UFOGRAPHY MAPC STING Close Up 150mm MACRO 4x Canon EOS EF 微距镜头





Catawiki买家保障
在您收到物品之前,您的付款将在我们这里受到安全保管。查看详细信息
Trustpilot 4.4分 | 134281条评论
在Trustpilot上被评为优秀。
UFOGRAPHY MAPC STING Close Up 150mm MACRO 4x Canon EOS EF,宏拍摄套件,兼容所有 Canon EOS EF 相机;物理状态 优秀,功能状态 已测试并工作。
卖家的描述
MAPC STING
近拍 150mm 宏观 4x 佳能 EOS EF
产自意大利
微距摄影套件,兼容所有带有 Canon EOS EF 卡口的单反相机。
采用传统探针技术,以经济的方式接近微距摄影。
对焦是在接近被摄体时实现的,手动曝光 M,调整快门时间和 ISO。
完整套件包含铝制的显微镜 RMS 物镜,放大倍数为 4x,带后盖。
在现场表现良好,对焦距离只有距被摄体几毫米。
极好的放大倍率,适合业余和实验用途。
手持拍摄困难,只有几毫米的变化就会改变被摄体的对焦。
最佳效果来自三脚架和合适的微距照明。
可拆卸的套件采用 3D PLA 打印。
与机身的配合良好,具备经典的卡扣咔嗒感。
相机不包含在内
Macro photography kit, compatible with all Canon EOS EF cameras
Traditional probe technique for an economical approach to macro photography.
The focus is getting closer to the subject, manual exposure M, adjusting time and ISO.
Complete kit with metal microscope eyepiece with 4x factor and rear cap.
In the field it performs well, the focus takes place a few mm from the subject.
Excellent magnification factor, suitable for amateur and experimental use.
Difficult to photograph handheld, a few millimeters change the focus of the subject.
best results are obtained with a tripod and suitable macro lighting.
The demountable kit is printed in 3D PLA.
Good coupling with the camera body, with the classic coupling click.
The camera is not included
MAPC STING
近拍 150mm 宏观 4x 佳能 EOS EF
产自意大利
微距摄影套件,兼容所有带有 Canon EOS EF 卡口的单反相机。
采用传统探针技术,以经济的方式接近微距摄影。
对焦是在接近被摄体时实现的,手动曝光 M,调整快门时间和 ISO。
完整套件包含铝制的显微镜 RMS 物镜,放大倍数为 4x,带后盖。
在现场表现良好,对焦距离只有距被摄体几毫米。
极好的放大倍率,适合业余和实验用途。
手持拍摄困难,只有几毫米的变化就会改变被摄体的对焦。
最佳效果来自三脚架和合适的微距照明。
可拆卸的套件采用 3D PLA 打印。
与机身的配合良好,具备经典的卡扣咔嗒感。
相机不包含在内
Macro photography kit, compatible with all Canon EOS EF cameras
Traditional probe technique for an economical approach to macro photography.
The focus is getting closer to the subject, manual exposure M, adjusting time and ISO.
Complete kit with metal microscope eyepiece with 4x factor and rear cap.
In the field it performs well, the focus takes place a few mm from the subject.
Excellent magnification factor, suitable for amateur and experimental use.
Difficult to photograph handheld, a few millimeters change the focus of the subject.
best results are obtained with a tripod and suitable macro lighting.
The demountable kit is printed in 3D PLA.
Good coupling with the camera body, with the classic coupling click.
The camera is not included

