編號 102056961

無法使用
Sansui - B-77 放大器、C-77 前置放大器、RG-7 均衡器 Hi-fi 音響組 - 多種型號
競投已結束
3 週前

Sansui - B-77 放大器、C-77 前置放大器、RG-7 均衡器 Hi-fi 音響組 - 多種型號

Sansui B-77 Amplifier, C-77 Pre-amplifier and RG-7 Equalizer set! A well regarded treasure for the vintage enthusiastic. Hi-Fi made in Japan. Tested with headset plug and working. Please see pictures as those form part of the description. Small few marks, but not significant considering the equipment age. Top metal cover has signs of rust. Comes with power cords. Included: an extension cord (due to power cable from the pre-amplifier quite short). Sansui B-77 is a stereo power amplifier of 60 watts per channel, made in Japan, between 1980-1983. Core Technical Specifications - Power output (RMS, both channels driven, 20–20,000 Hz): 60 W per channel into 8 Ω - Power output (1 kHz): 70 W per channel into 8 Ω - Total harmonic distortion (THD): ≤ 0.03% at or below rated output - Frequency response: 5 Hz – 70 kHz (+0 dB / –2 dB) - Signal‑to‑noise ratio: 115 dB - Input sensitivity / impedance: 1 V / 47 kΩ (for rated output) Electrical & Power - Power consumption: 255 W (rated)- 350 W (maximum) - Voltage: 220–240 V (50/60 Hz) Physical Characteristics - Dimensions: 430 × 148 × 230 mm (W × H × D) - Weight: 6.4 kg - Finish: Silver aluminum front plate Connectivity - Speaker outputs: 2 pairs (A/B switching) (can use A, B and A+B) - Headset connection Input: - RCA from pre-amplifier Special features: - LED peak display - Spectral analyzer - Auto dimmer Sansui C-77 pre-amplifier made in Japan, between 1980-1982 Core Audio Performance - Frequency response: 5 Hz – 70 kHz (+0.5 dB / –2 dB) - Total harmonic distortion (THD): ≤ 0.03% (AUX, TUNER, TAPE at 1 kHz, 1 V) - RIAA equalization accuracy (Phono): ±0.5 dB Input Sensitivity & Impedance - Phono MM: 2.5 mV / 47 kΩ (max input 100 mV) - Phono MC: 0.18 mV (HiFi Engine) or 0.1 mV / 10 Ω (HiFi‑Wiki) — depending on region - Line inputs (AUX, TUNER, TAPE PLAY): 150 mV / 47 kΩ - Microphone input: 7 mV (HiFi Engine) Output Levels - Line output: 150 mV / 47 kΩ - Pre‑out: 1.0 V / 47 kΩ - Tape REC: 150 mV / 47 kΩ Noise & S/N Ratio - Phono MC: 60 dB (HiFi Engine) or 62 dB (HiFi‑Wiki) - Phono MM: 80 dB - Line inputs: 90 dB Tone & Filter Controls - Bass: ±10 dB at 50 Hz - Treble: ±10 dB at 10 kHz - Low filter: 30 Hz, 6 dB/octave - High filter: 7 kHz, 6 dB/octave Power & Build - Power supply: AC 220–240 V - Dimensions: 430 × 74 × 247 mm - Weight: 3.1 kg - Finish: Silver aluminum front plate Background & Position in Sansui Lineup The C‑77 was part of Sansui’s early‑80s “slimline” separates, typically paired with the B‑77 power amplifier. It offered both MM and MC phono stages, making it suitable for high‑quality vinyl playback even by modern standards. Sansui RG-7 is a 10 band graphic equalizer made in Japan, between 1981-1983 Core Audio Specifications - Frequency response: 20 Hz – 20 kHz (±0 / –0.5 dB) - Total harmonic distortion: 0.05% (20 Hz–20 kHz, 1 V output) - Signal‑to‑noise ratio: 70 dB (A‑weighted, short‑circuit) - Channel separation: 60 dB at 1 kHz Equalizer Section - 10 frequency bands: 30, 60, 125, 250, 500, 1k, 2k, 4k, 8k, 16 kHz - Control range: ±12 dB per band - Semiconductors: 19 ICs, 10 transistors, 6 diodes, 4 zener diodes Inputs & Sensitivities - Source / Tape Play: 150 mV / 47 kΩ (max input 5 V) - Microphone: 0.8 mV / 10 kΩ (max 25 mV) - Guitar: 9 mV / 100 kΩ Outputs - Tape Rec: 150 mV - Pre‑amp output: 150 mV Special Features - Electronic reverb using BBD (Bucket Brigade Device) delay circuit — more natural than spring reverb units - Pan‑pot function for moving the stereo image freely (useful with microphones) - Two microphone inputs with mixing capability - Guitar input with selectable routing - Front‑panel effect assignment (line and/or mic) Power & Build - Power consumption: 16 W - Voltage: 220–240 V - Dimensions: 430 × 87 × 228 mm - Weight: 3.3 kg (net) - Finish: Silver aluminum front plate Position in Sansui’s Lineup The RG‑7 was part of Sansui’s early‑80s “sound consolette” series, combining EQ, reverb, mic mixing, and guitar input in one unit—aimed at home musicians, karaoke setups, and users wanting creative sound shaping beyond standard equalization. Shipment: total weight approx. 19 kg. Shipment will be packed with care and extra protection for transportation.

