編號 108154508

已出售
Roland - 效果踏板 - 日本 - 1973  (沒有保留價)
最終出價
€ 39
沒有保留價
一週前

Roland - 效果踏板 - 日本 - 1973 (沒有保留價)

**Important Shipping Notice** Please note that this item will be shipped internationally from Japan. Due to the size and weight of this vintage wah pedal and the protective packaging required, international shipping costs may be relatively high. In addition, depending on the destination country, import duties, VAT, customs clearance fees, and other import-related charges may also be substantial. We kindly ask all bidders to carefully review the shipping costs and potential import-related charges before placing a bid. --- # Roland WAH BEAT AW-10 – Early Made in Japan Vintage Wah Pedal – Estimated 1973 – Original Components – Serviced & Tested **Specifications** Brand / Model: Roland WAH BEAT AW-10 Type: Vintage wah effects pedal Estimated production year: 1973 Estimated production period: Summer to autumn 1973 Made in: Japan Production era: Early 1970s Input: Left side Output: Right side Electronic components: Appear to be original Component replacement: None performed Original stopper rubber: Present Weight: Approximately 1,310 g Included: Pedal only **Overview & Cosmetic Condition** This Roland WAH BEAT AW-10 is an early Japanese-made vintage wah pedal from Roland's early effects production era. Based on the markings found on its internal electronic components, this particular unit is estimated to have been manufactured in 1973, most likely sometime between summer and autumn of that year. The dating estimate is supported by several internal component markings, including a Tokyo Cosmos potentiometer marked "1973-4," a C828 transistor marked "3C," and two electrolytic capacitors marked "3F32." These markings are consistent with components that may have been manufactured during the first half of 1973. The combination of these component markings provides useful supporting evidence for the estimated production period. This pedal has been carefully cleaned, inspected, and operationally tested while preserving its existing electronic components. All electronic components appear to remain original, and no electronic component replacement or modification work was performed during servicing. The exterior shows scratches, marks, dirt, and other signs of age and use consistent with vintage equipment of this period. Although the pedal has been cleaned, its exterior has not been cosmetically restored to a factory-new appearance. The original stopper rubber underneath the moving pedal section also remains installed. Please examine the photographs carefully for details of its cosmetic condition. **Early Production Characteristics & Mechanical Features** This AW-10 has several noteworthy characteristics associated with early Japanese wah pedals. **1. Input and output configuration** The input and output jacks are arranged as follows: Input: Left side Output: Right side This configuration is one of the useful identifying details when examining early Roland AW-10 examples. Combined with the internal component markings, this arrangement provides additional information for collectors studying early production variations. However, the exact production period associated with this configuration has not been independently established. **2. Original stopper rubber** The pedal retains the stopper rubber located underneath the moving pedal section. This rubber component appears to be original. Rubber parts can deteriorate, harden, or become detached over time, and surviving examples of vintage pedals may have missing or replaced stopper components. The presence of this apparently original rubber part is therefore a noteworthy preservation detail. Its condition should be assessed with consideration for the age of the instrument. **3. Short pedal travel** One notable mechanical characteristic of the AW-10 is its relatively short pedal travel. Compared with many modern wah pedals, the range of movement is considerably shorter. This characteristic should be taken into consideration when operating the pedal. The shorter movement should not automatically be interpreted as a mechanical defect. The pedal has been operationally tested in its present condition. **Maintenance & Operational Condition** The pedal has been carefully cleaned, inspected, and tested. Oxidation was found on the INPUT and OUTPUT jack contacts. Both jack contacts were carefully polished using compound to remove oxidation and improve their electrical contact surfaces. The pedal was subsequently tested, and no noticeable scratchy contact noise or operational problems were found during the functional check. No electronic components were replaced during servicing. No electronic circuit modifications were performed. The existing electronic components were retained. The original stopper rubber underneath the pedal mechanism also remains installed. Maintenance consisted primarily of: * Overall cleaning * Inspection of the internal and external condition * Polishing of the oxidized input and output jack contacts * Functional and operational testing The objective of this work was to improve the condition of the electrical contacts while preserving the original electronic components and characteristics of this vintage pedal. **Estimated Production Period** Estimated production year: 1973 Estimated production period: Summer to autumn 1973 The estimated manufacturing period is based on several internal electronic component markings rather than a single date code. The most important documented markings are: Tokyo Cosmos potentiometer: RV30YN / 40R / 100kΩ / 1973-4 Transistor: C828 (R) / 3C Electrolytic capacitors: 16V 10µF / 3F32 × 2 The marking "1973-4" on the Tokyo Cosmos potentiometer is consistent with April 1973 production. The transistor marking "3C" may correspond to March 1973. The "3F" portion of the electrolytic capacitor markings may correspond to June 1973. If these interpretations are correct, the components were manufactured during the first half of 1973. Because a complete pedal must be assembled after its constituent components have been manufactured, the latest identifiable component markings suggest that final assembly most likely occurred after approximately