编号 107489549

已售出
制表匠工具  - Emco Unimat 车床
最终出价
€ 650
2周前

制表匠工具 - Emco Unimat 车床

NL - EN - DE - FR - ES - IT Emco Unimat DB - Horlogemakers gereedschap - hobby draaibankje. Uit de jaren 60. Komt met originele handleiding en originele opbergkist. !! Dit is de zware gietijzeren uitvoering van 15 kg. Frees/boor kolom om in een kleine handeling de machine om te bouwen naar boren/frezen. Nieuwe riemen en nog wat tools. Beschrijving Emco Unimat DB horlogemakers draaibankje, gemaakt in Oostenrijk, uit de jaren 1960-1970, in gebruikte staat, afmetingen 45 × 25 × 15 cm en gewicht 15 kg. Aangeboden wordt een , in Oostenrijk vervaardigd Emco Unimat DB draaibank. geschikt voor Hobbyisten Technische toestand: De mechaniek functioneert: de kruisslede en de slede bewegen soepel. De draaibank is onmiddellijk klaar voor gebruik bij levering. Voordelen van ontwerp: Draaibare vaste kop : Het unieke ontwerp maakt het mogelijk de vaste kop te draaien voor conisch draaien, schuin boren. Verstelbaar klembereik: Flexibele afstelling van de spindeleenheid voor het hanteren van complexe en niet-standaard werkstukken. Variabele snelheidregeling: De rotatiesnelheid wordt aangepast via een poelie riemsysteem, waardoor optimaal koppel en snelheid mogelijk zijn bij het bewerken van materialen variërend van zachte kunststoffen tot staal. Technische gegevens en afmetingen: Fabrikant: Emco (Maier & Co, Oostenrijk) Model: Emco Unimat DB Afmetingen (L x B x H): 45 x 25 x 15 cm Conditie: Schoongemaakt. Aandrijving: Originele Motor. 220volt. Kavel bevat: Emco unimat draaibankje. reserve riemen. Drieklauw. Boorkop. Kolom. Aandrijfriemen. Diverse Tools. Folder is geen onderdeel van de aankoop , slechts voor illustratie. Handleiding is eenvoudig op Internet te vinden. Verzending alleen in Europa. Voor hobbyist klokkenmaker horlogemaker goudsmid juwelier fijn mechaniker modelbouw tafel draaibank rc modelbouwer. Modelmaker Dobbermaker Horlogemakersgereedschap stoommachinebouwer. Mini draaibank Tafel draaibank. ============================================================================================ Emco Unimat DB – Watchmaker's tool – hobby lathe. From the 1960s. Comes with the original manual and original storage case.!! This is the heavy cast-iron version (15 kg). Milling/drilling column to convert the machine for drilling/milling operations. New belts and some additional tools. Description Emco Unimat DB watchmaker's lathe, made in Austria, dating from the 1960s–1970s; in used condition; dimensions 45 × 25 × 15 cm; weight 15 kg. Offered here is an Austrian-made Emco Unimat DB lathe, suitable for hobbyists. Technical condition: The mechanism is functional; the cross-slide and carriage move smoothly. The lathe is ready for immediate use upon delivery. Design advantages: Swiveling headstock: The unique design allows the headstock to be rotated for taper turning and angled drilling. Adjustable clamping range: Flexible adjustment of the spindle unit to handle complex and non-standard workpieces. Variable speed control: Rotational speed is adjusted via a pulley and belt system, allowing for optimal torque and speed when machining materials ranging from soft plastics to steel. Technical specifications and dimensions: Manufacturer: Emco (Maier & Co, Austria) Model: Emco Unimat DB Dimensions (L x W x H): 45 x 25 x 15 cm Condition: Cleaned. Drive: Original motor. 220V. Lot includes: Emco Unimat lathe. Spare belts. Three-jaw chuck. Drill chuck. Column. Drive belts. Various tools. Brochure is not included in the purchase; for illustration purposes only. Manual is easily found online. Shipping within Europe only. For hobbyist clockmakers, watchmakers, goldsmiths, jewelers, precision mechanics, model makers, RC modelers, float makers, and steam engine builders. Mini lathe / Bench lathe. ============================================================================================ Emco Unimat DB – Uhrmacherdrehbank – kleine Hobbydrehbank. Aus den 1960er Jahren. Dies ist die schwere Gusseisenversion mit einem Gewicht von 15 kg. Fräs-/Bohrsäule zur einfachen