編號 102056961

無法使用
Sansui - B-77 放大器、C-77 前置放大器、RG-7 均衡器 Hi-fi 音響組 - 多種型號

Sansui - B-77 放大器、C-77 前置放大器、RG-7 均衡器 Hi-fi 音響組 - 多種型號

Sansui B-77 Amplifier, C-77 Pre-amplifier and RG-7 Equalizer set!

A well regarded treasure for the vintage enthusiastic. Hi-Fi made in Japan. Tested with headset plug and working.

Please see pictures as those form part of the description. Small few marks, but not significant considering the equipment age. Top metal cover has signs of rust.
Comes with power cords. Included: an extension cord (due to power cable from the pre-amplifier quite short).

Sansui B-77 is a stereo power amplifier of 60 watts per channel, made in Japan, between 1980-1983.

Core Technical Specifications
- Power output (RMS, both channels driven, 20–20,000 Hz): 60 W per channel into 8 Ω
- Power output (1 kHz): 70 W per channel into 8 Ω
- Total harmonic distortion (THD): ≤ 0.03% at or below rated output
- Frequency response: 5 Hz – 70 kHz (+0 dB / –2 dB)
- Signal‑to‑noise ratio: 115 dB
- Input sensitivity / impedance: 1 V / 47 kΩ (for rated output)

Electrical & Power
- Power consumption: 255 W (rated)- 350 W (maximum)
- Voltage: 220–240 V (50/60 Hz)

Physical Characteristics
- Dimensions: 430 × 148 × 230 mm (W × H × D)
- Weight: 6.4 kg
- Finish: Silver aluminum front plate

Connectivity
- Speaker outputs: 2 pairs (A/B switching) (can use A, B and A+B)
- Headset connection

Input:
- RCA from pre-amplifier

Special features:
- LED peak display
- Spectral analyzer
- Auto dimmer

Sansui C-77 pre-amplifier made in Japan, between 1980-1982

Core Audio Performance
- Frequency response: 5 Hz – 70 kHz (+0.5 dB / –2 dB)
- Total harmonic distortion (THD): ≤ 0.03% (AUX, TUNER, TAPE at 1 kHz, 1 V)
- RIAA equalization accuracy (Phono): ±0.5 dB

Input Sensitivity & Impedance
- Phono MM: 2.5 mV / 47 kΩ (max input 100 mV)
- Phono MC: 0.18 mV (HiFi Engine) or 0.1 mV / 10 Ω (HiFi‑Wiki) — depending on region
- Line inputs (AUX, TUNER, TAPE PLAY): 150 mV / 47 kΩ
- Microphone input: 7 mV (HiFi Engine)

