Kef - PSW-2500 - Active Subwoofer Luidspreker
Nr. 83298051
Digidesign - High-Fidelity Synchronizer SMPTE Slave Driver MH034 SSD - - Muziekinstrumenten - Verenigde Staten van Amerika (Zonder Minimumprijs)
Nr. 83298051
Digidesign - High-Fidelity Synchronizer SMPTE Slave Driver MH034 SSD - - Muziekinstrumenten - Verenigde Staten van Amerika (Zonder Minimumprijs)
High-Fidelity Synchronizer SMPTE Slave Driver MH034 SSD
Made in U.S.A.
Serial number: A02571
The Digidesign SMPTE Slave Driver™ is a hardware device designed to provide high-fidelity, direct hardware synchronization of Digidesign’s Pro Tools™, Sound Tools II™, or ProMaster 20™ digital recording &
editing systems to external Longitudinal SMPTE Time code (LTC).
When used with any of the above systems, the SMPTE Slave Driver allows you to achieve high-fidelity LTC
synchronization with any digital or analog audio or video tape recorder. This makes the SMPTE Slave Driver
a excellent complement to your Digidesign recording & editing system for synchronization applications such
as overdubbing, machine-to-machine lock, and track bouncing—as well as music scoring or other nonVertical Interval Time Code video applications.
Technical Specifications
LTC Input: Balanced XLR female connector -20 to +22 dBu level 200 k differential input
impedance
LTC Output: Balanced XLR male connector 2.5 V p-p balanced (+3.8 dBu RMS) ohms
output impedance
Slave Clock Output: 256 times Sample Rate HCTTL level 75 ohm BNC connector
Slave Clock Input: 256 times Sample Rate HCTTL level 75 ohm BNC connector
External Clock Input: 1 or 256 times Sample Rate
rear panel switch selectable
HCTTL level
75 ohm BNC connector
MIDI MTC Output: 5-pin DIN connector
MIDI current loop
Mac MTC Output: 8-pin mini DIN connector
RS-422 levels, 1 MHz clock rate
SYS-EX Input: Mac: 8-pin mini DIN connector, RS-422 levels
MIDI: 5-pin DIN connector, MIDI current loop, reverse polarity
protected rear panel switch selectable Mac / MIDI
Input/Output Sample Rates: 44.1 kHz, 48 kHz, 44.056 kHz, 47.952 kHz (pull-down), 44.144 kHz, 48.048 kHz
(pull-up)
Input/Output LTC 30 FPS Non-Drop
30 FPS Drop
29.97 FPS Non-Drop
29.97 FPS Drop
25 FPS
24 FPS
Varispeed range: Nominal rate ± 10%
SMPTE Input Indication: LED lights when LTC is applied to LTC input connector
Lock Indication: LED lights when total position error is less than ± 5 LTC cells (±0.0625 frames)
Speed Calibration Indication: LED lights steadily when Slave Clock Output frequency is equal to 256 times the
nominal Sample Rate (as indicated on the front panel) ± 250 ppm. Slow flash for
underspeed, fast flash for overspeed.
AC Input: 90 to 260 VAC, 47 to 63 Hz, 43 Watts MAX
Dimensions: 1 rack-unit, 19” W x 10.5” D x 1.7” H
Weight: 4.1 lbs.
Digidesign SMPTE Slave Driver
Misschien vind je dit ook interessant
Dit object was te vinden in
Zo koop je op Catawiki
1. Ontdek iets bijzonders
2. Plaats het hoogste bod
3. Veilig betalen