Piaggio - Vespa Rally - VRD1 - 180 cc - 1971
Αρ. 28932757
Piaggio - Ape - Faro Basso AC4 - 150 cc - 1964
Αρ. 28932757
Piaggio - Ape - Faro Basso AC4 - 150 cc - 1964
Very rare ‘faro basso’ model (with low headlight) with loading platform in original condition. Imported from Italy.
The following work has been carried out by a German specialist workshop:
The delivered vintage vehicle was technically completely checked and repaired.
The following work has been carried out:
- The vehicle underbody, engine compartment and axles were cleaned with a high-pressure cleaner as well as brushes and scrapers
- The vehicle was dried with compressed air
- The vehicle was placed on a lifting platform
- All three wheels were removed from the vehicle
- Three tyres were taken off the rims (tyres at least 30 years off, difficult removal)
Condition of three tyres checked (tested under water)
- Three tyres and one inner tube replaced and mounted
- Brake drum and front brake disassembled
- Brake shoes checked and cleaned, Bowden cables checked
- Brake drum mounted and front brake adjusted
- Brake drums and rear brake disassembled
- Brake shoes checked and cleaned
- Wheel brake cylinder checked for leakage and function
- Brake drum mounted and rear brake adjusted
- Rear brake master cylinder and brake lines checked
- Chain oil
- Chain box cover removed
- Chains and housing cleaned with benzine from the inside
- Chain box cover mounted with new seals
- Chain drive adjusted
- Chain box oil refilled
- Differential oil drained
- Differential rinsed
- Differential oil refilled
The motor won’t start - error search:
- Carburettor disassembled, cleaned and reinstalled
- Old petrol drained from fuel tank
- Petrol tap checked for patency
- Exhaust detached from cylinder and checked for blockage
- Engine cover removed
- Compression tested
- Ignition coil checked, part disassembled
- All cables with plugs of the engine electric system checked/measured, stator plate disassembled
- Breaker points adjusted
- All cables of the engin electrical system de-soldered and re-soldered, stator plate installed and ignition adjusted
- Ignition coil installed and wired
- New spark plug
- Vehicle battery installed with refilled acid
- Petrol mix prepared and vehicle refuelled
- Engine cover and exhaust mounted
- Shifting gate cleaned, gotten to working order and lubricated
- All Bowden cables checked and adjusted
Electrical system and lighting checked
- All cables checked/meaured
- Indicator relay measured
- Various bulbs replaced
- Plug-in contacts cleaned
- Cabin floor smoothed down and prepared for GFRP
- Holes in the floor closed with GFRP mats
- In consultation with the customer
No documents.
Ready for technical inspection.
This motorcycle can be viewed and collected in Wuppertal, Germany.
Μπορεί επίσης να σας αρέσει
Αυτό το αντικείμενο παρουσιάστηκε στο
Πώς να πραγματοποιήσετε αγορές στην Catawiki
1. Ανακαλύψτε κάτι ιδιαίτερο
2. Υποβάλετε την κορυφαία προσφορά
3. Πληρώστε με ασφάλεια