Umrüstung der Maschine zur Bohr-/Fräsmaschine. Neue Riemen und einige zusätzliche Werkzeuge. Inklusive Originalanleitung und Original-Aufbewahrungsbox. !! Beschreibung: Emco Unimat DB, kleine Uhrmacherdrehbank, hergestellt in Österreich, aus den 1960er/70er Jahren, gebraucht, Abmessungen 45 × 25 × 15 cm, Gewicht 15 kg. Angeboten wird eine in Österreich gefertigte Emco Unimat DB Drehbank. Geeignet für Hobbybastler. Technischer Zustand: Die Mechanik funktioniert: Querschlitten und Schlitten bewegen sich leichtgängig. Die Drehbank ist sofort einsatzbereit. Konstruktionsvorteile: Drehbarer Spindelstock: Die einzigartige Konstruktion ermöglicht das Drehen des Spindelstocks zum Kegeldrehen und Fasenbohren. Einstellbarer Spannbereich: Flexible Einstellung der Spindeleinheit für die Bearbeitung komplexer und nicht standardisierter Werkstücke. Variable Drehzahlregelung: Die Drehzahl wird über ein Riemenantriebssystem eingestellt und ermöglicht so optimales Drehmoment und optimale Drehzahl bei der Bearbeitung von Materialien von Weichkunststoffen bis hin zu Stahl. Technische Daten und Abmessungen: Hersteller: Emco (Maier & Co, Österreich) Modell: Emco Unimat DB Abmessungen (L x B x H): 45 x 25 x 15 cm Zustand: Gereinigt. Antrieb: Originalmotor. 220 Volt. Lieferumfang: Emco Unimat Drehmaschine. Ersatzriemen. Dreibackenfutter. Bohrfutter. Säule. Antriebsriemen. Diverse Werkzeuge. Die Broschüre ist nicht im Lieferumfang enthalten und dient nur der Veranschaulichung. Die Bedienungsanleitung ist im Internet leicht zu finden. Versand nur innerhalb Europas. Für Hobby-Uhrmacher, Goldschmiede, Juweliere, Feinmechaniker, Modellbauer, Tischdrehbänke, RC-Modellbauer. Modellbauer, Schwimmerbauer, Uhrmacherwerkzeuge, Dampfmaschinenbauer. Mini-Drehbank, Tischdrehbank. ===================================================================================== Tour d'horloger Emco Unimat DB - Petit tour de loisir. Années 1960. Version en fonte lourde (15 kg). Colonne de fraisage/perçage permettant de convertir facilement la machine en perceuse/fraiseuse. Courroies neuves et quelques outils supplémentaires. Description : Tour d'horloger Emco Unimat DB, petit modèle, fabriqué en Autriche dans les années 1960-1970. Occasion. Dimensions : 45 × 25 × 15 cm. Poids : 15 kg. Livré avec le manuel d'origine et la boîte de rangement d'origine.!!! Tour Emco Unimat DB, fabriqué en Autriche. Idéal pour les amateurs. État technique : Mécanisme fonctionnel : le chariot transversal et le chariot se déplacent sans à-coups. Prêt à l'emploi dès la livraison. Avantages : Pochette rotative : Sa conception unique permet la rotation de la poupée pour le tournage conique et le perçage en biseau. Plage de serrage réglable : Réglage flexible de la broche pour l’usinage de pièces complexes et non standard. Vitesse variable : La vitesse de rotation est ajustée par un système de poulies et courroies, permettant un couple et une vitesse optimaux pour l’usinage de matériaux allant des plastiques souples à l’acier. Caractéristiques techniques et dimensions : Fabricant : Emco (Maier & Co, Autriche) Modèle : Emco Unimat DB Dimensions (L x l x H) : 45 x 25 x 15 cm État : Nettoyé. Entraînement : Moteur d’origine. 220 volts. Contenu du lot : Tour Emco Unimat. Courroies de rechange. Mandrin à trois mors. Mandrin de perçage. Colonne. Courroies d’entraînement. Outils divers. La brochure n’est pas incluse dans la vente et est présentée à titre indicatif uniquement. Le manuel d’utilisation est facilement accessible en ligne. Livraison uniquement en Europe. Pour horlogers amateurs, orfèvres, bijoutiers, mécaniciens de précision, maquettistes, tourneurs sur table et constructeurs de modèles réduits radiocommandés. Outils d'horloger, de modélisme et de construction de machines à vapeur. Mini-tour, tour sur table. ================================================================================= Torno Emco Unimat DB - Herramienta de relojero - torno pequeño para aficionados. De la década de 1960. Esta es la versión robusta de hierro fundido, con un peso de 15 kg. Livré avec le manuel d'origine