Yamaha - CR-700- Ricevitore stereo a stato solido
N. 84401463
Non più disponibile
Offerte chiuse
6 giorni fa
Yamaha - CA-600 - Pre-principale Amplificatore integrato a stato solido
Description
The Yamaha CA-600 has a front panel designed for the last word in control convenience, balanced by luxury wood cabinetry.
Unit is in excellent condition has been recently revised and serviced by a pro technician on the 4 March 2024. for long durability and reliability for the next owner.
This what has been serviced to the unit for your own benefit!
- Repaired the pre-amp stage.
- Recalibrated the bias for both channels left and right.
- I was able to get 59 Watts x 2 @ 8 ohms before clipping with 1 KHz sinewave input source.
SPECS:
Power output: 30 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 50kHz
Total harmonic distortion: 0.1%
Damping factor: 70
Input sensitivity: 2.5mV (mic), 3mV (MM), 120mV (line)
Signal to noise ratio: 70dB (mic), 80dB (MM), 90dB (line)
Channel separation: 50dB (MM), 50dB (line)
Output: 120mV (line), 0.775V (Pre out)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 39 x transistors, 6 x diodes, 6 x zener diodes
Dimensions: 436 x 144 x 323mm
Weight: 11.5kg
N. 84401463
Non più disponibile
Yamaha - CA-600 - Pre-principale Amplificatore integrato a stato solido
Description
The Yamaha CA-600 has a front panel designed for the last word in control convenience, balanced by luxury wood cabinetry.
Unit is in excellent condition has been recently revised and serviced by a pro technician on the 4 March 2024. for long durability and reliability for the next owner.
This what has been serviced to the unit for your own benefit!
- Repaired the pre-amp stage.
- Recalibrated the bias for both channels left and right.
- I was able to get 59 Watts x 2 @ 8 ohms before clipping with 1 KHz sinewave input source.
SPECS:
Power output: 30 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 50kHz
Total harmonic distortion: 0.1%
Damping factor: 70
Input sensitivity: 2.5mV (mic), 3mV (MM), 120mV (line)
Signal to noise ratio: 70dB (mic), 80dB (MM), 90dB (line)
Channel separation: 50dB (MM), 50dB (line)
Output: 120mV (line), 0.775V (Pre out)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 39 x transistors, 6 x diodes, 6 x zener diodes
Dimensions: 436 x 144 x 323mm
Weight: 11.5kg
Potrebbero interessarti anche
Imposta un’allerta di ricerca
Imposta un’allerta di ricerca per ricevere una notifica quando sono disponibili nuove corrispondenze.
Questo oggetto era presente in
Come fare acquisti su Catawiki
1. Scopri oggetti speciali
2. Fai l’offerta più alta
3. Paga in tutta sicurezza