Nr 52552185

Inte längre tillgänglig
Piaggio - Vespa Gigante - 125 cc - 1951
Budgivning avslutad
128 veckor sedan

Piaggio - Vespa Gigante - 125 cc - 1951

Piaggio Vespa Gigante – ‘51 model, handcrafted in 2011. Replica of the one built by Corradino d’Ascanio for advertising purposes and presented at the 1951 Fiera del Ciclo e Motociclo in Milan in the presence of the President of the Republic. Made in 2:1 scale which, in fact, corresponds to a volume and weight 8 times greater than the ‘standard’ version. Dimensions: Length 360 cm; Width 140 cm; Height 200 cm. Weight: 900 kg. The construction took 8 months, with a total of 2000 working hours, in addition to the design phase. Spacial features: - Bodywork: handmade by panelbeater - Engine: aluminium crankcase castings, handcrafted steel parts (cylinder, fan/flywheel). - Other handmade steel parts: seats, starter lever, brake pedal, handlebars and lever supports, carburettor, fuel cap, air lever - Cast aluminium parts: air grip, handlebar controls, rubber footpeg bar mountings - Custom-made rubber parts with specific moulds: grips, rubber footpeg bars, brake and starter pedal rubber, bonnet seals, clutch cable guards. Two stabilising wheels were installed for safety reasons. Historical notes: Enrico Piaggio’s aim was to make the Vespa part of the ‘Myth’ and he commissioned Corradino d’Ascanio. Playing on the difference between ‘vision’ and ‘perception’, D’Ascanio invented a Vespa that deceived those who saw it. In fact, the human brain didn’t perceive a giant Vespa with a normal person on it, but a normal Vespa with a miniature person on it. The ‘Vespone’ toured Italy for advertising purposes in 1951-52 and was extremely successful. D’Ascanio had thus managed to find a place in the ‘Myth’ for the Vespa. Located in Macerata – Italy. Transport is facilitated by an experienced transporter. The exact estimate of the costs will be notified after the auction. Approximately: up to 1000 km, €1500 – 1000 to 2000 km, approx. €2500. It has some small oxidation spots in some chrome parts (e.g. seat springs). The Vespa Gigante is a sculpture, it does not have any type of working engine, it is not a vehicle The original 1:1 Vespa is not included in the lot.

Nr 52552185

Inte längre tillgänglig
Piaggio - Vespa Gigante - 125 cc - 1951

Piaggio - Vespa Gigante - 125 cc - 1951

Piaggio Vespa Gigante – ‘51 model, handcrafted in 2011.

Replica of the one built by Corradino d’Ascanio for advertising purposes and presented at the 1951 Fiera del Ciclo e Motociclo in Milan in the presence of the President of the Republic.

Made in 2:1 scale which, in fact, corresponds to a volume and weight 8 times greater than the ‘standard’ version.

Dimensions:
Length 360 cm;
Width 140 cm;
Height 200 cm.
Weight: 900 kg.

The construction took 8 months, with a total of 2000 working hours, in addition to the design phase.

Spacial features:
- Bodywork: handmade by panelbeater
- Engine: aluminium crankcase castings, handcrafted steel parts (cylinder, fan/flywheel).
- Other handmade steel parts: seats, starter lever, brake pedal, handlebars and lever supports, carburettor, fuel cap, air lever
- Cast aluminium parts: air grip, handlebar controls, rubber footpeg bar mountings
- Custom-made rubber parts with specific moulds: grips, rubber footpeg bars, brake and starter pedal rubber, bonnet seals, clutch cable guards.

Two stabilising wheels were installed for safety reasons.

Historical notes:
Enrico Piaggio’s aim was to make the Vespa part of the ‘Myth’ and he commissioned Corradino d’Ascanio. Playing on the difference between ‘vision’ and ‘perception’, D’Ascanio invented a Vespa that deceived those who saw it. In fact, the human brain didn’t perceive a giant Vespa with a normal person on it, but a normal Vespa with a miniature person on it. The ‘Vespone’ toured Italy for advertising purposes in 1951-52 and was extremely successful. D’Ascanio had thus managed to find a place in the ‘Myth’ for the Vespa.

Located in Macerata – Italy.
Transport is facilitated by an experienced transporter.
The exact estimate of the costs will be notified after the auction.
Approximately: up to 1000 km, €1500 – 1000 to 2000 km, approx. €2500.

It has some small oxidation spots in some chrome parts (e.g. seat springs).

The Vespa Gigante is a sculpture, it does not have any type of working engine, it is not a vehicle

The original 1:1 Vespa is not included in the lot.

Skapa en sökbevakning
Skapa en sökbevakning för att få ett meddelande när nya matchningar är tillgängliga.

Detta objekt förekom i

                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    

Hur du köper på Catawiki

Läs mer om vårt Köparskydd

      1. Upptäck något speciellt

      Bläddra bland tusentals speciella objekt som valts ut av experter. Se foton, detaljer och uppskattat värde för varje speciellt objekt. 

      2. Lägg det högsta budet

      Hitta något du älskar och lägg det högsta budet. Du kan följa auktionen till slutet eller låta vårt system sköta budgivningen åt dig. Allt du behöver göra är att ställa in ett bud på det maximala belopp du vill betala. 

      3. Gör en säker betalning

      Betala för ditt speciella objekt så håller vi din betalning säker tills det anländer välbehållet. Vi använder ett pålitligt betalningssystem för att hantera alla transaktioner. 

Har du något liknande att sälja?

Oavsett om du är ny på onlineauktioner eller säljer professionellt kan vi hjälpa dig att tjäna mer på dina speciella föremål.

Sälj ditt objekt