et la boîte de rangement d'origine. !! Columna de fresado/taladrado para convertir la máquina en fresadora/taladradora con una operación sencilla. Correas nuevas y algunas herramientas adicionales. Descripción: Torno pequeño Emco Unimat DB para relojeros, fabricado en Austria, de las décadas de 1960-1970, en buen estado de uso. Dimensiones: 45 × 25 × 15 cm. Peso: 15 kg. Se ofrece un torno Emco Unimat DB fabricado en Austria. Ideal para aficionados. Estado técnico: El mecanismo funciona correctamente: el carro transversal y el carro principal se mueven con suavidad. El torno está listo para usar inmediatamente después de la entrega. Ventajas de diseño: Cabezal giratorio: Su diseño único permite girar el cabezal para torneado cónico y taladrado biselado. Rango de sujeción ajustable: Ajuste flexible del husillo para el mecanizado de piezas complejas y no estándar. Control de velocidad variable: La velocidad de rotación se ajusta mediante un sistema de poleas y correas, lo que permite un par y una velocidad óptimos al mecanizar materiales que van desde plásticos blandos hasta acero. Datos técnicos y dimensiones: Fabricante: Emco (Maier & Co, Austria) Modelo: Emco Unimat DB Dimensiones (largo x ancho x alto): 45 x 25 x 15 cm Estado: Limpio. Motor: Motor original. 220 voltios. El lote incluye: Torno Emco Unimat. Correas de repuesto. Mandril de tres mordazas. Mandril para taladro. Columna. Correas de transmisión. Varias herramientas. El folleto no forma parte de la compra; se muestra únicamente con fines ilustrativos. El manual se puede encontrar fácilmente en internet. Envío solo dentro de Europa. Para aficionados a la relojería, orfebrería, joyería, mecánica de precisión, modelismo, tornos de mesa y modelismo RC. También se incluyen herramientas para modelismo, fabricación de flotadores y máquinas de vapor. Mini torno, torno de mesa. ===================================================================================== Tornio Emco Unimat DB - Utensile da orologiaio - piccolo tornio per hobbisti. Degli anni '60. Questa è la versione in ghisa pesante, del peso di 15 kg. Livré avec le manuel d'origine et la boîte de rangement d'origine.!! Colonna di fresatura/foratura per convertire la macchina in fresatrice/foratrice con una semplice operazione. Cinghie nuove e alcuni utensili aggiuntivi. Descrizione Tornio Emco Unimat DB per orologiai, di piccole dimensioni, prodotto in Austria, degli anni '60-'70, usato, dimensioni 45 × 25 × 15 cm e peso 15 kg. Si offre un tornio Emco Unimat DB prodotto in Austria. Adatto agli hobbisti. Condizioni tecniche: Il meccanismo funziona: la slitta trasversale e il carro si muovono fluidamente. Il tornio è immediatamente pronto all'uso al momento della consegna. Vantaggi di progettazione: Testa girevole: Il design esclusivo consente di ruotare la testa per la tornitura conica e la foratura obliqua. Campo di serraggio regolabile: Regolazione flessibile del gruppo mandrino per la lavorazione di pezzi complessi e non standard. Controllo della velocità variabile: la velocità di rotazione viene regolata tramite un sistema di pulegge e cinghie, consentendo di ottenere coppia e velocità ottimali nella lavorazione di materiali che vanno dalle plastiche morbide all'acciaio. Dati tecnici e dimensioni: Produttore: Emco (Maier & Co, Austria) Modello: Emco Unimat DB Dimensioni (L x P x A): 45 x 25 x 15 cm Condizioni: Pulito. Azionamento: Motore originale. 220 volt. Il lotto comprende: Tornio Emco Unimat. Cinghie di ricambio. Mandrino a tre griffe. Mandrino per trapano. Colonna. Cinghie di trasmissione. Vari utensili. La brochure non è inclusa nell'acquisto, è solo a scopo illustrativo. Il manuale è facilmente reperibile su Internet. Spedizione solo in Europa. Per hobbisti orologiai, orafi, gioiellieri, meccanici di precisione, modellisti, appassionati di torni da banco e di modellismo RC. Modellista, costruttore di galleggianti, attrezzi da orologiaio, costruttore di motori a vapore. Mini tornio, tornio da banco. =====================================================================================