June 1973. Allowing for the time between component production, inventory storage, and final assembly, an estimated production period of summer to autumn 1973 is considered reasonable. However, the exact manufacturer-specific date-code systems have not been conclusively verified. Therefore, these interpretations should be regarded as supporting evidence rather than definitive proof of the pedal's manufacturing date. **Production Dating Evidence & Component Markings** The following internal electronic components and markings were documented during inspection. **1. Tokyo Cosmos Potentiometer** Manufacturer: Tokyo Cosmos Markings: RV30YN 40R 100kΩ 1973-4 The "1973-4" marking is consistent with April 1973 production. If this interpretation is correct, the potentiometer would have been manufactured around April 1973. This provides an important chronological reference because the complete pedal could not have been assembled before the manufacture of its installed components. However, the exact interpretation of the marking has not been independently confirmed by manufacturer documentation. **2. C828 Transistor** Markings: C828 (R) 3C The "3C" marking is consistent with a possible 1973 manufacturing date code. Under this interpretation: "3" may indicate 1973. "C" may indicate March. If correct, the transistor would have been manufactured around March 1973. This interpretation is consistent with the April 1973 marking found on the Tokyo Cosmos potentiometer. However, the precise date-code interpretation remains unverified. **3. Additional Transistor** The following markings were documented on another transistor: GR T:1 C1000 The exact order of these markings was slightly difficult to read during inspection. For this reason, the markings are provided as reference information only. No definitive manufacturing date has been assigned to this component. **4. Electrolytic Capacitors** Two electrolytic capacitors have the same markings: 16V 10µF 3F32 Quantity: 2 The matching markings suggest that both capacitors may have originated from the same or a closely related production period. The "3F" portion is consistent with a possible June 1973 manufacturing code. If this interpretation is correct, these capacitors would have been manufactured around June 1973. Because the complete pedal could not have been assembled before these components were produced, this would suggest final assembly after approximately June 1973. However, the manufacturer's exact marking system has not been conclusively verified. These markings are therefore used only as supporting evidence for the estimated production period. **5. Footswitch** Manufacturer: Miyama Markings: Miyama #4 125V-10A 250V-6A PATENT These markings were documented on the internal footswitch. The voltage and current figures are markings on the switch component itself and should not be interpreted as the operating voltage or power requirements of the complete pedal. The footswitch has been retained as found. **Overall Production Dating Assessment** The internal component markings provide a reasonably consistent chronological relationship. The Tokyo Cosmos potentiometer marking suggests approximately April 1973. The C828 transistor marking may indicate March 1973. The electrolytic capacitor markings may indicate June 1973. These interpretations do not present an obvious chronological contradiction. Taken together, they support the possibility that the pedal was assembled after approximately June 1973. An estimated production period of summer to autumn 1973 is therefore considered reasonable. Nevertheless, the exact manufacturing date cannot be definitively established from these component markings alone. The estimated production period should be understood as an informed interpretation of the available component evidence rather than a confirmed factory manufacturing date. **Originality & Preservation** All electronic components appear to remain original. No visible evidence of electronic component replacement was identified during inspection. No electronic components were replaced during our servicing. The existing potentiometer, transistors, capacitors, footswitch, and other electronic components were retained. The stopper rubber underneath the moving pedal section also remains installed and appears to be original. The original electronic circuit has been preserved without modification during our servicing. However, the complete ownership, maintenance, and repair history before our acquisition is unknown. Therefore, the absolute originality of every component cannot be guaranteed. The servicing approach was chosen to preserve as much of the original early-production Roland AW-10 hardware and circuitry as reasonably possible. **About the Roland WAH BEAT AW-10** The Roland WAH BEAT AW-10 is a vintage Japanese wah pedal from Roland's early effects production era. This particular example retains its existing electronic components and several documented internal markings that provide useful information about its estimated manufacturing period. Its relatively short pedal travel is another characteristic that distinguishes its mechanical operation from many modern wah pedals. For collectors and musicians interested in early Japanese effects pedals, this AW-10 represents an interesting surviving example of Roland's vintage effects equipment. The combination of its estimated 1973 production period, documented electronic components, preserved mechanical parts, and carefully performed maintenance makes it particularly noteworthy. **Included** Roland WAH BEAT AW-10 pedal only. No accessories are included. **Important Notice Regarding Vintage Equipment** This is a vintage electronic effects pedal manufactured approximately 53 years ago, based on the estimated 1973 production period. The described condition, servicing information, and operational test results reflect its state at the time of inspection. Due to the age of the equipment, future electronic component deterioration, mechanical wear, or changes in performance cannot be completely ruled out. The original rubber components may also continue to deteriorate with age. Please review all photographs and the description carefully before