Pioneer - VSX - 407RDS - Pro Logic - Dolby envolvente Amplificador integrado de estado sólido
N.º 83787667
Pioneer - Preamplificador C-77, Amplificador de potencia M-77 - Equipo de sonido estéreo
N.º 83787667
Pioneer - Preamplificador C-77, Amplificador de potencia M-77 - Equipo de sonido estéreo
Up for sale is a very fine-condition Pioneer C77 pre-amplifier and a Pioneer M77 power amplifier from my personal collection.
A rare Japan domestic market model. This is a true heavyweight with exceptional sound quality, featuring inexhaustible power and dynamic range. Not to be confused with the Spec1-Spec2 series.
The devices were serviced about one and a half years ago. The servicing was performed by Retroaudio, who have over 30 years of research, development, and professional experience.
Service details include:
•Replacement of 16 capacitors (with quality enhancements)
•Cleaning of panel connectors
•Replacement of speaker and high-current relays
•Adjustment of AB class bias points
•Replacement of speaker terminals with quality connectors
•Maintenance of all controls
Pioneer M77 Stereo power amplifier:
Circuit system First stage cascade connection differential amplification triple push-pull
Pure complimentary service OCL circuit
Effective power
(Both channel drive, 20 Hz to 20 kHz) 250W + 250W (4 Ω)
250W + 250W (8 Ω)
Harmonic distortion factor (20 Hz to 20 kHz) Effective power : 0.1%
0.05% at 125W output (8 Ω)
1W output (8 Ω) : 0.05%
Cross modulation distortion factor
(50 Hz : 7 kHz = 4 : 1, 8 Ω) Effective power : 0.1%
0.05% at 125W output
0.05% at 1W output
Output Bandwidth (IHF, both channel drives) 5 Hz ~ 30 kHz (Distortion Factor 0.1%)
Frequency characteristic 5 Hz to 80 kHz + 0 -1dB
Input terminal Input : 2V/50k Ω
Output terminal Speaker : 4 Ω, 8 Ω
Damping factor 50 (20 Hz ~ 20 kHz, 8 Ω)
Signal-to-noise ratio 110 dB (IHF, A-network, short circuit)
Semiconductor used Transistor : 55
Diode, Other : 81
Power supply voltage 100 V, 50Hz/60Hz
Power consumption (Electrical Appliance and Material Control Law) 450W
Maximum Power Consumption 1200W
External dimensions Width 480x Height 186.5x Depth 445 mm
Weight 24.3kg
Pioneer C77: Stereo preamplifier
Circuit system Equalizer amplifier : first stage differential 3-stage direct connection, last stage A-class SEPP
Control amplifier section : first stage differential 3-stage direct connection final stage A class SEPP
Input terminal Phono1 : 2.5mV/50k Ω
Phono2 : 2.5 mV to 10mV/50k Ω
MIC : 2.5mV/50k Ω
Tuner, AUX1, 2 : 150mV/100k Ω
Tape Play1, 2 : 150mV/100k Ω
Phono maximum allowable input
(Harmonic distortion rate 0.05%, 1 kHz) Phono1:500mV
Phono2 : 500 mV to 1000 mV
Output terminal Tape Rec1, 2 : 150mV/2.2k Ω
Output (RL : 50k Ω) : 2V/600 Ω, 7V/600 Ω
Harmonic distortion factor (20 Hz to 20 kHz) 0.03% (2 v Output)
0.05% (7 v Output)
Frequency characteristic Phono1, 2 : 20 Hz to 20 kHz ± 0.2 dB
Tuner, AUX, TapePlay : 10 hz to 70 khz + 0 to 0.5 db
Signal-to-noise ratio (IHF, A-network
Short circuit) Phono:74dB
Tuner, AUX, TapePlay : 90 dB
Tone control
(1.5 dB step)
Bass Main : ± 7.5 dB (100 Hz)
Sub : ± 4.5 dB (50 Hz)
Treble Main : ± 7.5 dB (10 kHz)
Sub : ± 4.5 dB (20 kHz)
Filter Low : 15 Hz, 30 Hz (12dB/oct.)
High : 12 kHz, 8 kHz (12dB/oct.)
Attenuator 0, -15, -30dB
Semiconductor used IC : 2
Transistor : 50
Diode, Other : 31
Power supply voltage 100 V, 50Hz/60Hz
Power consumption (Electrical Appliance and Material Control Law) 17W
External dimensions Width 480x Height 186.5x Depth 365 mm
Weight 11.2kg
Please note, a 230V to 110V power converter is required to use these devices.
The devices will be shipped in two packages, carefully packed in double-wall cardboard boxes with foam padding.
También te podrían interesar
Este objeto apareció en
Cómo comprar en Catawiki
1. Descubre algo especial
2. Haz la puja más alta
3. Paga de manera segura