编号 107489549

已售出
制表匠工具  - Emco Unimat 车床

制表匠工具 - Emco Unimat 车床


NL - EN - DE - FR - ES - IT

Emco Unimat DB - Horlogemakers gereedschap - hobby draaibankje.
Uit de jaren 60.
Komt met originele handleiding en originele opbergkist. !!
Dit is de zware gietijzeren uitvoering van 15 kg.
Frees/boor kolom om in een kleine handeling de machine om te bouwen naar boren/frezen.
Nieuwe riemen en nog wat tools.

Beschrijving
Emco Unimat DB horlogemakers draaibankje, gemaakt in Oostenrijk, uit de jaren 1960-1970, in gebruikte staat, afmetingen 45 × 25 × 15 cm en gewicht 15 kg.
Aangeboden wordt een , in Oostenrijk vervaardigd Emco Unimat DB draaibank. geschikt voor Hobbyisten Technische toestand: De mechaniek functioneert: de kruisslede en de slede bewegen soepel. De draaibank is onmiddellijk klaar voor gebruik bij levering.

Voordelen van ontwerp:

Draaibare vaste kop : Het unieke ontwerp maakt het mogelijk de vaste kop te draaien voor conisch draaien, schuin boren.

Verstelbaar klembereik: Flexibele afstelling van de spindeleenheid voor het hanteren van complexe en niet-standaard werkstukken.

Variabele snelheidregeling: De rotatiesnelheid wordt aangepast via een poelie riemsysteem, waardoor optimaal koppel en snelheid mogelijk zijn bij het bewerken van materialen variërend van zachte kunststoffen tot staal.

Technische gegevens en afmetingen:
Fabrikant: Emco (Maier & Co, Oostenrijk)

Model: Emco Unimat DB

Afmetingen (L x B x H): 45 x 25 x 15 cm

Conditie: Schoongemaakt.

Aandrijving: Originele Motor. 220volt.

Kavel bevat:
Emco unimat draaibankje.
reserve riemen.
Drieklauw.
Boorkop.
Kolom.
Aandrijfriemen.
Diverse Tools.

Folder is geen onderdeel van de aankoop , slechts voor illustratie.

Handleiding is eenvoudig op Internet te vinden.

Verzending alleen in Europa.

Voor hobbyist klokkenmaker horlogemaker goudsmid juwelier fijn mechaniker modelbouw tafel draaibank rc modelbouwer. Modelmaker Dobbermaker Horlogemakersgereedschap stoommachinebouwer.
Mini draaibank Tafel draaibank.
============================================================================================
Emco Unimat DB – Watchmaker's tool – hobby lathe.
From the 1960s.
Comes with the original manual and original storage case.!!
This is the heavy cast-iron version (15 kg).
Milling/drilling column to convert the machine for drilling/milling operations.
New belts and some additional tools.

