Beautiful vintage High End classic turntable sony PS-4750 from 1975 with a cartridge Shure M95ED in very good condition. . The Sony PS-4750 uses the new material SBMC (Sony Bulk Mould Compound) in the construction of it's turntable platter and cabinet. Together with the use of servo-controlled direct drive DC motor, this new material with its unique acoustic and vibration absorption properties provides an excellent signal to noise ratio. An innovative frequency sensing device is utilized in the stereo control system in the form of a magnetic coating inside the platter. This unusual frequency generator (FG) component of the servo system, contributes substantially to the exceptionally low degree of wow and flutter. Newly engineered rubber insulation mats isolate externally caused mechanical vibrations that would have an adverse effect on the quality of reproduction. The high compliance, low friction tonearm is provided with a precisely engineered anti-skating compensator for proper tracking and superb reproduction throughout the audio spectrum. Other features of the PS-4750 include a high-visibility stroboscope, a built-in stylus overhang checker, a cueing lever to prevent record and stylus damage, and convenient pitch controls for accurate tone reproduction. Delivery with box well protected, internal reinforcement, bubble wrap and insurance. Specifications Platter: 340mm SBMC Drive system: DC servo controlled direct drive motor Speeds: 33 and 45rpm Wow and flutter: 0.03% WRMS Signal to noise ratio: 70dB Tonearm: universal static balance Pivot to stylus length: 237mm Overall arm length: 314mm Overhang: 15mm Tracking force: 0 to 3g Shell weight: 7.5g Tracking force adjustment: 4 to 12.5g (12.5 to 16.5g with weight) Weight: 8kg