UFOGRAPHY MAPSE STING Close Up 150mm MACRO 4x Sony E Mount 微距鏡頭





Catawiki買家保障
在您收到物品前,我們會妥善保管您的付款。查看詳情
Trustpilot評分 4.4 | 139520 則評論
在Trustpilot獲得極佳評等。
UFOGRAPHY MAPSE STING Close Up 150mm MACRO 4x 適用於 Sony E Mount 無反相機,意大利製造,物理狀況優良,功能狀況已測試並運作正常.
賣家描述
MAPSA STING
近距拍摄 150mm 宏镜 4x 索尼 E 卡口无反
产自意大利
适用于 macro 摄影的套件,兼容所有 Sony E 卡口无反相机。
传统探针式技术,以经济的方式靠近微距摄影。
对焦通过靠近被摄体来实现,手动曝光 M,调整快门时间和 ISO。
完整套件含铝制的 RMS 显微镜物镜,放大倍率为 4x,带后盖。
在现场表现良好,对焦距离仅为被摄体几毫米。
极好的放大倍率,适合业余和实验性用途。
手持拍摄困难,只有几毫米就会改变被摄体的对焦。
最佳效果需使用三脚架和合适的宏观照明。
可拆卸的套件采用 3D PLA 打印。
与机身的配合良好,具备经典的卡扣点击感。
索尼 E 卡口。
Macro photography kit, compatible with Mirrorless Sony E Mount.
Traditional probe technique for an economical approach to macro photography.
The focus is getting closer to the subject, manual exposure M, adjusting time and ISO.
Complete kit with metal microscope eyepiece with 4x factor and rear cap.
In the field it performs well, the focus takes place a few mm from the subject.
Excellent magnification factor, suitable for amateur and experimental use.
Difficult to photograph handheld, a few millimeters change the focus of the subject.
best results are obtained with a tripod and suitable macro lighting.
The demountable kit is printed in 3D PLA.
Good coupling with the camera body, with the classic coupling click.
Sony E Mount.
MAPSA STING
近距拍摄 150mm 宏镜 4x 索尼 E 卡口无反
产自意大利
适用于 macro 摄影的套件,兼容所有 Sony E 卡口无反相机。
传统探针式技术,以经济的方式靠近微距摄影。
对焦通过靠近被摄体来实现,手动曝光 M,调整快门时间和 ISO。
完整套件含铝制的 RMS 显微镜物镜,放大倍率为 4x,带后盖。
在现场表现良好,对焦距离仅为被摄体几毫米。
极好的放大倍率,适合业余和实验性用途。
手持拍摄困难,只有几毫米就会改变被摄体的对焦。
最佳效果需使用三脚架和合适的宏观照明。
可拆卸的套件采用 3D PLA 打印。
与机身的配合良好,具备经典的卡扣点击感。
索尼 E 卡口。
Macro photography kit, compatible with Mirrorless Sony E Mount.
Traditional probe technique for an economical approach to macro photography.
The focus is getting closer to the subject, manual exposure M, adjusting time and ISO.
Complete kit with metal microscope eyepiece with 4x factor and rear cap.
In the field it performs well, the focus takes place a few mm from the subject.
Excellent magnification factor, suitable for amateur and experimental use.
Difficult to photograph handheld, a few millimeters change the focus of the subject.
best results are obtained with a tripod and suitable macro lighting.
The demountable kit is printed in 3D PLA.
Good coupling with the camera body, with the classic coupling click.
Sony E Mount.

