PARASOUND - HALO 提示 5 - DAC / 固态集成放大器





Catawiki买家保障
在您收到物品之前,您的付款将在我们这里受到安全保管。查看详细信息
Trustpilot 4.4分 | 139958条评论
在Trustpilot上被评为优秀。
卖家的描述
HALO Integrated
Features
Preamp and DAC Features
Latest generation ESS Sabre32 Reference DAC (ES9018K2M)
最新一代 ESS Sabre32 Reference DAC(ES9018K2M)
Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit
异步 USB 2.0 支持 PCM 高达 384kHz/32-bit
USB input decodes Native DSD64, DSD128, DSD256 and DoP DSD
USB 输入解码原生 DSD64、DSD128、DSD256 及 DoP DSD
Windows USB drivers for ASIO & WASAPI - Download here
Windows USB 驱动程序用于 ASIO & WASAPI - 点击此处下载
Mac OS does not require any drivers
Mac OS 不需要任何驱动
Coax and optical accept PCM up to 192kHz/24-bit
同轴和光纤输入支持 PCM 高达 192kHz/24-bit
Analog bass management with high & low pass crossovers
带高低通分频的模拟低音管理
Home theater bypass input for surround sound integration
家庭影院旁路输入,便于环绕声整合
Front panel subwoofer level control
前面板低音炮音量控制
Dedicated high current headphone amplifier (TI TPA6120)
专用高电流耳机放大器(TI TPA6120)
Phono for MM & MC with 100 Ω or 47k Ω load
MM 与 MC 博采输入,负载为 100 Ω 或 47k Ω
Front panel Aux input with automatic +12 dB gain stage
前面板辅助输入,具自动 +12 dB 增益
5 pairs RCA line level Analog inputs
5 对 RCA 线路级模拟输入
1 pair XLR balanced Analog input
1 对 XLR 平衡模拟输入
Balanced XLR and RCA left and right preamp outputs
左/右平衡 XLR 以及 RCA 前级输出
1 balanced XLR and 2 RCA subwoofer outputs
1 对平衡 XLR 与 2 个 RCA 低音输出
Bass & treble controls with relay bypass from remote or front panel
低音与高音控制,可由遥控器或前面板继电器旁路
Rear panel IR input and IR loop output jacks
背部 IR 输入与 IR 回路输出插孔
12 Volt input and output to triggers
12 伏输入输出,供触发器使用
Back-lit remote control with discrete buttons
背光遥控器,独立按键
0.5w standby power consumption meets Energy Star & EU specs
待机功耗0.5W,符合 Energy Star 与欧盟规格
Power Amp Features
功放特性
160 Watts x 2 @ 8 Ohms (RMS, both channels driven)
8 Ohms 时 160 瓦特 x 2(RMS,双声道驱动)
240 Watts x 2 @ 4 Ohms (RMS, both channels driven)
4 Ohms 时 240 瓦特 x 2(RMS,双声道驱动)
Power amp circuit topology designed by legendary John Curl
功放电路拓扑由传奇人物 John Curl 设计
Direct amplifier input to bypass preamp section
直通放大器输入,旁路前置放大器部分
High bias class A/AB operation
高偏置工作在 A/AB 类
Oversized shielded toroid power transformer
超大屏蔽式环形变压器
Dual-mono power supply and power amplifier
双单声道电源与功放
40,000uF power supply filter capacitance
40,000µF 电源滤波电容
Matched JFET input stages and MOSFET driver stages
匹配的 JFET 输入级与 MOSFET 驱动级
12 high voltage/high current bipolar output transistors
12 只高压高电流双极输出晶体管
Heavy-duty 24k gold-plated 5-way speaker binding posts
重型 24k 金镀镍 5 路音箱绑定柱
Over temp and short circuit relay protection
过温与短路继电保护
HALO Integrated
Features
Preamp and DAC Features
Latest generation ESS Sabre32 Reference DAC (ES9018K2M)
最新一代 ESS Sabre32 Reference DAC(ES9018K2M)
Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit
异步 USB 2.0 支持 PCM 高达 384kHz/32-bit
USB input decodes Native DSD64, DSD128, DSD256 and DoP DSD
USB 输入解码原生 DSD64、DSD128、DSD256 及 DoP DSD
Windows USB drivers for ASIO & WASAPI - Download here
Windows USB 驱动程序用于 ASIO & WASAPI - 点击此处下载
Mac OS does not require any drivers
Mac OS 不需要任何驱动
Coax and optical accept PCM up to 192kHz/24-bit
同轴和光纤输入支持 PCM 高达 192kHz/24-bit
Analog bass management with high & low pass crossovers
带高低通分频的模拟低音管理
Home theater bypass input for surround sound integration
家庭影院旁路输入,便于环绕声整合
Front panel subwoofer level control
前面板低音炮音量控制
Dedicated high current headphone amplifier (TI TPA6120)
专用高电流耳机放大器(TI TPA6120)
Phono for MM & MC with 100 Ω or 47k Ω load
MM 与 MC 博采输入,负载为 100 Ω 或 47k Ω
Front panel Aux input with automatic +12 dB gain stage
前面板辅助输入,具自动 +12 dB 增益
5 pairs RCA line level Analog inputs
5 对 RCA 线路级模拟输入
1 pair XLR balanced Analog input
1 对 XLR 平衡模拟输入
Balanced XLR and RCA left and right preamp outputs
左/右平衡 XLR 以及 RCA 前级输出
1 balanced XLR and 2 RCA subwoofer outputs
1 对平衡 XLR 与 2 个 RCA 低音输出
Bass & treble controls with relay bypass from remote or front panel
低音与高音控制,可由遥控器或前面板继电器旁路
Rear panel IR input and IR loop output jacks
背部 IR 输入与 IR 回路输出插孔
12 Volt input and output to triggers
12 伏输入输出,供触发器使用
Back-lit remote control with discrete buttons
背光遥控器,独立按键
0.5w standby power consumption meets Energy Star & EU specs
待机功耗0.5W,符合 Energy Star 与欧盟规格
Power Amp Features
功放特性
160 Watts x 2 @ 8 Ohms (RMS, both channels driven)
8 Ohms 时 160 瓦特 x 2(RMS,双声道驱动)
240 Watts x 2 @ 4 Ohms (RMS, both channels driven)
4 Ohms 时 240 瓦特 x 2(RMS,双声道驱动)
Power amp circuit topology designed by legendary John Curl
功放电路拓扑由传奇人物 John Curl 设计
Direct amplifier input to bypass preamp section
直通放大器输入,旁路前置放大器部分
High bias class A/AB operation
高偏置工作在 A/AB 类
Oversized shielded toroid power transformer
超大屏蔽式环形变压器
Dual-mono power supply and power amplifier
双单声道电源与功放
40,000uF power supply filter capacitance
40,000µF 电源滤波电容
Matched JFET input stages and MOSFET driver stages
匹配的 JFET 输入级与 MOSFET 驱动级
12 high voltage/high current bipolar output transistors
12 只高压高电流双极输出晶体管
Heavy-duty 24k gold-plated 5-way speaker binding posts
重型 24k 金镀镍 5 路音箱绑定柱
Over temp and short circuit relay protection
过温与短路继电保护

