Kunst

Interiør og pyntegjenstander

Smykker og edelstener

Klokker, penner og lightere

Mote

Mynter og frimerker

Tegneserier og animasjon

Klassiske biler, motorsykler og automobilia

Vin, whisky og brennevin

Asiatisk kunst og stammekunst

Samlekort

Leker og modeller

Arkeologi og naturhistorie

Idrett

Musikk, filmer og kameraer

Bøker og historiske minner

Den oppslukende vitenskapen om lydutstyr, brakt til deg av {name}

Ariel Cabello

A Pioneer icon: PL-50 with a magnificent burl walnut plinth, a true gem! Spins and locks perfectly at both speeds. Armlift works flawlessly. Technically and optically in beautiful condition. Including the Pioneer JP-505 headshell and tone arm cable. Consider the element a gift since the technical condition can not be guaranteed. It concerns a Japanese import model. Vinyl not included. 


NO RESERVE PRICE. Enjoy the bidding!

Info:

There were 2 types, the PL-50 of the normal version and the PL-50L with the newly developed moving coil system silent lift-up function.

In order to pursue the limit of rotational accuracy, we have adopted an SH rotor type motor in which the rotor support point (bearing) located at the bottom of the motor is moved just below the turntable. By this, we have succeeded in almost matching the position of the center of gravity of the motor with that of the support point.
As a result, the reverse conical motion with the lowest part of the motor shaft as a fulcrum, which occurs due to the slight clearance between the motor shaft and bearing, which could not be prevented by the conventional structure in which the position of the center of gravity and the position of the fulcrum were greatly deviated, is eliminated, and excellent rotational characteristics are secured.
In addition, a quartz PLL DC servo Hall motor with a starting torque of 1.6kg-cm is used to eliminate load fluctuations caused by resistance received by the needle tip from the recording sound groove, and a 330kg-cm DC servo Hall motor is used to eliminate load fluctuations caused by resistance received by the needle tip from the recording sound groove.2A large turntable with a diameter of 31 cm has been adopted.
In the magnetic pole switching mechanism of the motor, three Hall elements developed by Pioneer are used, and other fine parts are finished with micron-order machining accuracy to eliminate minute noise.

A special anti-vibration agent has been applied to the back of the turntable to prevent noise that adversely affects sound quality.

In order to eliminate low-frequency resonance and achieve high sensitivity at the same time, a silicon oil braking tone arm (capable of on/off operation) is adopted.
This is a structure in which a damping fin (ring shape) is submerged in silicon oil injected into the oil cup at the upper part of the arm shaft, and damping is applied. Moreover, by cutting the tip of the fin at 45 degrees, it is designed to simultaneously apply appropriate braking in both horizontal and vertical directions.
As a result, the Q (resonance sharpness) of the low-frequency resonance is reduced, and the mechanical impedance of the tone arm is flattened. In addition, the cross-modulation distortion is greatly improved by the synergistic effect of the mass concentration method that brings the main weight of the arm closer to the rotation axis, and clear reproduction sound is realized in the entire audible band.

The arm base uses a heavy weight arm base made of die cast with a stabilizer effect, and the arm is firmly fixed to suppress partial resonance.

Long type arm with effective length of 250 mm is adopted.

A high-density cabinet with a combination of natural wood (Marble Ebony finish) and 4-layered solid board is adopted, which effectively prevents the cabinet from shaking due to the reaction of the rotational moment of the high torque motor.
The insulator is equipped with a newly developed low-center-of-gravity structure insulator that provides excellent stability against external vibrations such as howling.

By using a damping adjustment adapter sold separately, it becomes a braking level variable arm similar to PL-70, and the braking amount can be adjusted according to the compliance of the cartridge.
When mounting a cartridge with heavy weight (Orthophone SPU-GT type, etc.), it is recommended to use an exchange weight (sold separately).

The PL-50L is equipped with a silent lift-up mechanism that does not produce mechanical sounds.
This is a moving coil system that applies the operation principle of a speaker to the elevation mechanism that moves the arm up and down. It operates without contact with DC voltage.
In addition, the end position of the recording sound groove is detected by non-contact detection using a Hall element Hall element and a magnet inside the arm shaft is adopted, so that no side pressure is generated and sensitivity of the arm is not impaired.


Type Cartridgeless player system
Phono Motor Section
Motor Quartz PLL DC servo Hall motor
Drive system Direct drive
Bearing structure SH / rotor system
Turntable Diameter 31cm
Turntable inertia mass 330kg-cm2(including turntable seats)
Number of revolutions 33 1/3, 45 rpm
Rotational speed change Electronic with short stroke switch
Uneven rotation 0.012% or Less (PL-50L, WRMS/FG Direct Reading Method)
0.013% or Less (PL-50, WRMS/FG Direct Reading Method)
0.023% or Less (WRMS/JIS)
S/N 78 dB or more (DIN-B)
65 dB or More (JIS)
Load variation 0% (Needle Pressure 200g or Less)
Start-up characteristic 1/3 turn or less
Starting torque 1.6kg-cm
Speed detection method All-round integration method FG
Rotational speed deviation Not more than 0.002%
Drift Time drift : 0.00008% / h
Temperature drift : 0.00003% / ° C.
Brake mechanism Pure electronic
Tone Arm Section
Type Oil braking system static balance S-shaped pipe arm
Effective length 250mm
Overhang 14mm
Tracking error + 2.1 °, -1.2 °
Needle pressure adjustment Weight 1 Rotation 1g (0.1g scale)
Applicable Cartridge Dead Weight 4g ~ 13g (when using the attached shell)
Height adjustment range + / - 3 mm
Head shell Aluminum Impact Press Head Shell, Dead Weight 10.5g