placing a bid. **Shipping & Import Charges** The item will be carefully packed and shipped from Japan using eLogi, an international shipping service that officially supports integration with Catawiki. The shipping carrier will be selected according to the destination, shipping conditions, service availability, cost, and other relevant circumstances. Depending on the destination and conditions at the time of shipment, FedEx, DHL, UPS, or another carrier available through eLogi may be used. The final shipping carrier will be selected by the seller based on the most appropriate available shipping option for the destination. Shipping is available only to countries and regions where an appropriate shipping service is available through eLogi and where the item can legally be accepted for import. If no suitable shipping service is available for the buyer’s country, region, or address, or if applicable shipping or import requirements cannot be met, the order may be cancelled in accordance with Catawiki’s applicable policies and procedures. Shipping costs are to be paid by the buyer. Unless otherwise required by the selected carrier, destination country, or applicable Catawiki procedures, shipments will generally be sent under DDU/DAP terms. Under DDU/DAP terms, import duties, customs clearance fees, carrier clearance or handling fees, taxes, and other import-related charges that are not already collected by Catawiki at the time of purchase are the responsibility of the buyer. The seller does not cover import duties, taxes, customs fees, or other charges imposed by the destination country or carrier unless otherwise required under Catawiki’s applicable policies or the shipping service used. Please note that customs regulations, import restrictions, tax requirements, and clearance procedures vary depending on the destination country. Some items may be restricted or subject to specific import conditions in certain countries. Before placing a bid, buyers are responsible for confirming that the item can be legally imported into their country and that an appropriate shipping service is available to their destination. **Important Notice for Buyers in the European Union** For eligible EU orders, Catawiki may collect import VAT from the buyer at checkout under the IOSS system or other applicable VAT arrangements. Where import VAT has already been collected by Catawiki and the shipment qualifies for the applicable IOSS procedure, the same import VAT should not normally be charged again upon delivery, provided that the shipment is processed correctly under the applicable customs procedure. The appropriate Catawiki-provided IOSS information will be used for eligible shipments where required. Please note that the use of the IOSS procedure for VAT does not necessarily mean that the shipment is sent under DDP terms. Eligible shipments may still be sent under DDU/DAP terms. Therefore, even where VAT has already been collected by Catawiki, import duties, customs handling charges, carrier clearance fees, administrative fees, or other import-related charges may still apply depending on the destination country and the circumstances of the shipment. These charges are separate from VAT already collected by Catawiki and, where applicable, are the responsibility of the buyer. EU customs, VAT, IOSS, and low-value import procedures may change over time, and their practical implementation may vary depending on the destination country, customs authority, carrier, and individual shipment. As a result, EU deliveries may occasionally require additional customs procedures, documentation, charges, or processing time. We apologize in advance for any inconvenience this may cause and appreciate your understanding regarding the evolving EU import and customs environment. **Refused, Unclaimed, Undeliverable, Returned Shipments and Reshipping** If a shipment is refused, unclaimed, undeliverable, returned to the seller, or cannot be completed due to circumstances attributable to the buyer—such as refusal of delivery, failure to pay applicable import duties, taxes, customs or carrier charges, failure to complete customs procedures, failure to respond to the carrier or customs authorities, failure to collect the shipment, or an incorrect or incomplete delivery address provided by the buyer—the matter will be handled in accordance with Catawiki’s applicable policies and procedures. Any issues relating to refused delivery, non-delivery, undeliverable shipments, customs clearance failure, returns, reshipping, additional shipping costs, return-related charges, refunds, or cancellation will be handled in accordance with Catawiki’s applicable policies and, where necessary, through Catawiki Support. The seller will not independently determine or process refunds, cancellations, reshipping arrangements, or other resolutions outside the procedures required by Catawiki. Where reshipping is permitted under Catawiki’s applicable policies and procedures, the item may be reshipped at the buyer’s expense if the return or delivery failure was not caused by an error or omission on the seller’s side. Reshipping will only be carried out after the returned item has been received and inspected by the seller and after any required arrangements and payments have been confirmed through the appropriate Catawiki process. If the refusal, non-delivery, return, or delivery failure was caused by an error or omission on the seller’s side, the matter will likewise be handled in accordance with Catawiki’s applicable policies and procedures. By placing a bid, the buyer agrees to check and comply with all applicable import regulations, customs requirements, taxes, duties, and fees in their country. The seller cannot be held responsible for customs delays, import refusals, additional charges, or delivery problems resulting from local regulations or circumstances beyond the seller’s reasonable control, subject to Catawiki’s applicable policies and applicable law. Orders may be cancelled if an appropriate shipping service is unavailable or if shipping or import conditions cannot be met, subject to Catawiki’s applicable policies and procedures. We do not ship to P.O. BOX, APO, or FPO addresses.

