Nr 83298051

Såld
Digidesign - High-Fidelity Synchronizer SMPTE Slave Driver MH034 SSD -  - Musikinstrument - USA  (Utan reservationspris)
Slutgiltigt bud
€ 1
1 vecka sedan

Digidesign - High-Fidelity Synchronizer SMPTE Slave Driver MH034 SSD - - Musikinstrument - USA (Utan reservationspris)

High-Fidelity Synchronizer SMPTE Slave Driver MH034 SSD Made in U.S.A. Serial number: A02571 The Digidesign SMPTE Slave Driver™ is a hardware device designed to provide high-fidelity, direct hardware synchronization of Digidesign’s Pro Tools™, Sound Tools II™, or ProMaster 20™ digital recording & editing systems to external Longitudinal SMPTE Time code (LTC). When used with any of the above systems, the SMPTE Slave Driver allows you to achieve high-fidelity LTC synchronization with any digital or analog audio or video tape recorder. This makes the SMPTE Slave Driver a excellent complement to your Digidesign recording & editing system for synchronization applications such as overdubbing, machine-to-machine lock, and track bouncing—as well as music scoring or other nonVertical Interval Time Code video applications. Technical Specifications LTC Input: Balanced XLR female connector -20 to +22 dBu level 200 k differential input impedance LTC Output: Balanced XLR male connector 2.5 V p-p balanced (+3.8 dBu RMS) ohms output impedance Slave Clock Output: 256 times Sample Rate HCTTL level 75 ohm BNC connector Slave Clock Input: 256 times Sample Rate HCTTL level 75 ohm BNC connector External Clock Input: 1 or 256 times Sample Rate rear panel switch selectable HCTTL level 75 ohm BNC connector MIDI MTC Output: 5-pin DIN connector MIDI current loop Mac MTC Output: 8-pin mini DIN connector RS-422 levels, 1 MHz clock rate SYS-EX Input: Mac: 8-pin mini DIN connector, RS-422 levels MIDI: 5-pin DIN connector, MIDI current loop, reverse polarity protected rear panel switch selectable Mac / MIDI Input/Output Sample Rates: 44.1 kHz, 48 kHz, 44.056 kHz, 47.952 kHz (pull-down), 44.144 kHz, 48.048 kHz (pull-up) Input/Output LTC 30 FPS Non-Drop 30 FPS Drop 29.97 FPS Non-Drop 29.97 FPS Drop 25 FPS 24 FPS Varispeed range: Nominal rate ± 10% SMPTE Input Indication: LED lights when LTC is applied to LTC input connector Lock Indication: LED lights when total position error is less than ± 5 LTC cells (±0.0625 frames) Speed Calibration Indication: LED lights steadily when Slave Clock Output frequency is equal to 256 times the nominal Sample Rate (as indicated on the front panel) ± 250 ppm. Slow flash for underspeed, fast flash for overspeed. AC Input: 90 to 260 VAC, 47 to 63 Hz, 43 Watts MAX Dimensions: 1 rack-unit, 19” W x 10.5” D x 1.7” H Weight: 4.1 lbs. Digidesign SMPTE Slave Driver

Nr 83298051

Såld
Digidesign - High-Fidelity Synchronizer SMPTE Slave Driver MH034 SSD -  - Musikinstrument - USA  (Utan reservationspris)

Digidesign - High-Fidelity Synchronizer SMPTE Slave Driver MH034 SSD - - Musikinstrument - USA (Utan reservationspris)

High-Fidelity Synchronizer SMPTE Slave Driver MH034 SSD
Made in U.S.A.
Serial number: A02571

The Digidesign SMPTE Slave Driver™ is a hardware device designed to provide high-fidelity, direct hardware synchronization of Digidesign’s Pro Tools™, Sound Tools II™, or ProMaster 20™ digital recording &
editing systems to external Longitudinal SMPTE Time code (LTC).
When used with any of the above systems, the SMPTE Slave Driver allows you to achieve high-fidelity LTC
synchronization with any digital or analog audio or video tape recorder. This makes the SMPTE Slave Driver
a excellent complement to your Digidesign recording & editing system for synchronization applications such
as overdubbing, machine-to-machine lock, and track bouncing—as well as music scoring or other nonVertical Interval Time Code video applications.

Technical Specifications
LTC Input: Balanced XLR female connector -20 to +22 dBu level 200 k differential input
impedance
LTC Output: Balanced XLR male connector 2.5 V p-p balanced (+3.8 dBu RMS) ohms
output impedance
Slave Clock Output: 256 times Sample Rate HCTTL level 75 ohm BNC connector
Slave Clock Input: 256 times Sample Rate HCTTL level 75 ohm BNC connector
External Clock Input: 1 or 256 times Sample Rate
rear panel switch selectable
HCTTL level
75 ohm BNC connector
MIDI MTC Output: 5-pin DIN connector
MIDI current loop
Mac MTC Output: 8-pin mini DIN connector
RS-422 levels, 1 MHz clock rate
SYS-EX Input: Mac: 8-pin mini DIN connector, RS-422 levels
MIDI: 5-pin DIN connector, MIDI current loop, reverse polarity
protected rear panel switch selectable Mac / MIDI
Input/Output Sample Rates: 44.1 kHz, 48 kHz, 44.056 kHz, 47.952 kHz (pull-down), 44.144 kHz, 48.048 kHz
(pull-up)
Input/Output LTC 30 FPS Non-Drop
30 FPS Drop
29.97 FPS Non-Drop
29.97 FPS Drop
25 FPS
24 FPS
Varispeed range: Nominal rate ± 10%
SMPTE Input Indication: LED lights when LTC is applied to LTC input connector
Lock Indication: LED lights when total position error is less than ± 5 LTC cells (±0.0625 frames)
Speed Calibration Indication: LED lights steadily when Slave Clock Output frequency is equal to 256 times the
nominal Sample Rate (as indicated on the front panel) ± 250 ppm. Slow flash for
underspeed, fast flash for overspeed.
AC Input: 90 to 260 VAC, 47 to 63 Hz, 43 Watts MAX
Dimensions: 1 rack-unit, 19” W x 10.5” D x 1.7” H
Weight: 4.1 lbs.
Digidesign SMPTE Slave Driver

Skapa en sökbevakning
Skapa en sökbevakning för att få ett meddelande när nya matchningar är tillgängliga.

Detta objekt förekom i

                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    

Hur du köper på Catawiki

Läs mer om vårt Köparskydd

      1. Upptäck något speciellt

      Bläddra bland tusentals speciella objekt som valts ut av experter. Se foton, detaljer och uppskattat värde för varje speciellt objekt. 

      2. Lägg det högsta budet

      Hitta något du älskar och lägg det högsta budet. Du kan följa auktionen till slutet eller låta vårt system sköta budgivningen åt dig. Allt du behöver göra är att ställa in ett bud på det maximala belopp du vill betala. 

      3. Gör en säker betalning

      Betala för ditt speciella objekt så håller vi din betalning säker tills det anländer välbehållet. Vi använder ett pålitligt betalningssystem för att hantera alla transaktioner. 

Har du något liknande att sälja?

Oavsett om du är ny på onlineauktioner eller säljer professionellt kan vi hjälpa dig att tjäna mer på dina speciella föremål.

Sälj ditt objekt