Attachment mechanism Quartz lock indicator
Quick stop
Silent Lift Up (Electronic Type, PL-50L Only)
Semiconductors used Quartz : 1
IC:6
Hall element : 4 (3 for PL-50)
LED : 4 (3 for PL-50)
Transistor : 4
Diode : 4
Power 100 V
AC, 50Hz/60Hz
Power consumption PL-50:8W
PL-50L:13W

Weight 15kg

God - Antall enheter: 1 - Inkludert: Platespiller - No extra's

Pioneer - PL-50 Platespiller

Lydutstyr

Reservasjonspris

Ingen reservasjonspris

Kjøp nå

Budsjett

Sluttdato

søndag

i morgen

i dag

tirsdag

mandag

onsdag

lørdag

Sted

Nederland

Italia

Belgia

Tyskland

Frankrike

Japan

Spania

Romania

Danmark

Portugal

Polen

Østerrike

Hongkong

Ungarn

Storbritannia

Sveits

Kroatia

Hellas

Irland

Sverige

Merke

Bang & Olufsen

Sony

Bose

Philips

Pioneer

Marantz

Technics

Denon

Akai

Yamaha

Harman Kardon

Bower & Wilkins

Onkyo

Sansui

Grundig

Luxman

Revox

Kenwood

Dual

Klipsch

Panasonic

Objekt

Høyttaler sett

Hi-fi sett

CD-spiller

Platespiller

Faststoff stereomottaker

Faststoff integrert forsterker

Høyttaler

Faststoff flerkanalsmottaker

Lydkassettspiller

Radio

Rør-radio

Kassett opptaker-spiller

Lyd komponent

Stereo sett

Lydkassett

Subwoofer høyttalersett

Hodetelefon

Lydforsterker

Faststoff effektforsterker

Faststoff forsterker

Hjul til hjul-dekk 18 cm

Hjul til hjul-lyd

Walkman

Opprinnelsesland

Amerikas forente stater

Forskjellige land

Materiale

Aluminium

Metall

Tilstand

Utmerket

Veldig god

Perfekt

Ubrukt og forseglet (m&S)

Blandet kvalitet

Utmerket (EX)

God / dårlig

God og dårlig

Ubrukt (M)

Veldig bra pluss (VG +)

Som ny - ubrukt

Nesten ubrukt (NM)

Ekstra tilbehør

No extra's

Power cord

+ ekstra objekt (se beskrivelse)

Remote control

Boks

Original user manual

Power supply

Strømadapter

Refurbished

Eske

No cables

Brochures

Anti-pop filter

Støtmontering for mikrofon

Transportkasse

Periode

2020+

2024

sjanger

Klassisk

Testet og fungerer

Testet og fungerer/spillbar

Ikke testet

Æra

1900-2000

Etter 2000

1400-1900

Plateselskap

HMV (His Masters Voice

Unknown label

Trykker

Ukjent trykkeri

Designer

Japan & Related

Various Original Soundtracks

Franco Albini

Livio Castiglioni

Michael Young

God - Antall enheter: 1 - Inkludert: Faststoff flerkanalsforsterker - No extra's

Marantz - SR-4600 Faststoff flerkanalsforsterker

Pioneer - VSX-921 Faststoff flerkanalsforsterker

God - Antall enheter: 3 - Inkludert: Subwoofer høyttalersett - No extra's

Bose - Acoustimass 5 Series 2 - 2.1 Subwoofer høyttalersett

Utmerket - Antall enheter: 1 - Inkludert: Radio - No extra's

Marantz - ST-40 Radio

God - Antall enheter: 1 - Inkludert: Høyttaler - No extra's

Harman Kardon - HK 0S4 Høyttaler

Veldig god - Antall enheter: 2 - Inkludert: Lyd komponent - No extra's

Generic - NAB aluminium hjulnavadapter Lyd komponent

God - Antall enheter: 6 - Inkludert: Subwoofer høyttalersett - Remote control

Bose - CineMate® Series II - Digitalt hjemmekino-høyttalersystem - 2.1 Subwoofer høyttalersett

God - Antall enheter: 1 - Inkludert: No extra's

Sansui - FR-D3 Platespiller

Utmerket - Antall enheter: 1 - Inkludert: Power cord

Grundig - TK-6 Bærbar båndopptaker

Polen -   - 2024

Marantz /Audiomanufactura - Audio manufactura - Lydstativ - aluminium , venner ,tre, leder - Platform Antivibration

God - Antall enheter: 1 - Inkludert: Faststoff stereomottaker - No extra's

Onkyo - TX-8255 - med phono-inngang Faststoff stereomottaker

God - Antall enheter: 1 - Inkludert: Stereo sett - Power supply

Philips - D8278 Stereo sett

God - Antall enheter: 1 - Inkludert: Faststoff flerkanalsmottaker - No extra's

Denon - AVR-1803 Faststoff flerkanalsmottaker

Veldig god - Antall enheter: 1 - Inkludert: No extra's, No cables

Dual - CS 435 Platespiller

Veldig god - Antall enheter: 2 - Inkludert: Hi-fi sett - Power cord

GoldStar - GSQ-5200 (frekvensjustering) og GST-5200 (tuner) Hi-fi sett - Flere modeller

Lydutstyr

Dette objektet er ikke lenger tilgjengelig, men det er fortsatt mye å utforske

Pioneer - PL-50 Platespiller

Populær i Lydutstyr

995 objekter

Relaterte samlinger