編號 108154508

已出售
Roland - 效果踏板 - 日本 - 1973  (沒有保留價)

Roland - 效果踏板 - 日本 - 1973 (沒有保留價)

**Important Shipping Notice**

Please note that this item will be shipped internationally from Japan.

Due to the size and weight of this vintage wah pedal and the protective packaging required, international shipping costs may be relatively high.

In addition, depending on the destination country, import duties, VAT, customs clearance fees, and other import-related charges may also be substantial.

We kindly ask all bidders to carefully review the shipping costs and potential import-related charges before placing a bid.

---

# Roland WAH BEAT AW-10 – Early Made in Japan Vintage Wah Pedal – Estimated 1973 – Original Components – Serviced & Tested

**Specifications**

Brand / Model: Roland WAH BEAT AW-10

Type: Vintage wah effects pedal

Estimated production year: 1973

Estimated production period: Summer to autumn 1973

Made in: Japan

Production era: Early 1970s

Input: Left side

Output: Right side

Electronic components: Appear to be original

Component replacement: None performed

Original stopper rubber: Present

Weight: Approximately 1,310 g

Included: Pedal only

**Overview & Cosmetic Condition**

This Roland WAH BEAT AW-10 is an early Japanese-made vintage wah pedal from Roland's early effects production era.

Based on the markings found on its internal electronic components, this particular unit is estimated to have been manufactured in 1973, most likely sometime between summer and autumn of that year.

The dating estimate is supported by several internal component markings, including a Tokyo Cosmos potentiometer marked "1973-4," a C828 transistor marked "3C," and two electrolytic capacitors marked "3F32."

These markings are consistent with components that may have been manufactured during the first half of 1973.

The combination of these component markings provides useful supporting evidence for the estimated production period.

This pedal has been carefully cleaned, inspected, and operationally tested while preserving its existing electronic components.

All electronic components appear to remain original, and no electronic component replacement or modification work was performed during servicing.

The exterior shows scratches, marks, dirt, and other signs of age and use consistent with vintage equipment of this period.

Although the pedal has been cleaned, its exterior has not been cosmetically restored to a factory-new appearance.

The original stopper rubber underneath the moving pedal section also remains installed.

Please examine the photographs carefully for details of its cosmetic condition.

**Early Production Characteristics & Mechanical Features**

This AW-10 has several noteworthy characteristics associated with early Japanese wah pedals.

**1. Input and output configuration**

The input and output jacks are arranged as follows:

Input: Left side

Output: Right side

This configuration is one of the useful identifying details when examining early Roland AW-10 examples.

Combined with the internal component markings, this arrangement provides additional information for collectors studying early production variations.

However, the exact production period associated with this configuration has not been independently established.

**2. Original stopper rubber**

The pedal retains the stopper rubber located underneath the moving pedal section.

This rubber component appears to be original.

Rubber parts can deteriorate, harden, or become detached over time, and surviving examples of vintage pedals may have missing or replaced stopper components.

