Quadral Phonoloque - 將軍 MK-V - 喇叭組
編號 83298051
Digidesign - High-Fidelity Synchronizer SMPTE Slave Driver MH034 SSD - - 樂器 - 美國 (沒有保留價)
編號 83298051
Digidesign - High-Fidelity Synchronizer SMPTE Slave Driver MH034 SSD - - 樂器 - 美國 (沒有保留價)
High-Fidelity Synchronizer SMPTE Slave Driver MH034 SSD
Made in U.S.A.
Serial number: A02571
The Digidesign SMPTE Slave Driver™ is a hardware device designed to provide high-fidelity, direct hardware synchronization of Digidesign’s Pro Tools™, Sound Tools II™, or ProMaster 20™ digital recording &
editing systems to external Longitudinal SMPTE Time code (LTC).
When used with any of the above systems, the SMPTE Slave Driver allows you to achieve high-fidelity LTC
synchronization with any digital or analog audio or video tape recorder. This makes the SMPTE Slave Driver
a excellent complement to your Digidesign recording & editing system for synchronization applications such
as overdubbing, machine-to-machine lock, and track bouncing—as well as music scoring or other nonVertical Interval Time Code video applications.
Technical Specifications
LTC Input: Balanced XLR female connector -20 to +22 dBu level 200 k differential input
impedance
LTC Output: Balanced XLR male connector 2.5 V p-p balanced (+3.8 dBu RMS) ohms
output impedance
Slave Clock Output: 256 times Sample Rate HCTTL level 75 ohm BNC connector
Slave Clock Input: 256 times Sample Rate HCTTL level 75 ohm BNC connector
External Clock Input: 1 or 256 times Sample Rate
rear panel switch selectable
HCTTL level
75 ohm BNC connector
MIDI MTC Output: 5-pin DIN connector
MIDI current loop
Mac MTC Output: 8-pin mini DIN connector
RS-422 levels, 1 MHz clock rate
SYS-EX Input: Mac: 8-pin mini DIN connector, RS-422 levels
MIDI: 5-pin DIN connector, MIDI current loop, reverse polarity
protected rear panel switch selectable Mac / MIDI
Input/Output Sample Rates: 44.1 kHz, 48 kHz, 44.056 kHz, 47.952 kHz (pull-down), 44.144 kHz, 48.048 kHz
(pull-up)
Input/Output LTC 30 FPS Non-Drop
30 FPS Drop
29.97 FPS Non-Drop
29.97 FPS Drop
25 FPS
24 FPS
Varispeed range: Nominal rate ± 10%
SMPTE Input Indication: LED lights when LTC is applied to LTC input connector
Lock Indication: LED lights when total position error is less than ± 5 LTC cells (±0.0625 frames)
Speed Calibration Indication: LED lights steadily when Slave Clock Output frequency is equal to 256 times the
nominal Sample Rate (as indicated on the front panel) ± 250 ppm. Slow flash for
underspeed, fast flash for overspeed.
AC Input: 90 to 260 VAC, 47 to 63 Hz, 43 Watts MAX
Dimensions: 1 rack-unit, 19” W x 10.5” D x 1.7” H
Weight: 4.1 lbs.
Digidesign SMPTE Slave Driver