Description
Emco Unimat DB watchmaker's lathe, made in Austria, dating from the 1960s–1970s; in used condition; dimensions 45 × 25 × 15 cm; weight 15 kg.
Offered here is an Austrian-made Emco Unimat DB lathe, suitable for hobbyists. Technical condition: The mechanism is functional; the cross-slide and carriage move smoothly. The lathe is ready for immediate use upon delivery.

Design advantages:

Swiveling headstock: The unique design allows the headstock to be rotated for taper turning and angled drilling.

Adjustable clamping range: Flexible adjustment of the spindle unit to handle complex and non-standard workpieces.

Variable speed control: Rotational speed is adjusted via a pulley and belt system, allowing for optimal torque and speed when machining materials ranging from soft plastics to steel.

Technical specifications and dimensions:
Manufacturer: Emco (Maier & Co, Austria)

Model: Emco Unimat DB

Dimensions (L x W x H): 45 x 25 x 15 cm

Condition: Cleaned.

Drive: Original motor. 220V.

Lot includes:
Emco Unimat lathe. Spare belts.
Three-jaw chuck.
Drill chuck.
Column.
Drive belts.
Various tools.

Brochure is not included in the purchase; for illustration purposes only.

Manual is easily found online.

Shipping within Europe only.

For hobbyist clockmakers, watchmakers, goldsmiths, jewelers, precision mechanics, model makers, RC modelers, float makers, and steam engine builders.
Mini lathe / Bench lathe.
============================================================================================
Emco Unimat DB – Uhrmacherdrehbank – kleine Hobbydrehbank.

Aus den 1960er Jahren.

Dies ist die schwere Gusseisenversion mit einem Gewicht von 15 kg.
Fräs-/Bohrsäule zur einfachen Umrüstung der Maschine zur Bohr-/Fräsmaschine.
Neue Riemen und einige zusätzliche Werkzeuge.
Inklusive Originalanleitung und Original-Aufbewahrungsbox. !!

Beschreibung: Emco Unimat DB, kleine Uhrmacherdrehbank, hergestellt in Österreich, aus den 1960er/70er Jahren, gebraucht, Abmessungen 45 × 25 × 15 cm, Gewicht 15 kg.
Angeboten wird eine in Österreich gefertigte Emco Unimat DB Drehbank. Geeignet für Hobbybastler. Technischer Zustand: Die Mechanik funktioniert: Querschlitten und Schlitten bewegen sich leichtgängig. Die Drehbank ist sofort einsatzbereit.

Konstruktionsvorteile:

Drehbarer Spindelstock: Die einzigartige Konstruktion ermöglicht das Drehen des Spindelstocks zum Kegeldrehen und Fasenbohren. Einstellbarer Spannbereich: Flexible Einstellung der Spindeleinheit für die Bearbeitung komplexer und nicht standardisierter Werkstücke.

Variable Drehzahlregelung: Die Drehzahl wird über ein Riemenantriebssystem eingestellt und ermöglicht so optimales Drehmoment und optimale Drehzahl bei der Bearbeitung von Materialien von Weichkunststoffen bis hin zu Stahl.

Technische Daten und Abmessungen:

Hersteller: Emco (Maier & Co, Österreich)

Modell: Emco Unimat DB

Abmessungen (L x B x H): 45 x 25 x 15 cm

Zustand: Gereinigt.

Antrieb: Originalmotor. 220 Volt.

Lieferumfang:

Emco Unimat Drehmaschine.
Ersatzriemen.
Dreibackenfutter.
Bohrfutter.
Säule.
Antriebsriemen.
Diverse Werkzeuge.

Die Broschüre ist nicht im Lieferumfang enthalten und dient nur der Veranschaulichung.

Die Bedienungsanleitung ist im Internet leicht zu finden.

Versand nur innerhalb Europas. Für Hobby-Uhrmacher, Goldschmiede, Juweliere, Feinmechaniker, Modellbauer, Tischdrehbänke, RC-Modellbauer. Modellbauer, Schwimmerbauer, Uhrmacherwerkzeuge, Dampfmaschinenbauer.

