UFOGRAPHY MAPC STING Close Up 150mm MACRO 4x Canon EOS EF 微距镜头





Catawiki买家保障
在您收到物品之前,您的付款将在我们这里受到安全保管。查看详细信息
Trustpilot 4.4分 | 135837条评论
在Trustpilot上被评为优秀。
卖家的描述
MAPC STING
Close Up 150mm MACRO 4x Canon EOS EF
MADE IN ITALY
微距摄影套件,兼容所有 Canon EOS EF 单反相机。
传统探针式技术,以经济方式实现微距摄影。
对焦靠近主体,对焦时以手动曝光 M,调整快门和 ISO。
完整套件包含金属显微镜物镜,放大倍数为 4x,后盖。
在现场表现良好,对焦距离主体仅几毫米。
极佳的放大倍数,适合业余和实验性使用。
手持拍摄较困难,几毫米的变化会改变主体的对焦。
最好在三脚架和合适的微距照明下获得最佳效果。
可拆卸套件以 3D PLA 打印。
与机身的配合良好,带有经典的卡扣式锚定。
相机不包括在内
Macro photography kit, compatible with all Canon EOS EF cameras
Traditional probe technique for an economical approach to macro photography.
The focus is getting closer to the subject, manual exposure M, adjusting time and ISO.
Complete kit with metal microscope eyepiece with 4x factor and rear cap.
In the field it performs well, the focus takes place a few mm from the subject.
Excellent magnification factor, suitable for amateur and experimental use.
Difficult to photograph handheld, a few millimeters change the focus of the subject.
best results are obtained with a tripod and suitable macro lighting.
The demountable kit is printed in 3D PLA.
Good coupling with the camera body, with the classic coupling click.
The camera is not included
MAPC STING
Close Up 150mm MACRO 4x Canon EOS EF
MADE IN ITALY
微距摄影套件,兼容所有 Canon EOS EF 单反相机。
传统探针式技术,以经济方式实现微距摄影。
对焦靠近主体,对焦时以手动曝光 M,调整快门和 ISO。
完整套件包含金属显微镜物镜,放大倍数为 4x,后盖。
在现场表现良好,对焦距离主体仅几毫米。
极佳的放大倍数,适合业余和实验性使用。
手持拍摄较困难,几毫米的变化会改变主体的对焦。
最好在三脚架和合适的微距照明下获得最佳效果。
可拆卸套件以 3D PLA 打印。
与机身的配合良好,带有经典的卡扣式锚定。
相机不包括在内
Macro photography kit, compatible with all Canon EOS EF cameras
Traditional probe technique for an economical approach to macro photography.
The focus is getting closer to the subject, manual exposure M, adjusting time and ISO.
Complete kit with metal microscope eyepiece with 4x factor and rear cap.
In the field it performs well, the focus takes place a few mm from the subject.
Excellent magnification factor, suitable for amateur and experimental use.
Difficult to photograph handheld, a few millimeters change the focus of the subject.
best results are obtained with a tripod and suitable macro lighting.
The demountable kit is printed in 3D PLA.
Good coupling with the camera body, with the classic coupling click.
The camera is not included

