Denon - PMA-720AE - Integrierter Festkörper-Verstärker
Nr. 80615583
Verkauft
Höchstgebot
110 €
Vor 16 Wochen
Denon - PMA 6.5, DSD 6.5 Stereoanlage - Diverse modellen
Type: PMA 6.5
Power Amplifier Unit Rated output: 40W + 40W (6 ohm, 1 khz)
Maximum Practical Power (EIAJ) 55W + 55W (6 Ω)
Speaker load impedance 6 Ω ~ 16 Ω
Preamplifier Section Input Sensitivity / Impedance Phono MM : 2.5mV/47k Ω
Line : 150mV/47k Ω
Rated output Rec out:150mV
RIAA deviation 20 Hz to 20 kHz ± 0.5 dB
Signal-to-noise ratio Phono MM : 80 dB (at 5 mV input)
Line:95dB(Source direct on)
Power supply voltage 220 VAC, 50Hz/60Hz
Power consumption 80W
External Dimensions (including legs, knobs, terminals) Width 250x Height 112x Depth 376 mm
Weight 6.0kg
Type: DSD 6.5
D/A conversion part system Lambda Super Linear Converter
Filter 8 x oversampling digital filter
Frequency characteristic 2 Hz to 20 kHz
Signal-to-noise ratio 106dB
Dynamic range 96dB
Total harmonic distortion factor Not more than 0.003%
Channel separation 100dB
Analog output voltage 2.0V/10k Ω
Pwer 220 VAC, 50Hz/60Hz
Power consumption 10W
Approximately 4W (during standby)
External dimensions Width 250x Height 112x Depth 350 mm
Weight 3.5kg
only eu
Nr. 80615583
Verkauft
Denon - PMA 6.5, DSD 6.5 Stereoanlage - Diverse modellen
Type: PMA 6.5
Power Amplifier Unit Rated output: 40W + 40W (6 ohm, 1 khz)
Maximum Practical Power (EIAJ) 55W + 55W (6 Ω)
Speaker load impedance 6 Ω ~ 16 Ω
Preamplifier Section Input Sensitivity / Impedance Phono MM : 2.5mV/47k Ω
Line : 150mV/47k Ω
Rated output Rec out:150mV
RIAA deviation 20 Hz to 20 kHz ± 0.5 dB
Signal-to-noise ratio Phono MM : 80 dB (at 5 mV input)
Line:95dB(Source direct on)
Power supply voltage 220 VAC, 50Hz/60Hz
Power consumption 80W
External Dimensions (including legs, knobs, terminals) Width 250x Height 112x Depth 376 mm
Weight 6.0kg
Type: DSD 6.5
D/A conversion part system Lambda Super Linear Converter
Filter 8 x oversampling digital filter
Frequency characteristic 2 Hz to 20 kHz
Signal-to-noise ratio 106dB
Dynamic range 96dB
Total harmonic distortion factor Not more than 0.003%
Channel separation 100dB
Analog output voltage 2.0V/10k Ω
Pwer 220 VAC, 50Hz/60Hz
Power consumption 10W
Approximately 4W (during standby)
External dimensions Width 250x Height 112x Depth 350 mm
Weight 3.5kg
only eu
Das könnte Ihnen auch gefallen
Suchalarm einrichten
Richten Sie einen Suchalarm ein, um benachrichtigt zu werden, sobald neue passende Objekte verfügbar sind.
Dieses Objekt wurde vorgestellt in:
So kaufen Sie auf Catawiki
1. Etwas Besonderes entdecken
2. Höchstgebot abgeben
3. Sichere Zahlung durchführen