Yamaha MT-07 that was professionally converted to a modern Scrambler by LMC. They work from a design and engineering point of view by creating a complete 3D scan of the motorcycle and designing it in CAD (see photos). For example, the aluminium tank, stainless steel exhaust and body panels have been designed in 3D. The aluminium tank is made from 2 mm laser-cut sheet. The stainless steel exhaust is made of 1 mm stainless steel and equipped with an after-market muffler. 3D printed moulds have been made for the Polyester body panels. All parts and block parts have been given new powder coating. The front fork has been replaced by a USD front fork from a DS1000 with larger brake discs and Brembo calipers for better handling and braking properties. The speedometer is linked to the GPS of your mobile phone. If you wish, we can replace it free of charge with a Motogadget Motoscope Mini. All body parts have been painted in Ral 9017, after which the motorcycle was provided with decals for ROEG Moto. ROEG has used the motorcycle for marketing purposes during 2022. The engine block was completely checked during the conversion, with new clutch plates, spark plugs, tires and major maintenance. The motorcycle has a Dutch registration, but it is unknown if it can be registered outside of the Netherlands. Please ensure you are aware of regulations in your country and whether or not this motorcycle is allowed on the road. Bidding on this lot is your own personal responsibility.