The presence of this apparently original rubber part is therefore a noteworthy preservation detail.

Its condition should be assessed with consideration for the age of the instrument.

**3. Short pedal travel**

One notable mechanical characteristic of the AW-10 is its relatively short pedal travel.

Compared with many modern wah pedals, the range of movement is considerably shorter.

This characteristic should be taken into consideration when operating the pedal.

The shorter movement should not automatically be interpreted as a mechanical defect.

The pedal has been operationally tested in its present condition.

**Maintenance & Operational Condition**

The pedal has been carefully cleaned, inspected, and tested.

Oxidation was found on the INPUT and OUTPUT jack contacts.

Both jack contacts were carefully polished using compound to remove oxidation and improve their electrical contact surfaces.

The pedal was subsequently tested, and no noticeable scratchy contact noise or operational problems were found during the functional check.

No electronic components were replaced during servicing.

No electronic circuit modifications were performed.

The existing electronic components were retained.

The original stopper rubber underneath the pedal mechanism also remains installed.

Maintenance consisted primarily of:

* Overall cleaning
* Inspection of the internal and external condition
* Polishing of the oxidized input and output jack contacts
* Functional and operational testing

The objective of this work was to improve the condition of the electrical contacts while preserving the original electronic components and characteristics of this vintage pedal.

**Estimated Production Period**

Estimated production year: 1973

Estimated production period: Summer to autumn 1973

The estimated manufacturing period is based on several internal electronic component markings rather than a single date code.

The most important documented markings are:

Tokyo Cosmos potentiometer:

RV30YN / 40R / 100kΩ / 1973-4

Transistor:

C828 (R) / 3C

Electrolytic capacitors:

16V 10µF / 3F32 × 2

The marking "1973-4" on the Tokyo Cosmos potentiometer is consistent with April 1973 production.

The transistor marking "3C" may correspond to March 1973.

The "3F" portion of the electrolytic capacitor markings may correspond to June 1973.

If these interpretations are correct, the components were manufactured during the first half of 1973.

Because a complete pedal must be assembled after its constituent components have been manufactured, the latest identifiable component markings suggest that final assembly most likely occurred after approximately June 1973.

Allowing for the time between component production, inventory storage, and final assembly, an estimated production period of summer to autumn 1973 is considered reasonable.

However, the exact manufacturer-specific date-code systems have not been conclusively verified.

Therefore, these interpretations should be regarded as supporting evidence rather than definitive proof of the pedal's manufacturing date.

**Production Dating Evidence & Component Markings**

The following internal electronic components and markings were documented during inspection.

**1. Tokyo Cosmos Potentiometer**

Manufacturer: Tokyo Cosmos

Markings:

RV30YN

40R

100kΩ

1973-4

The "1973-4" marking is consistent with April 1973 production.

If this interpretation is correct, the potentiometer would have been manufactured around April 1973.

This provides an important chronological reference because the complete pedal could not have been assembled before the manufacture of its installed components.

However, the exact interpretation of the marking has not been independently confirmed by manufacturer documentation.

**2. C828 Transistor**

Markings:

C828 (R)

3C

The "3C" marking is consistent with a possible 1973 manufacturing date code.

Under this interpretation:

"3" may indicate 1973.

"C" may indicate March.

If correct, the transistor would have been manufactured around March 1973.

This interpretation is consistent with the April 1973 marking found on the Tokyo Cosmos potentiometer.

However, the precise date-code interpretation remains unverified.

**3. Additional Transistor**

The following markings were documented on another transistor:

GR

T:1

C1000

The exact order of these markings was slightly difficult to read during inspection.

For this reason, the markings are provided as reference information only.

No definitive manufacturing date has been assigned to this component.

**4. Electrolytic Capacitors**

Two electrolytic capacitors have the same markings:

16V 10µF

3F32

Quantity: 2

The matching markings suggest that both capacitors may have originated from the same or a closely related production period.

The "3F" portion is consistent with a possible June 1973 manufacturing code.

If this interpretation is correct, these capacitors would have been manufactured around June 1973.

Because the complete pedal could not have been assembled before these components were produced, this would suggest final assembly after approximately June 1973.

However, the manufacturer's exact marking system has not been conclusively verified.

These markings are therefore used only as supporting evidence for the estimated production period.

