Roland - 物品數量: 1 - 吉他擴大機 - 日本 (沒有保留價)





| €10 | ||
|---|---|---|
| €9 | ||
| €6 | ||
Catawiki買家保障
在您收到物品前,我們會妥善保管您的付款。查看詳情
Trustpilot評分 4.4 | 121798 則評論
在Trustpilot獲得極佳評等。
這款早期的羅蘭Cube-20,於七十年代末在日本製造,已測試可正常使用,具備20瓦固態音色與真實彈簧混響,重量約7.5公斤。
賣家描述
Brand: Roland
Type of instrument/accessory: Guitar amplifier
Made in: Japan
Model: CUBE-20 (early model)
Era: Late 1970s
Colour: Cream / Off-white
Serial number: Not applicable
Type of wood body/neck: Not applicable (solid-state amplifier)
Type of tuners / pickups / neck joint: Not applicable
Parts replaced:
– Normal input jack has been replaced with a new part.
– Headphone jack and PCB were removed by a previous owner (non-functional).
All other parts appear original.
Damage / wear:
– Numerous scratches, scuffs, stains, and rust spots on the exterior
– Rusted areas have been treated with rust converter
– Cosmetic wear consistent with a 45+ year old amplifier
– Please check photos for full condition details
Repairs needed:
– None for normal use; the amplifier is fully working
– Future maintenance may be required due to vintage age
– Headphone output is not functional (removed)
Description
This is a vintage Roland CUBE-20, one of the early 20W models released in the late 1970s.
Compact yet powerful, this amplifier is well known for its clear, honest solid-state tone and its ability to handle not only guitars but also keyboards thanks to its neutral frequency response.
The design features a real spring reverb, providing deep and warm ambience from a compact unit.
The cabinet layout places the power transformer at the bottom for stable power delivery, while the reverb tank is mounted in the upper chamber to avoid vibration from the speaker.
The amp produces a natural overdrive when using the OVER DRIVE input, while the NORMAL input delivers clean and articulate tones.
Specifications
Output: 20W
Speaker: 20 cm × 1
Inputs: 2 (Overdrive / Normal)
Controls: Volume, Treble, Middle, Bass, Reverb, Master Volume
Power: AC 100V / 50–60Hz / 17W
Dimensions: 285mm (W) × 327mm (H) × 173mm (D)
Weight: approx. 7.5 kg
Headphone output: Removed / not available
Functionality
Produces sound normally
Both input channels work
No noticeable pot noise (“scratchy” knobs) at listing time
Reverb works properly
No issues affecting playability
Vintage electronics—future servicing may be needed as with any amp of this age
Shipping
The amplifier will be carefully wrapped with bubble wrap and packed in a strong cardboard box.
Shipped from Kanagawa, Japan, using Japan Post (Yu-Pack or International Parcel) with tracking.
Estimated package size: 100-size.
Important note
This is a vintage amplifier that has been used for nearly half a century.
There may be imperfections not fully described.
Sold as-is, with no returns, refunds, or complaints accepted.
Please bid only if you understand vintage electronics.
Brand: Roland
Type of instrument/accessory: Guitar amplifier
Made in: Japan
Model: CUBE-20 (early model)
Era: Late 1970s
Colour: Cream / Off-white
Serial number: Not applicable
Type of wood body/neck: Not applicable (solid-state amplifier)
Type of tuners / pickups / neck joint: Not applicable
Parts replaced:
– Normal input jack has been replaced with a new part.
– Headphone jack and PCB were removed by a previous owner (non-functional).
All other parts appear original.
Damage / wear:
– Numerous scratches, scuffs, stains, and rust spots on the exterior
– Rusted areas have been treated with rust converter
– Cosmetic wear consistent with a 45+ year old amplifier
– Please check photos for full condition details
Repairs needed:
– None for normal use; the amplifier is fully working
– Future maintenance may be required due to vintage age
– Headphone output is not functional (removed)
Description
This is a vintage Roland CUBE-20, one of the early 20W models released in the late 1970s.
Compact yet powerful, this amplifier is well known for its clear, honest solid-state tone and its ability to handle not only guitars but also keyboards thanks to its neutral frequency response.
The design features a real spring reverb, providing deep and warm ambience from a compact unit.
The cabinet layout places the power transformer at the bottom for stable power delivery, while the reverb tank is mounted in the upper chamber to avoid vibration from the speaker.
The amp produces a natural overdrive when using the OVER DRIVE input, while the NORMAL input delivers clean and articulate tones.
Specifications
Output: 20W
Speaker: 20 cm × 1
Inputs: 2 (Overdrive / Normal)
Controls: Volume, Treble, Middle, Bass, Reverb, Master Volume
Power: AC 100V / 50–60Hz / 17W
Dimensions: 285mm (W) × 327mm (H) × 173mm (D)
Weight: approx. 7.5 kg
Headphone output: Removed / not available
Functionality
Produces sound normally
Both input channels work
No noticeable pot noise (“scratchy” knobs) at listing time
Reverb works properly
No issues affecting playability
Vintage electronics—future servicing may be needed as with any amp of this age
Shipping
The amplifier will be carefully wrapped with bubble wrap and packed in a strong cardboard box.
Shipped from Kanagawa, Japan, using Japan Post (Yu-Pack or International Parcel) with tracking.
Estimated package size: 100-size.
Important note
This is a vintage amplifier that has been used for nearly half a century.
There may be imperfections not fully described.
Sold as-is, with no returns, refunds, or complaints accepted.
Please bid only if you understand vintage electronics.

