Ufography Mapc Sting Close Up 150mm Macro 4x Canon EOS EF 微距鏡頭





| €50 | ||
|---|---|---|
| €45 | ||
| €39 | ||
Catawiki買家保障
在您收到物品前,我們會妥善保管您的付款。查看詳情
Trustpilot評分 4.4 | 128779 則評論
在Trustpilot獲得極佳評等。
Ufography Mapc Sting Close Up 150mm Macro 4x 適用於 Canon EOS EF,物理狀況優秀,已測試並正常運作。
賣家描述
MAPC STING
Close Up 150mm MACRO 4x Canon EOS EF
MADE IN ITALY
套件名稱:宏攝影套件,兼容所有 Canon EOS EF 掃描反射相機。
以經濟方式接近微距攝影的傳統探針式技術。
對焦方式是靠近主體,手動曝光 M,調整快門與 ISO。
完整套件包含鋁合金顯微鏡物鏡,放大倍率為 4x,帶後蓋。
在現場使用時表現良好,對焦距主體僅有幾毫米距離。
具有出色的放大倍率,適合業餘與實驗用途。
手持拍攝較困難,幾毫米的變焦就能改變主體的對焦。
最佳效果需使用腳架和適當的微距照明。
可拆卸套件以 3D PLA 打印。
與機身的結合良好,帶有經典扣合聲。
相機本體不含在內。
Macro photography kit, compatible with all Canon EOS EF cameras
Traditional probe technique for an economical approach to macro photography.
The focus is getting closer to the subject, manual exposure M, adjusting time and ISO.
Complete kit with metal microscope eyepiece with 4x factor and rear cap.
In the field it performs well, the focus takes place a few mm from the subject.
Excellent magnification factor, suitable for amateur and experimental use.
Difficult to photograph handheld, a few millimeters change the focus of the subject.
best results are obtained with a tripod and suitable macro lighting.
The demountable kit is printed in 3D PLA.
Good coupling with the camera body, with the classic coupling click.
The camera is not included
MAPC STING
Close Up 150mm MACRO 4x Canon EOS EF
MADE IN ITALY
套件名稱:宏攝影套件,兼容所有 Canon EOS EF 掃描反射相機。
以經濟方式接近微距攝影的傳統探針式技術。
對焦方式是靠近主體,手動曝光 M,調整快門與 ISO。
完整套件包含鋁合金顯微鏡物鏡,放大倍率為 4x,帶後蓋。
在現場使用時表現良好,對焦距主體僅有幾毫米距離。
具有出色的放大倍率,適合業餘與實驗用途。
手持拍攝較困難,幾毫米的變焦就能改變主體的對焦。
最佳效果需使用腳架和適當的微距照明。
可拆卸套件以 3D PLA 打印。
與機身的結合良好,帶有經典扣合聲。
相機本體不含在內。
Macro photography kit, compatible with all Canon EOS EF cameras
Traditional probe technique for an economical approach to macro photography.
The focus is getting closer to the subject, manual exposure M, adjusting time and ISO.
Complete kit with metal microscope eyepiece with 4x factor and rear cap.
In the field it performs well, the focus takes place a few mm from the subject.
Excellent magnification factor, suitable for amateur and experimental use.
Difficult to photograph handheld, a few millimeters change the focus of the subject.
best results are obtained with a tripod and suitable macro lighting.
The demountable kit is printed in 3D PLA.
Good coupling with the camera body, with the classic coupling click.
The camera is not included