**5. Footswitch**

Manufacturer: Miyama

Markings:

Miyama #4

125V-10A

250V-6A

PATENT

These markings were documented on the internal footswitch.

The voltage and current figures are markings on the switch component itself and should not be interpreted as the operating voltage or power requirements of the complete pedal.

The footswitch has been retained as found.

**Overall Production Dating Assessment**

The internal component markings provide a reasonably consistent chronological relationship.

The Tokyo Cosmos potentiometer marking suggests approximately April 1973.

The C828 transistor marking may indicate March 1973.

The electrolytic capacitor markings may indicate June 1973.

These interpretations do not present an obvious chronological contradiction.

Taken together, they support the possibility that the pedal was assembled after approximately June 1973.

An estimated production period of summer to autumn 1973 is therefore considered reasonable.

Nevertheless, the exact manufacturing date cannot be definitively established from these component markings alone.

The estimated production period should be understood as an informed interpretation of the available component evidence rather than a confirmed factory manufacturing date.

**Originality & Preservation**

All electronic components appear to remain original.

No visible evidence of electronic component replacement was identified during inspection.

No electronic components were replaced during our servicing.

The existing potentiometer, transistors, capacitors, footswitch, and other electronic components were retained.

The stopper rubber underneath the moving pedal section also remains installed and appears to be original.

The original electronic circuit has been preserved without modification during our servicing.

However, the complete ownership, maintenance, and repair history before our acquisition is unknown.

Therefore, the absolute originality of every component cannot be guaranteed.

The servicing approach was chosen to preserve as much of the original early-production Roland AW-10 hardware and circuitry as reasonably possible.

**About the Roland WAH BEAT AW-10**

The Roland WAH BEAT AW-10 is a vintage Japanese wah pedal from Roland's early effects production era.

This particular example retains its existing electronic components and several documented internal markings that provide useful information about its estimated manufacturing period.

Its relatively short pedal travel is another characteristic that distinguishes its mechanical operation from many modern wah pedals.

For collectors and musicians interested in early Japanese effects pedals, this AW-10 represents an interesting surviving example of Roland's vintage effects equipment.

The combination of its estimated 1973 production period, documented electronic components, preserved mechanical parts, and carefully performed maintenance makes it particularly noteworthy.

**Included**

Roland WAH BEAT AW-10 pedal only.

No accessories are included.

**Important Notice Regarding Vintage Equipment**

This is a vintage electronic effects pedal manufactured approximately 53 years ago, based on the estimated 1973 production period.

The described condition, servicing information, and operational test results reflect its state at the time of inspection.

Due to the age of the equipment, future electronic component deterioration, mechanical wear, or changes in performance cannot be completely ruled out.

The original rubber components may also continue to deteriorate with age.

Please review all photographs and the description carefully before placing a bid.

**Shipping & Import Charges**

The item will be carefully packed and shipped from Japan using eLogi, an international shipping service that officially supports integration with Catawiki.

The shipping carrier will be selected according to the destination, shipping conditions, service availability, cost, and other relevant circumstances.

Depending on the destination and conditions at the time of shipment, FedEx, DHL, UPS, or another carrier available through eLogi may be used.

The final shipping carrier will be selected by the seller based on the most appropriate available shipping option for the destination.

Shipping is available only to countries and regions where an appropriate shipping service is available through eLogi and where the item can legally be accepted for import.

If no suitable shipping service is available for the buyer’s country, region, or address, or if applicable shipping or import requirements cannot be met, the order may be cancelled in accordance with Catawiki’s applicable policies and procedures.

Shipping costs are to be paid by the buyer.

Unless otherwise required by the selected carrier, destination country, or applicable Catawiki procedures, shipments will generally be sent under DDU/DAP terms.

Under DDU/DAP terms, import duties, customs clearance fees, carrier clearance or handling fees, taxes, and other import-related charges that are not already collected by Catawiki at the time of purchase are the responsibility of the buyer.

The seller does not cover import duties, taxes, customs fees, or other charges imposed by the destination country or carrier unless otherwise required under Catawiki’s applicable policies or the shipping service used.

Please note that customs regulations, import restrictions, tax requirements, and clearance procedures vary depending on the destination country.

Some items may be restricted or subject to specific import conditions in certain countries.

Before placing a bid, buyers are responsible for confirming that the item can be legally imported into their country and that an appropriate shipping service is available to their destination.

