Ronson - 沒有保留價 - 打火機 - 復合材料

06
天
22
小時
09
分鐘
12
秒
開始競投
€ 1
沒有保留價
Sebastian Schulze
專家
由Sebastian Schulze精選

在復古鋼筆和拍賣諮詢方面擁有 20 多年的專業知識。

估價  € 150 - € 200
沒有出價記錄

Catawiki買家保障

在您收到物品前,我們會妥善保管您的付款。查看詳情

Trustpilot評分 4.4 | 144581 則評論

在Trustpilot獲得極佳評等。

賣家描述

Ronson Petrol Penciliter
Louis V Aronson - Art Metal Works inc, Newark, NJ, USA
First generation Ronson Penciliter by Art Metal Works, 1930s, Art Deco petrol lighter and propelling pencil, US, UK and Canadian patents

The Penciliter put a lighter and a propelling pencil in a single pocket piece. The clip works the lighter, and the cone twists to advance the lead. It was made in Newark, New Jersey by Art Metal Works, the firm behind the Ronson name, to patents taken out by its founder Louis V. Aronson.

This is a first generation example, produced from around 1934 until the outbreak of the war, when Ronson production turned to war work. The body carries the fine geometric engine turning of the Art Deco period, and the patent block near the top gives the United States, United Kingdom and Canadian numbers, which is the marking found on the early version rather than on the post-war one.

The patent dates of 1925 and 1926 refer to Aronson’s lighter mechanism, which Art Metal Works continued to mark for years after the grant. They establish the design and its protection rather than the year this example left the factory.

Condition is very good. The lighter sparks and has a wick though I have not fired it. The pencil advances cleanly or needs attention. The plating shows light wear consistent with pocket use, with brassing at the high points / clip. The patent imprint is clear and reproduced below.

It is sold unfuelled, since lighters must be posted empty. A fresh flint, a wick if needed and standard lighter fuel will return it to use.

Specification

Maker: Art Metal Works, Newark, New Jersey, makers of Ronson
Model: Penciliter, first generation
Period: circa 1934 to 1940
Patents: United States, United Kingdom and Canada, dated 1925 and 1926, marked at the top of the case
Design: Louis V. Aronson
Finish: plating, geometric engine turned body
Lead: usually 1.1mm rather than the later 0.9mm
Length: 15cm
Lighter: petrol, clip-operated
DES.Pat.92.996.
Canada Pat 288,148 -BR.pat.291,695- US pat RE.No19.023

Ronson Petrol Penciliter
Louis V Aronson - Art Metal Works inc, Newark, NJ, USA
First generation Ronson Penciliter by Art Metal Works, 1930s, Art Deco petrol lighter and propelling pencil, US, UK and Canadian patents

The Penciliter put a lighter and a propelling pencil in a single pocket piece. The clip works the lighter, and the cone twists to advance the lead. It was made in Newark, New Jersey by Art Metal Works, the firm behind the Ronson name, to patents taken out by its founder Louis V. Aronson.

This is a first generation example, produced from around 1934 until the outbreak of the war, when Ronson production turned to war work. The body carries the fine geometric engine turning of the Art Deco period, and the patent block near the top gives the United States, United Kingdom and Canadian numbers, which is the marking found on the early version rather than on the post-war one.

The patent dates of 1925 and 1926 refer to Aronson’s lighter mechanism, which Art Metal Works continued to mark for years after the grant. They establish the design and its protection rather than the year this example left the factory.

Condition is very good. The lighter sparks and has a wick though I have not fired it. The pencil advances cleanly or needs attention. The plating shows light wear consistent with pocket use, with brassing at the high points / clip. The patent imprint is clear and reproduced below.

It is sold unfuelled, since lighters must be posted empty. A fresh flint, a wick if needed and standard lighter fuel will return it to use.

Specification

Maker: Art Metal Works, Newark, New Jersey, makers of Ronson
Model: Penciliter, first generation
Period: circa 1934 to 1940
Patents: United States, United Kingdom and Canada, dated 1925 and 1926, marked at the top of the case
Design: Louis V. Aronson
Finish: plating, geometric engine turned body
Lead: usually 1.1mm rather than the later 0.9mm
Length: 15cm
Lighter: petrol, clip-operated
DES.Pat.92.996.
Canada Pat 288,148 -BR.pat.291,695- US pat RE.No19.023

詳細資料

時代
1900-2000
物品數量
1
製造商/品牌
Ronson
材質
復合材料
原產國
美國
狀態
良好 - 有使用痕跡、些微老化跡象和小瑕疵
能正常運作
是
長度
15 cm
時段
1930-1940
英國已驗證
私人

類似物品

  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​

中的精彩好物

鋼筆及打火機

  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​