We are from J&R audio. Two 'hobbyists' who have been collecting and repairing 'older' audio for many years. Hobby that got a bit out of hand. With about 800 items, we think it's time to reduce the collection. Many products can be sold for a reasonable price. And this despite our professional way of working. Service has been provided on all our products, mostly by ourselves but also by our extensive network of many professionals with whom we have enjoyed working forqq.. years.Components that needed to be replaced have been replaced, strings in most cases renewed, as well as the lighting. Which in most cases has been converted to LED lighting. It is possible to give a warranty for many products. Ask about the possibilities. We also polish the hoods of record players and spray the outside of equipment or renew the paintwork of your speakers. We hope to be able to make many people happy with nice equipment. We put the proceeds into improving tools and equipment. And so we hope to continue to improve and to be able to continue this work that has arisen from friendship and hobby for a long time to come. Type Full auto player Drive system Bidirectional servo direct drive Motor Linear drive motor Speed control system Speed servo and phase servo by frequency detection Number of revolutions 33 1/3, 45 rpm Rotational speed deviation 0.002% or less Speed switching mechanism Soft touch push button Wow flutter 0.02% (Rotating System) 0.03% (JIS) Wrms or Less Signal-to-noise ratio 75 dB (DIN-B) or more Startup time Within 2 Seconds (at 33 1/3rpm) Power supply voltage characteristics 0% for 90 to 110 v variation Load characteristic 0% (Needle Pressure 80g Outer Circumference) Turntable 30 cm Aluminum Die-cast Tone Arm Section Type Dynamic balanced semi-integrated Straight contact free electronically controlled servo tone arm Effective length 220mm Overhang 16mm Tracking error 3 degrees or less Needle pressure variable range 0 ~ 3g Applicable Cartridge Dead Weight 4 ~ 6g (including screws and nuts) Output code Low Capacity Cord (Approx. 1.2m) Attachment mechanism Contactless electronic anti-skating mechanism Cartridge Section Type MM Type Model Name DL-60 Output voltage 2.5mV Left-right separation 25 dB or More (1 kHz) Dynamic Compliance 10x10-6cm/dyne Playback frequency range 20 Hz to 30 kHz Needle tip Diamond elliptical needle Applicable Needle Pressure 1.8 ± 0.3g Dead weight 4.6g Exchange needle DSN-60 Cabinet Special rigid resin integral molding Pwer 100 VAC, 50Hz/60Hz Power consumption 6W External dimensions Width 434x Height 105x Depth 360 mm (with dust cover closed) Weight Approx. 5 kg