: 5Hz~55kHz (IHF, dual-channel driver, THD0.01%)
Output terminal Speaker (4 Ω ~ 16 Ω): A, B, A + B
Tape Rec1, 2 : 150 mv
17kg!