Yamaha - CA-600 - Pre-Main Faststoff integrert forsterker
Nr. 84401463
Ikke lenger tilgjengelig
Budgivning avsluttet
1 uke siden
Yamaha - CA-600 - Pre-Main Faststoff integrert forsterker
Description
The Yamaha CA-600 has a front panel designed for the last word in control convenience, balanced by luxury wood cabinetry.
Unit is in excellent condition has been recently revised and serviced by a pro technician on the 4 March 2024. for long durability and reliability for the next owner.
This what has been serviced to the unit for your own benefit!
- Repaired the pre-amp stage.
- Recalibrated the bias for both channels left and right.
- I was able to get 59 Watts x 2 @ 8 ohms before clipping with 1 KHz sinewave input source.
SPECS:
Power output: 30 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 50kHz
Total harmonic distortion: 0.1%
Damping factor: 70
Input sensitivity: 2.5mV (mic), 3mV (MM), 120mV (line)
Signal to noise ratio: 70dB (mic), 80dB (MM), 90dB (line)
Channel separation: 50dB (MM), 50dB (line)
Output: 120mV (line), 0.775V (Pre out)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 39 x transistors, 6 x diodes, 6 x zener diodes
Dimensions: 436 x 144 x 323mm
Weight: 11.5kg
Nr. 84401463
Ikke lenger tilgjengelig
Yamaha - CA-600 - Pre-Main Faststoff integrert forsterker
Description
The Yamaha CA-600 has a front panel designed for the last word in control convenience, balanced by luxury wood cabinetry.
Unit is in excellent condition has been recently revised and serviced by a pro technician on the 4 March 2024. for long durability and reliability for the next owner.
This what has been serviced to the unit for your own benefit!
- Repaired the pre-amp stage.
- Recalibrated the bias for both channels left and right.
- I was able to get 59 Watts x 2 @ 8 ohms before clipping with 1 KHz sinewave input source.
SPECS:
Power output: 30 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 50kHz
Total harmonic distortion: 0.1%
Damping factor: 70
Input sensitivity: 2.5mV (mic), 3mV (MM), 120mV (line)
Signal to noise ratio: 70dB (mic), 80dB (MM), 90dB (line)
Channel separation: 50dB (MM), 50dB (line)
Output: 120mV (line), 0.775V (Pre out)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 39 x transistors, 6 x diodes, 6 x zener diodes
Dimensions: 436 x 144 x 323mm
Weight: 11.5kg
Du vil kanskje også like
Legg inn et søkevarsel
Angi et søkevarsel for å bli varslet når nye treff er tilgjengelige.
Dette objektet ble vist i
Hvordan kjøpe på Catawiki
1. Oppdag noe spesielt
2. Legg inn det høyeste budet
3. Å gjøre en sikker betaling