Type: PMA 6.5 Power Amplifier Unit Rated output: 40W + 40W (6 ohm, 1 khz) Maximum Practical Power (EIAJ) 55W + 55W (6 Ω) Speaker load impedance 6 Ω ~ 16 Ω Preamplifier Section Input Sensitivity / Impedance Phono MM : 2.5mV/47k Ω Line : 150mV/47k Ω Rated output Rec out:150mV RIAA deviation 20 Hz to 20 kHz ± 0.5 dB Signal-to-noise ratio Phono MM : 80 dB (at 5 mV input) Line:95dB(Source direct on) Power supply voltage 220 VAC, 50Hz/60Hz Power consumption 80W External Dimensions (including legs, knobs, terminals) Width 250x Height 112x Depth 376 mm Weight 6.0kg Type: DSD 6.5 D/A conversion part system Lambda Super Linear Converter Filter 8 x oversampling digital filter Frequency characteristic 2 Hz to 20 kHz Signal-to-noise ratio 106dB Dynamic range 96dB Total harmonic distortion factor Not more than 0.003% Channel separation 100dB Analog output voltage 2.0V/10k Ω Pwer 220 VAC, 50Hz/60Hz Power consumption 10W Approximately 4W (during standby) External dimensions Width 250x Height 112x Depth 350 mm Weight 3.5kg only eu