Yamaha - CA-600 - Pré-Principal Amplificador integrado de estado sólido
N.º 83441443
Já não está disponível
Licitação fechada
Há 1 semana
Yamaha - CA-600 - Pré-Principal Amplificador integrado de estado sólido
Description
The Yamaha CA-600 has a front panel designed for the last word in control convenience, balanced by luxury wood cabinetry.
Unit is in excellent condition has been recently revised and serviced by a pro technician on the 4 March 2024. for long durability and reliability for the next owner.
This what has been serviced to the unit for your own benefit!
- Repaired the pre-amp stage.
- Recalibrated the bias for both channels left and right.
- I was able to get 59 Watts x 2 @ 8 ohms before clipping with 1 KHz sinewave input source.
SPECS:
Power output: 30 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 50kHz
Total harmonic distortion: 0.1%
Damping factor: 70
Input sensitivity: 2.5mV (mic), 3mV (MM), 120mV (line)
Signal to noise ratio: 70dB (mic), 80dB (MM), 90dB (line)
Channel separation: 50dB (MM), 50dB (line)
Output: 120mV (line), 0.775V (Pre out)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 39 x transistors, 6 x diodes, 6 x zener diodes
Dimensions: 436 x 144 x 323mm
Weight: 11.5kg
N.º 83441443
Já não está disponível
Yamaha - CA-600 - Pré-Principal Amplificador integrado de estado sólido
Description
The Yamaha CA-600 has a front panel designed for the last word in control convenience, balanced by luxury wood cabinetry.
Unit is in excellent condition has been recently revised and serviced by a pro technician on the 4 March 2024. for long durability and reliability for the next owner.
This what has been serviced to the unit for your own benefit!
- Repaired the pre-amp stage.
- Recalibrated the bias for both channels left and right.
- I was able to get 59 Watts x 2 @ 8 ohms before clipping with 1 KHz sinewave input source.
SPECS:
Power output: 30 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 50kHz
Total harmonic distortion: 0.1%
Damping factor: 70
Input sensitivity: 2.5mV (mic), 3mV (MM), 120mV (line)
Signal to noise ratio: 70dB (mic), 80dB (MM), 90dB (line)
Channel separation: 50dB (MM), 50dB (line)
Output: 120mV (line), 0.775V (Pre out)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 39 x transistors, 6 x diodes, 6 x zener diodes
Dimensions: 436 x 144 x 323mm
Weight: 11.5kg
Também poderá gostar
Definir um alerta de pesquisa
Defina um alerta de pesquisa para ser notificado quando surgirem novos resultados.
Este objeto foi mostrado em
Como comprar na Catawiki
1. Descubra algo especial
2. Faça a licitação vencedora
3. Faça um pagamento seguro