Mini-Drehbank, Tischdrehbank.

=====================================================================================
Tour d'horloger Emco Unimat DB - Petit tour de loisir.

Années 1960.

Version en fonte lourde (15 kg).

Colonne de fraisage/perçage permettant de convertir facilement la machine en perceuse/fraiseuse.

Courroies neuves et quelques outils supplémentaires.

Description : Tour d'horloger Emco Unimat DB, petit modèle, fabriqué en Autriche dans les années 1960-1970. Occasion. Dimensions : 45 × 25 × 15 cm. Poids : 15 kg.
Livré avec le manuel d'origine et la boîte de rangement d'origine.!!!

Tour Emco Unimat DB, fabriqué en Autriche. Idéal pour les amateurs. État technique : Mécanisme fonctionnel : le chariot transversal et le chariot se déplacent sans à-coups. Prêt à l'emploi dès la livraison.

Avantages :

Pochette rotative : Sa conception unique permet la rotation de la poupée pour le tournage conique et le perçage en biseau. Plage de serrage réglable : Réglage flexible de la broche pour l’usinage de pièces complexes et non standard.

Vitesse variable : La vitesse de rotation est ajustée par un système de poulies et courroies, permettant un couple et une vitesse optimaux pour l’usinage de matériaux allant des plastiques souples à l’acier.

Caractéristiques techniques et dimensions :

Fabricant : Emco (Maier & Co, Autriche)

Modèle : Emco Unimat DB

Dimensions (L x l x H) : 45 x 25 x 15 cm

État : Nettoyé.

Entraînement : Moteur d’origine. 220 volts.

Contenu du lot :

Tour Emco Unimat.

Courroies de rechange.

Mandrin à trois mors.

Mandrin de perçage.

Colonne.

Courroies d’entraînement.

Outils divers.

La brochure n’est pas incluse dans la vente et est présentée à titre indicatif uniquement.

Le manuel d’utilisation est facilement accessible en ligne.

Livraison uniquement en Europe. Pour horlogers amateurs, orfèvres, bijoutiers, mécaniciens de précision, maquettistes, tourneurs sur table et constructeurs de modèles réduits radiocommandés. Outils d'horloger, de modélisme et de construction de machines à vapeur.

Mini-tour, tour sur table.


=================================================================================
Torno Emco Unimat DB - Herramienta de relojero - torno pequeño para aficionados.

De la década de 1960.

Esta es la versión robusta de hierro fundido, con un peso de 15 kg.
Livré avec le manuel d'origine et la boîte de rangement d'origine. !!

Columna de fresado/taladrado para convertir la máquina en fresadora/taladradora con una operación sencilla.

Correas nuevas y algunas herramientas adicionales.

Descripción: Torno pequeño Emco Unimat DB para relojeros, fabricado en Austria, de las décadas de 1960-1970, en buen estado de uso. Dimensiones: 45 × 25 × 15 cm. Peso: 15 kg.

Se ofrece un torno Emco Unimat DB fabricado en Austria. Ideal para aficionados. Estado técnico: El mecanismo funciona correctamente: el carro transversal y el carro principal se mueven con suavidad. El torno está listo para usar inmediatamente después de la entrega.

Ventajas de diseño:

Cabezal giratorio: Su diseño único permite girar el cabezal para torneado cónico y taladrado biselado. Rango de sujeción ajustable: Ajuste flexible del husillo para el mecanizado de piezas complejas y no estándar.

Control de velocidad variable: La velocidad de rotación se ajusta mediante un sistema de poleas y correas, lo que permite un par y una velocidad óptimos al mecanizar materiales que van desde plásticos blandos hasta acero.

Datos técnicos y dimensiones:

Fabricante: Emco (Maier & Co, Austria)

Modelo: Emco Unimat DB

Dimensiones (largo x ancho x alto): 45 x 25 x 15 cm

Estado: Limpio.

Motor: Motor original. 220 voltios.

