Almost in mint condition! Smal tape deck, build like a tank. Sounds terrific. All New belts installed. Rubber rolls cleaned Heads cleaned and demagnetized Contacts cleaned All functions tested. Plays, winds, records, auto stop and counter. Speed is set correct. Carefully shipped Description The neat, eye-appealing front panel of the outstanding Pioneer CT-F2121 has much more than just good looks. All controls are situated in positions corresponding to the order and frequency of use so that it can be controlled just as you would a receiver, amplifier or tuner. With the built-in Dolby B automatic noise reduction system in the CT-F2121 you are assured that any cassette tape you use will deliver noise-free musical sound with a 10dB improvement in signal to noise ratio in the high frequency range. The deck is equipped with two independent switches which, when used properly, guarantee optimum results from virtually any kind of tape you use. Pioneer has selected a unique permalloy head material for use in the recording/playback head for ideal electromagnetic performance in all circumstances. Finally, a separate electronic servo-system with non-contact point detection mechanism and a solenoid in the CT-F2121 provides the sort of fully automatic stop operation you should always insist on in today's modern stereo cassette decks. Specifications Type: 2-head, single compact cassette deck Track System: 4-track, 2-channel stereo Tape Speed: 4.75 cm/s Heads: 1 x record/playback, 1 x erase Motor: electronically controlled DC Tape Type: type I, CrO2 Noise Reduction: B Frequency Response: 30Hz to 16kHz (Cr02 tape) Signal to Noise Ratio: 58dB (dolby B) Wow and Flutter: 0.12% Input: 63mV (line), 0.3mV (mic) Output: 0.45V (line) Semiconductors: 2 x FET, 41 x transistors, 29 x diodes Dimensions: 350 x 142 x 282mm Weight: 6.6kg Year: 1976 Carefully ensured shipped