**Important Notice for Buyers in the European Union**

For eligible EU orders, Catawiki may collect import VAT from the buyer at checkout under the IOSS system or other applicable VAT arrangements.

Where import VAT has already been collected by Catawiki and the shipment qualifies for the applicable IOSS procedure, the same import VAT should not normally be charged again upon delivery, provided that the shipment is processed correctly under the applicable customs procedure.

The appropriate Catawiki-provided IOSS information will be used for eligible shipments where required.

Please note that the use of the IOSS procedure for VAT does not necessarily mean that the shipment is sent under DDP terms. Eligible shipments may still be sent under DDU/DAP terms.

Therefore, even where VAT has already been collected by Catawiki, import duties, customs handling charges, carrier clearance fees, administrative fees, or other import-related charges may still apply depending on the destination country and the circumstances of the shipment.

These charges are separate from VAT already collected by Catawiki and, where applicable, are the responsibility of the buyer.

EU customs, VAT, IOSS, and low-value import procedures may change over time, and their practical implementation may vary depending on the destination country, customs authority, carrier, and individual shipment.

As a result, EU deliveries may occasionally require additional customs procedures, documentation, charges, or processing time.

We apologize in advance for any inconvenience this may cause and appreciate your understanding regarding the evolving EU import and customs environment.

**Refused, Unclaimed, Undeliverable, Returned Shipments and Reshipping**

If a shipment is refused, unclaimed, undeliverable, returned to the seller, or cannot be completed due to circumstances attributable to the buyer—such as refusal of delivery, failure to pay applicable import duties, taxes, customs or carrier charges, failure to complete customs procedures, failure to respond to the carrier or customs authorities, failure to collect the shipment, or an incorrect or incomplete delivery address provided by the buyer—the matter will be handled in accordance with Catawiki’s applicable policies and procedures.

Any issues relating to refused delivery, non-delivery, undeliverable shipments, customs clearance failure, returns, reshipping, additional shipping costs, return-related charges, refunds, or cancellation will be handled in accordance with Catawiki’s applicable policies and, where necessary, through Catawiki Support.

The seller will not independently determine or process refunds, cancellations, reshipping arrangements, or other resolutions outside the procedures required by Catawiki.

Where reshipping is permitted under Catawiki’s applicable policies and procedures, the item may be reshipped at the buyer’s expense if the return or delivery failure was not caused by an error or omission on the seller’s side.

Reshipping will only be carried out after the returned item has been received and inspected by the seller and after any required arrangements and payments have been confirmed through the appropriate Catawiki process.

If the refusal, non-delivery, return, or delivery failure was caused by an error or omission on the seller’s side, the matter will likewise be handled in accordance with Catawiki’s applicable policies and procedures.

By placing a bid, the buyer agrees to check and comply with all applicable import regulations, customs requirements, taxes, duties, and fees in their country.

The seller cannot be held responsible for customs delays, import refusals, additional charges, or delivery problems resulting from local regulations or circumstances beyond the seller’s reasonable control, subject to Catawiki’s applicable policies and applicable law.

Orders may be cancelled if an appropriate shipping service is unavailable or if shipping or import conditions cannot be met, subject to Catawiki’s applicable policies and procedures.

We do not ship to P.O. BOX, APO, or FPO addresses.

最終出價
€ 39
沒有保留價
Metin Levi
專家
估價  € 150 - € 200

類似物品

  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​

中的精彩好物

樂器

  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
設置搜索提醒
設置搜索提醒,以便在有新匹配可用時收到通知。

該物品在

                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    

如何在Catawiki上購買

了解更多有關買家保護

      1. 發現獨特物品

      瀏覽專家挑選的數千件獨特物品。查看每件獨特物品的照片、詳情和估價。 

      2. 出價最高

      找到您喜歡的物品並作出最高的出價。您可以跟隨拍賣進行到底,也可以讓我們的系統為您出價。您所要做的就是為您要支付的最高金額設置出價。 

      3. 作出安全可靠的付款

      為您的獨特物品付款,我們將在您的物品安全無恙抵達前,確保您的付款安全。我們使用受信任的支付系統來處理所有交易。 

有類近的物品可以出售?

無論您是網上拍賣的新手還是專業銷售人員,我們都可以幫助您為您的獨特物品賺取更多收益。

出售您的物品