El lote incluye:

Torno Emco Unimat.

Correas de repuesto.

Mandril de tres mordazas.

Mandril para taladro.

Columna.

Correas de transmisión.

Varias herramientas.

El folleto no forma parte de la compra; se muestra únicamente con fines ilustrativos.

El manual se puede encontrar fácilmente en internet.

Envío solo dentro de Europa. Para aficionados a la relojería, orfebrería, joyería, mecánica de precisión, modelismo, tornos de mesa y modelismo RC. También se incluyen herramientas para modelismo, fabricación de flotadores y máquinas de vapor.

Mini torno, torno de mesa.

=====================================================================================
Tornio Emco Unimat DB - Utensile da orologiaio - piccolo tornio per hobbisti.

Degli anni '60.

Questa è la versione in ghisa pesante, del peso di 15 kg.
Livré avec le manuel d'origine et la boîte de rangement d'origine.!!
Colonna di fresatura/foratura per convertire la macchina in fresatrice/foratrice con una semplice operazione.
Cinghie nuove e alcuni utensili aggiuntivi.

Descrizione
Tornio Emco Unimat DB per orologiai, di piccole dimensioni, prodotto in Austria, degli anni '60-'70, usato, dimensioni 45 × 25 × 15 cm e peso 15 kg.

Si offre un tornio Emco Unimat DB prodotto in Austria. Adatto agli hobbisti. Condizioni tecniche: Il meccanismo funziona: la slitta trasversale e il carro si muovono fluidamente. Il tornio è immediatamente pronto all'uso al momento della consegna.

Vantaggi di progettazione:

Testa girevole: Il design esclusivo consente di ruotare la testa per la tornitura conica e la foratura obliqua. Campo di serraggio regolabile: Regolazione flessibile del gruppo mandrino per la lavorazione di pezzi complessi e non standard. Controllo della velocità variabile: la velocità di rotazione viene regolata tramite un sistema di pulegge e cinghie, consentendo di ottenere coppia e velocità ottimali nella lavorazione di materiali che vanno dalle plastiche morbide all'acciaio.

Dati tecnici e dimensioni:

Produttore: Emco (Maier & Co, Austria)

Modello: Emco Unimat DB

Dimensioni (L x P x A): 45 x 25 x 15 cm

Condizioni: Pulito.

Azionamento: Motore originale. 220 volt.

Il lotto comprende:

Tornio Emco Unimat.
Cinghie di ricambio.
Mandrino a tre griffe.
Mandrino per trapano.
Colonna.
Cinghie di trasmissione.
Vari utensili.

La brochure non è inclusa nell'acquisto, è solo a scopo illustrativo.

Il manuale è facilmente reperibile su Internet.

Spedizione solo in Europa. Per hobbisti orologiai, orafi, gioiellieri, meccanici di precisione, modellisti, appassionati di torni da banco e di modellismo RC. Modellista, costruttore di galleggianti, attrezzi da orologiaio, costruttore di motori a vapore.

Mini tornio, tornio da banco.

=====================================================================================

最终出价
€ 650
Ashley Calvert
专家
估价  € 850 - € 1,000

类似物品

  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​

类别为您准备的

复古及工业家具

  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
设置搜索提醒
设置搜索提醒,以便在有新匹配项目时随时收到通知。

该物品出现在

                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    

如何在Catawiki上购买

详细了解我们的买家保障

      1. 发现奇珍异品

      饱览数以千计的专家精选的稀奇物品。查看每件稀奇物品的照片、详情和估价。 

      2. 设置最高出价

      找到您喜欢的物品并设置最高出价。您可以关注拍卖直到最后,也可以让系统为您出价。您只需设置可接受的最高出价。 

      3. 安全支付

      当您付款拍下心仪的稀奇物品后,我们会确保货款的安全,直至物品安然交付与您。我们使用受信赖的支付系统来处理所有交易。 

有类似的东西要出售吗?

无论您是在线拍卖的新手还是专业销售,我们都可以帮助您为您的独特物品赚取更多收入。

出售您的物品