Roland - 物品件数: 1 - 吉他放大器 - 日本 (没有保留价)





| €10 | ||
|---|---|---|
| €9 | ||
| €6 | ||
Catawiki买家保障
在您收到物品之前,您的付款将在我们这里受到安全保管。查看详细信息
Trustpilot 4.4分 | 121899条评论
在Trustpilot上被评为优秀。
这款早期的罗兰Cube-20来自七十年代末,产自日本,经测试可正常使用,具备20瓦固态音色和真实弹簧混响,重量约7.5千克。
卖家的描述
Brand: Roland
Type of instrument/accessory: Guitar amplifier
Made in: Japan
Model: CUBE-20 (early model)
Era: Late 1970s
Colour: Cream / Off-white
Serial number: Not applicable
Type of wood body/neck: Not applicable (solid-state amplifier)
Type of tuners / pickups / neck joint: Not applicable
Parts replaced:
– Normal input jack has been replaced with a new part.
– Headphone jack and PCB were removed by a previous owner (non-functional).
All other parts appear original.
Damage / wear:
– Numerous scratches, scuffs, stains, and rust spots on the exterior
– Rusted areas have been treated with rust converter
– Cosmetic wear consistent with a 45+ year old amplifier
– Please check photos for full condition details
Repairs needed:
– None for normal use; the amplifier is fully working
– Future maintenance may be required due to vintage age
– Headphone output is not functional (removed)
Description
This is a vintage Roland CUBE-20, one of the early 20W models released in the late 1970s.
Compact yet powerful, this amplifier is well known for its clear, honest solid-state tone and its ability to handle not only guitars but also keyboards thanks to its neutral frequency response.
The design features a real spring reverb, providing deep and warm ambience from a compact unit.
The cabinet layout places the power transformer at the bottom for stable power delivery, while the reverb tank is mounted in the upper chamber to avoid vibration from the speaker.
The amp produces a natural overdrive when using the OVER DRIVE input, while the NORMAL input delivers clean and articulate tones.
Specifications
Output: 20W
Speaker: 20 cm × 1
Inputs: 2 (Overdrive / Normal)
Controls: Volume, Treble, Middle, Bass, Reverb, Master Volume
Power: AC 100V / 50–60Hz / 17W
Dimensions: 285mm (W) × 327mm (H) × 173mm (D)
Weight: approx. 7.5 kg
Headphone output: Removed / not available
Functionality
Produces sound normally
Both input channels work
No noticeable pot noise (“scratchy” knobs) at listing time
Reverb works properly
No issues affecting playability
Vintage electronics—future servicing may be needed as with any amp of this age
Shipping
The amplifier will be carefully wrapped with bubble wrap and packed in a strong cardboard box.
Shipped from Kanagawa, Japan, using Japan Post (Yu-Pack or International Parcel) with tracking.
Estimated package size: 100-size.
Important note
This is a vintage amplifier that has been used for nearly half a century.
There may be imperfections not fully described.
Sold as-is, with no returns, refunds, or complaints accepted.
Please bid only if you understand vintage electronics.
Brand: Roland
Type of instrument/accessory: Guitar amplifier
Made in: Japan
Model: CUBE-20 (early model)
Era: Late 1970s
Colour: Cream / Off-white
Serial number: Not applicable
Type of wood body/neck: Not applicable (solid-state amplifier)
Type of tuners / pickups / neck joint: Not applicable
Parts replaced:
– Normal input jack has been replaced with a new part.
– Headphone jack and PCB were removed by a previous owner (non-functional).
All other parts appear original.
Damage / wear:
– Numerous scratches, scuffs, stains, and rust spots on the exterior
– Rusted areas have been treated with rust converter
– Cosmetic wear consistent with a 45+ year old amplifier
– Please check photos for full condition details
Repairs needed:
– None for normal use; the amplifier is fully working
– Future maintenance may be required due to vintage age
– Headphone output is not functional (removed)
Description
This is a vintage Roland CUBE-20, one of the early 20W models released in the late 1970s.
Compact yet powerful, this amplifier is well known for its clear, honest solid-state tone and its ability to handle not only guitars but also keyboards thanks to its neutral frequency response.
The design features a real spring reverb, providing deep and warm ambience from a compact unit.
The cabinet layout places the power transformer at the bottom for stable power delivery, while the reverb tank is mounted in the upper chamber to avoid vibration from the speaker.
The amp produces a natural overdrive when using the OVER DRIVE input, while the NORMAL input delivers clean and articulate tones.
Specifications
Output: 20W
Speaker: 20 cm × 1
Inputs: 2 (Overdrive / Normal)
Controls: Volume, Treble, Middle, Bass, Reverb, Master Volume
Power: AC 100V / 50–60Hz / 17W
Dimensions: 285mm (W) × 327mm (H) × 173mm (D)
Weight: approx. 7.5 kg
Headphone output: Removed / not available
Functionality
Produces sound normally
Both input channels work
No noticeable pot noise (“scratchy” knobs) at listing time
Reverb works properly
No issues affecting playability
Vintage electronics—future servicing may be needed as with any amp of this age
Shipping
The amplifier will be carefully wrapped with bubble wrap and packed in a strong cardboard box.
Shipped from Kanagawa, Japan, using Japan Post (Yu-Pack or International Parcel) with tracking.
Estimated package size: 100-size.
Important note
This is a vintage amplifier that has been used for nearly half a century.
There may be imperfections not fully described.
Sold as-is, with no returns, refunds, or complaints accepted.
Please bid only if you understand vintage electronics.