Output Levels
- Line output: 150 mV / 47 kΩ
- Pre‑out: 1.0 V / 47 kΩ
- Tape REC: 150 mV / 47 kΩ

Noise & S/N Ratio
- Phono MC: 60 dB (HiFi Engine) or 62 dB (HiFi‑Wiki)
- Phono MM: 80 dB
- Line inputs: 90 dB

Tone & Filter Controls
- Bass: ±10 dB at 50 Hz
- Treble: ±10 dB at 10 kHz
- Low filter: 30 Hz, 6 dB/octave
- High filter: 7 kHz, 6 dB/octave

Power & Build
- Power supply: AC 220–240 V
- Dimensions: 430 × 74 × 247 mm
- Weight: 3.1 kg
- Finish: Silver aluminum front plate

Background & Position in Sansui Lineup
The C‑77 was part of Sansui’s early‑80s “slimline” separates, typically paired with the B‑77 power amplifier. It offered both MM and MC phono stages, making it suitable for high‑quality vinyl playback even by modern standards.

Sansui RG-7 is a 10 band graphic equalizer made in Japan, between 1981-1983

Core Audio Specifications
- Frequency response: 20 Hz – 20 kHz (±0 / –0.5 dB)
- Total harmonic distortion: 0.05% (20 Hz–20 kHz, 1 V output)
- Signal‑to‑noise ratio: 70 dB (A‑weighted, short‑circuit)
- Channel separation: 60 dB at 1 kHz

Equalizer Section
- 10 frequency bands: 30, 60, 125, 250, 500, 1k, 2k, 4k, 8k, 16 kHz
- Control range: ±12 dB per band
- Semiconductors: 19 ICs, 10 transistors, 6 diodes, 4 zener diodes

Inputs & Sensitivities
- Source / Tape Play: 150 mV / 47 kΩ (max input 5 V)
- Microphone: 0.8 mV / 10 kΩ (max 25 mV)
- Guitar: 9 mV / 100 kΩ

Outputs
- Tape Rec: 150 mV
- Pre‑amp output: 150 mV

Special Features
- Electronic reverb using BBD (Bucket Brigade Device) delay circuit — more natural than spring reverb units
- Pan‑pot function for moving the stereo image freely (useful with microphones)
- Two microphone inputs with mixing capability
- Guitar input with selectable routing
- Front‑panel effect assignment (line and/or mic)

Power & Build
- Power consumption: 16 W
- Voltage: 220–240 V
- Dimensions: 430 × 87 × 228 mm
- Weight: 3.3 kg (net)
- Finish: Silver aluminum front plate

Position in Sansui’s Lineup
The RG‑7 was part of Sansui’s early‑80s “sound consolette” series, combining EQ, reverb, mic mixing, and guitar input in one unit—aimed at home musicians, karaoke setups, and users wanting creative sound shaping beyond standard equalization.

Shipment: total weight approx. 19 kg.
Shipment will be packed with care and extra protection for transportation.

競投已結束
Matthew McIvor
專家
估價  € 550 - € 650

類似物品

中的精彩好物

音訊設備

設置搜索提醒
設置搜索提醒,以便在有新匹配可用時收到通知。

該物品在

                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    

如何在Catawiki上購買

了解更多有關買家保護

      1. 發現獨特物品

      瀏覽專家挑選的數千件獨特物品。查看每件獨特物品的照片、詳情和估價。 

      2. 出價最高

      找到您喜歡的物品並作出最高的出價。您可以跟隨拍賣進行到底,也可以讓我們的系統為您出價。您所要做的就是為您要支付的最高金額設置出價。 

      3. 作出安全可靠的付款

      為您的獨特物品付款,我們將在您的物品安全無恙抵達前,確保您的付款安全。我們使用受信任的支付系統來處理所有交易。 

有類近的物品可以出售?

無論您是網上拍賣的新手還是專業銷售人員,我們都可以幫助您為您的獨特物品賺取更多收益。

出售您的物品