Ronson - 没有保留价 - 打火机 - 复合材料

06
天
22
小时
10
分钟
27
秒
开始出价
€ 1
没有保留价
Sebastian Schulze
专家
由Sebastian Schulze精选

在复古钢笔和拍卖咨询方面拥有 20 多年的专业知识。

估价  € 150 - € 200
没有出价记录

Catawiki买家保障

在您收到物品之前,您的付款将在我们这里受到安全保管。查看详细信息

Trustpilot 4.4分 | 144581条评论

在Trustpilot上被评为优秀。

卖家的描述

Ronson Petrol Penciliter
Louis V Aronson - Art Metal Works inc, Newark, NJ, USA
First generation Ronson Penciliter by Art Metal Works, 1930s, Art Deco petrol lighter and propelling pencil, US, UK and Canadian patents

The Penciliter put a lighter and a propelling pencil in a single pocket piece. The clip works the lighter, and the cone twists to advance the lead. It was made in Newark, New Jersey by Art Metal Works, the firm behind the Ronson name, to patents taken out by its founder Louis V. Aronson.

This is a first generation example, produced from around 1934 until the outbreak of the war, when Ronson production turned to war work. The body carries the fine geometric engine turning of the Art Deco period, and the patent block near the top gives the United States, United Kingdom and Canadian numbers, which is the marking found on the early version rather than on the post-war one.

The patent dates of 1925 and 1926 refer to Aronson’s lighter mechanism, which Art Metal Works continued to mark for years after the grant. They establish the design and its protection rather than the year this example left the factory.

Condition is very good. The lighter sparks and has a wick though I have not fired it. The pencil advances cleanly or needs attention. The plating shows light wear consistent with pocket use, with brassing at the high points / clip. The patent imprint is clear and reproduced below.

It is sold unfuelled, since lighters must be posted empty. A fresh flint, a wick if needed and standard lighter fuel will return it to use.

Specification

Maker: Art Metal Works, Newark, New Jersey, makers of Ronson
Model: Penciliter, first generation
Period: circa 1934 to 1940
Patents: United States, United Kingdom and Canada, dated 1925 and 1926, marked at the top of the case
Design: Louis V. Aronson
Finish: plating, geometric engine turned body
Lead: usually 1.1mm rather than the later 0.9mm
Length: 15cm
Lighter: petrol, clip-operated
DES.Pat.92.996.
Canada Pat 288,148 -BR.pat.291,695- US pat RE.No19.023

Ronson Petrol Penciliter
Louis V Aronson - Art Metal Works inc, Newark, NJ, USA
First generation Ronson Penciliter by Art Metal Works, 1930s, Art Deco petrol lighter and propelling pencil, US, UK and Canadian patents

The Penciliter put a lighter and a propelling pencil in a single pocket piece. The clip works the lighter, and the cone twists to advance the lead. It was made in Newark, New Jersey by Art Metal Works, the firm behind the Ronson name, to patents taken out by its founder Louis V. Aronson.

This is a first generation example, produced from around 1934 until the outbreak of the war, when Ronson production turned to war work. The body carries the fine geometric engine turning of the Art Deco period, and the patent block near the top gives the United States, United Kingdom and Canadian numbers, which is the marking found on the early version rather than on the post-war one.

The patent dates of 1925 and 1926 refer to Aronson’s lighter mechanism, which Art Metal Works continued to mark for years after the grant. They establish the design and its protection rather than the year this example left the factory.

Condition is very good. The lighter sparks and has a wick though I have not fired it. The pencil advances cleanly or needs attention. The plating shows light wear consistent with pocket use, with brassing at the high points / clip. The patent imprint is clear and reproduced below.

It is sold unfuelled, since lighters must be posted empty. A fresh flint, a wick if needed and standard lighter fuel will return it to use.

Specification

Maker: Art Metal Works, Newark, New Jersey, makers of Ronson
Model: Penciliter, first generation
Period: circa 1934 to 1940
Patents: United States, United Kingdom and Canada, dated 1925 and 1926, marked at the top of the case
Design: Louis V. Aronson
Finish: plating, geometric engine turned body
Lead: usually 1.1mm rather than the later 0.9mm
Length: 15cm
Lighter: petrol, clip-operated
DES.Pat.92.996.
Canada Pat 288,148 -BR.pat.291,695- US pat RE.No19.023

详细资料

时代
1900-2000
物品件数
1
制造商/品牌
Ronson
材质
复合材料
国家
美国
状态
状态良好 - 使用过,稍有老化的迹象及缺陷
正常运转状态
是的
长度
15 cm
时间段
1930-1940
英国经验证
3
已售出的几件物品
个人

类似物品

  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​

类别为您准备的

钢笔及打火机

  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​