Very cool looking fully working and very good sounding vintage Technics receiver. With phono input. Good FM stereo reception even with short antenna New lamp placed. Clean knobs and contacts. Type FM/AM Receiver Amplifier Unit Effective output (both channel drive) 15W + 15W (8 ohm, 40 hz to 20 khz) 2x 20 @ 4 Ohms RMS Output bandwidth 10 Hz ~ 40 kHz -3dB (8 Ω when both channels are driven) Total harmonic distortion factor 0.3% (40 Hz to 20 kHz at Rated Output) 0.03% (1 kHz at rated output of -3dB and 7.5W) Input Sensitivity / Impedance Phono : 2.5mV/47k Ω Aux, Playback : 150mV/33k Ω Mic : 4mV/10k Ω S/N ratio (IHF-A) Phono:78dB Frequency characteristic Phono : within ± 1.0 dB of RIAA standard curve Output Voltage / Impedance Mixing rec out : 1.8V/600 Ω Rec out:150mV Load impedance 8 Ω ~ 16 Ω FM Tuner Section Practical sensitivity 11.2 dBf (new IHF), (1.0 μ V, 75 Ω) Total harmonic distortion factor mono:0.2% stereo:0.4% Signal-to-noise ratio mono:70dB stereo:65dB Effective selectivity 60dB Stereo separation 40dB(1kHz) 30dB(10kHz) Practical sensitivity 30 μ V, 300 μ V/m Selectivity 30dB Pwer 100 VAC, 50Hz/60Hz Power consumption 37W External dimensions Width 430x Height 128x Depth 280 mm Carefully insured shipped!