Märklin H0 - 6002/6043 - Transformer (2) - Memory in Switchboard

Märklin 6043 - Memory

For switching 24 programmable routes.
The programmed routes can be activated via the memory keyboard or automatically by the train.
Various electrical accessories can be operated with the push of a button.
The memory in each of the 24 possible routes stores the set commands for up to 20 switches or signals. A maximum of 4 memories can be linked to the control unit.
Input of commands can be done via a keyboard or an interface.
The current electrical routing is displayed by means of LEDs.

6041 Switchboard

The switchboard can operate a total of 16 switches or signals.
However, the feedback is not linked to an actual report from the operated article.

The switchboard can control four groups of four switches or signals at a time, which are connected to the same K83 decoder or K84 decoder. Addresses 1 through 4 correspond to the four outputs of the first decoder, 5 through 8 to the second decoder, and so on. To control more than 16 switches/signals via additional K83/K84 decoders, the switchboard can be addressed at the rear using dipswitches. Operation is carried out using buttons of your choice, as long as they are momentary contact switches. Feedback is provided through lamps or LEDs of your choice at each button pair. The switchboard must be equipped with its own power supply for signaling.
See photos for a good impression.