Sansui - SP-200 Kaiutinsarja





Catawikin ostaja turva
Maksusi pidetään turvassa, kunnes saat esineesi. Näytä tiedot
Trustpilot 4.4 | 136024 arvostelua
Arvosteltu erinomaiseksi Trustpilot.
Sansui SP-200 yksittäinen vintage-kaiutin, erittäin hyvässä kunnossa ja testattu toimivaksi, valmistettu Japanissa noin 1968–1973, mitat 38 × 65 × 32 cm, paino 44 kg, 8 Ω, 95 dB herkkyys, 45 W tehonkestävyys, 3-tie / 5-kaiutin, Bass-reflex kotelo.
Myyjän antama kuvaus
A Rare Fine! A pair of Vintage Sansui Speaker and very good condition!
The Sansui SP-200 is a classic, late-1960s made in Japan, loudspeaker system.
It features a prominent multi-driver layout housed in solid wood cabinetry, easily recognizable by its iconic Kumiko-style wooden lattice grilles.
Note: Thanks to their high 95 dB sensitivity, these speakers require very little power to sing. They are a phenomenal match for low-watt vintage tube amplifiers or early solid-state receivers from the same era.
Technical Specifications
The SP-200 is a 3-way, 5-driver passive loudspeaker system utilizing highly efficient AlNiCo magnets.
Specification
Enclosure Type Ported / Bass Reflex (Stand mount/Floor)
Frequency Response 35 Hz to 20,000 Hz
Power Handling 45 Watts (Continuous/Nominal)
Impedance 8 Ohms
Sensitivity 95 dB
Crossover Frequencies 1,500 Hz and 5,000 Hz
Bass Driver (Woofer) 1 x 12" cone
Midrange Driver 2 x 5" cones
Tweeter Driver 2 x 2" horn type
Dimensions (W x H x D) 38 x 65 x 32 cm
Weight (21 kg) per speaker
Production Era Circa 1968 – 1973
All drivers and tweeters with no damage, working perfectly. A must to have!! a Rare Fine!!
Please note the wooden cabinet have very small few marks. Pictures are part of the description.
Speaker grid is original made (wood). This is a 60 years old speakers working perfectly!
Note: the speakers were build during the Sansui Golder Era, with an exceptional rare high quality from that time and real experts and vintage fans can appreciate.
Shipping weight estimated: 42 kg approx. (2 boxes, 1 speaker cabinet per box, around 21 kg each box).
Will be packed with extra padding and protection for transportation.
A Rare Fine! A pair of Vintage Sansui Speaker and very good condition!
The Sansui SP-200 is a classic, late-1960s made in Japan, loudspeaker system.
It features a prominent multi-driver layout housed in solid wood cabinetry, easily recognizable by its iconic Kumiko-style wooden lattice grilles.
Note: Thanks to their high 95 dB sensitivity, these speakers require very little power to sing. They are a phenomenal match for low-watt vintage tube amplifiers or early solid-state receivers from the same era.
Technical Specifications
The SP-200 is a 3-way, 5-driver passive loudspeaker system utilizing highly efficient AlNiCo magnets.
Specification
Enclosure Type Ported / Bass Reflex (Stand mount/Floor)
Frequency Response 35 Hz to 20,000 Hz
Power Handling 45 Watts (Continuous/Nominal)
Impedance 8 Ohms
Sensitivity 95 dB
Crossover Frequencies 1,500 Hz and 5,000 Hz
Bass Driver (Woofer) 1 x 12" cone
Midrange Driver 2 x 5" cones
Tweeter Driver 2 x 2" horn type
Dimensions (W x H x D) 38 x 65 x 32 cm
Weight (21 kg) per speaker
Production Era Circa 1968 – 1973
All drivers and tweeters with no damage, working perfectly. A must to have!! a Rare Fine!!
Please note the wooden cabinet have very small few marks. Pictures are part of the description.
Speaker grid is original made (wood). This is a 60 years old speakers working perfectly!
Note: the speakers were build during the Sansui Golder Era, with an exceptional rare high quality from that time and real experts and vintage fans can appreciate.
Shipping weight estimated: 42 kg approx. (2 boxes, 1 speaker cabinet per box, around 21 kg each box).
Will be packed with extra padding and protection for transportation.

