Pioneer - A-717 MARK II Faststoff integrert forsterker





Legg til dine favoritter for å få et varsel når auksjonen begynner.
Catawiki kjøperbeskyttelse
Betalingen din er trygg hos oss helt til du mottar objektet ditt.Vis detaljer
Trustpilot 4.4 | 141736 anmeldelser
Vurdert utmerket på Trustpilot.
Beskrivelse fra selgeren
The Pioneer A-717 MK2 (Mark II) is an iconic, high-quality integrated stereo amplifier from Pioneer's legendary "Reference Stereo Amplifier" series. This heavyweight was built in the late 1980s (ca. 1988-1989) and is known for its flawless build quality, audiophile components and the ability to effortlessly control the most demanding speakers.
Main Features & Construction
Dual-Mono Construction: Internally, the amplifier is built strictly separated with two huge, cast transformers to minimize interference between the left and right channels.
Honeycomb Chassis: Pioneer used a unique honeycomb profile (Honeycomb chassis) and heavy cooling blocks to completely eliminate vibrations and resonances.
Non-Switching Type III: Dette ikke-svitsjende Type III-systemet byr på lydkvaliteten til en Klasse A-forsterker med effektiviteten til Klasse B, og gir en varm og svært detaljert lydkarakter.
Excellent Phono step: The built-in phono preamplifier is suitable for both MM (Moving Magnet) and MC (Moving Coil) elements, which is very popular among vinyl enthusiasts.
Technical Specifications
In the table below you will find the main specifications of the Pioneer A-717 MK2 according to the HiFi-Wiki documentation:
Component / Property Specification
Continuous power (8 Ohms) 2x 100 Watt (RMS, 20Hz - 20kHz, THD 0.003%)
Continuous power (4 Ohm) 2x 150 Watts
Frequency range 1 Hz - 150,000 Hz (+0 dB / -3 dB)
Total harmonic distortion (THD) 0.003%
Damping factor (1 kHz, 8 Ohm) 200
Signal-to-noise ratio (Line) 108dB
Inputs Phono (MM/MC), CD, Tuner, Line, 3x Tape
Dimensions (W x H x D) 420x162x435mm
Weight 19.9 kg (a real baking beast)
Unit has been tested and fully operational!
Historien til selger
The Pioneer A-717 MK2 (Mark II) is an iconic, high-quality integrated stereo amplifier from Pioneer's legendary "Reference Stereo Amplifier" series. This heavyweight was built in the late 1980s (ca. 1988-1989) and is known for its flawless build quality, audiophile components and the ability to effortlessly control the most demanding speakers.
Main Features & Construction
Dual-Mono Construction: Internally, the amplifier is built strictly separated with two huge, cast transformers to minimize interference between the left and right channels.
Honeycomb Chassis: Pioneer used a unique honeycomb profile (Honeycomb chassis) and heavy cooling blocks to completely eliminate vibrations and resonances.
Non-Switching Type III: Dette ikke-svitsjende Type III-systemet byr på lydkvaliteten til en Klasse A-forsterker med effektiviteten til Klasse B, og gir en varm og svært detaljert lydkarakter.
Excellent Phono step: The built-in phono preamplifier is suitable for both MM (Moving Magnet) and MC (Moving Coil) elements, which is very popular among vinyl enthusiasts.
Technical Specifications
In the table below you will find the main specifications of the Pioneer A-717 MK2 according to the HiFi-Wiki documentation:
Component / Property Specification
Continuous power (8 Ohms) 2x 100 Watt (RMS, 20Hz - 20kHz, THD 0.003%)
Continuous power (4 Ohm) 2x 150 Watts
Frequency range 1 Hz - 150,000 Hz (+0 dB / -3 dB)
Total harmonic distortion (THD) 0.003%
Damping factor (1 kHz, 8 Ohm) 200
Signal-to-noise ratio (Line) 108dB
Inputs Phono (MM/MC), CD, Tuner, Line, 3x Tape
Dimensions (W x H x D) 420x162x435mm
Weight 19.9 kg (a real baking beast)
Unit has been tested and fully operational!

