Akai - AM-2400 / AT-2450 Hi-fi set - Multiple models
06
days
17
hours
06
minutes
52
seconds
Current bid
€ 13
Reserve price not met
Expert
Selected by Ariel Cabello
Holds dual bachelor's degrees in electronics and physics with 20 years in audio engineering.
Estimate € 380 - € 450
9 other people are watching this object
 Bidder 7850 | €13 |
|---|
Catawiki Buyer Protection
Your payment’s safe with us until you receive your object.View details
Trustpilot 4.4 | 125387 reviews
Rated Excellent on Trustpilot.
Akai stereo audio set consisting of the AM-2400 integrated amplifier and AT-2450 tuner, manufactured in 1979, in very good physical condition and tested and functional.
AI-assisted summary
Description from the seller
Vintage Akai stereo audio system. High gain.
Checked and fully operational.
The amplifier sounds phenomenal.
Additionally, it's built like a tank.
With a nominal power of 40 W per channel, which is just the minimum, it would be around 50 W per channel or more.
Akai gave them a low power output, which leaves room if you need more power.
80 watts of pure power !!!!
Capable of driving speakers rated at more than 150 watts into an 8-ohm load without any problem.
This amplifier has a very full sound and solid bass.
And what can I say about the tuner — classic style, and the sound is rich and full. The dials and switches have a professional feel.
The photos are part of the description.
The team is composed of two separate units.
Tuner: The top model is the Akai AT-2450 FM/AM stereo tuner. The lights were changed to green LEDs, making it look stunning in the dark.
The lower model is the Akai AM-2400 integrated stereo amplifier.
Both devices were manufactured by Akai in the late 1970s to early 1980s.
Akai AM-2400
Stereo integrated amplifier (1976-79)
Output power: 40 watts per channel at 8 Ω (stereo)
Frequency response: 20 Hz to 20 kHz
Total harmonic distortion: 0.15%
Damping factor: 60
Input sensitivity: 3 mV (MM), 150 mV (DIN), 150 mV (line)
Signal-to-noise ratio: 75dB (MM), 95dB (line)
Channel separation: 55dB (MM)
Output: 150 mV (line), 30 mV (DIN)
Speaker load impedance: 4 Ω to 16 Ω
Semiconductors: 33 x transistors, 15 x diodes.
Dimensions: 440 x 141 x 331 mm
Weight: 9.1 kg
Akai AT-2450
AM/FM stereo tuner (1979-80)
Replaced white bulbs with green LEDs.
Type: Mono/stereo tuner
Tuning bands: FM, MW
Tuning scale: analog
FM tuning range: 87.5 to 108 MHz
MW tuning range: 520 to 1605 kHz
Sensitivity: 1.7 μV (FM), 15 μV (MW)
Signal-to-noise ratio: 75 dB (FM), 55 dB (MW)
Distortion: 0.2% (FM)
Selectivity: 80dB (FM), 30dB (MW)
Frequency response: 20 Hz to 15 kHz (FM)
Output: 2000 mV
Semiconductors: 9 x transistors, 14 x diodes, 1 x FET, 4 x IC
Dimensions: 440 x 144 x 368 mm
Weight: 7.3 kg
It will be sent with UPS using Catawiki's smart shipping.
Well protected and insured.
Vintage Akai stereo audio system. High gain.
Checked and fully operational.
The amplifier sounds phenomenal.
Additionally, it's built like a tank.
With a nominal power of 40 W per channel, which is just the minimum, it would be around 50 W per channel or more.
Akai gave them a low power output, which leaves room if you need more power.
80 watts of pure power !!!!
Capable of driving speakers rated at more than 150 watts into an 8-ohm load without any problem.
This amplifier has a very full sound and solid bass.
And what can I say about the tuner — classic style, and the sound is rich and full. The dials and switches have a professional feel.
The photos are part of the description.
The team is composed of two separate units.
Tuner: The top model is the Akai AT-2450 FM/AM stereo tuner. The lights were changed to green LEDs, making it look stunning in the dark.
The lower model is the Akai AM-2400 integrated stereo amplifier.
Both devices were manufactured by Akai in the late 1970s to early 1980s.
Akai AM-2400
Stereo integrated amplifier (1976-79)
Output power: 40 watts per channel at 8 Ω (stereo)
Frequency response: 20 Hz to 20 kHz
Total harmonic distortion: 0.15%
Damping factor: 60
Input sensitivity: 3 mV (MM), 150 mV (DIN), 150 mV (line)
Signal-to-noise ratio: 75dB (MM), 95dB (line)
Channel separation: 55dB (MM)
Output: 150 mV (line), 30 mV (DIN)
Speaker load impedance: 4 Ω to 16 Ω
Semiconductors: 33 x transistors, 15 x diodes.
Dimensions: 440 x 141 x 331 mm
Weight: 9.1 kg
Akai AT-2450
AM/FM stereo tuner (1979-80)
Replaced white bulbs with green LEDs.
Type: Mono/stereo tuner
Tuning bands: FM, MW
Tuning scale: analog
FM tuning range: 87.5 to 108 MHz
MW tuning range: 520 to 1605 kHz
Sensitivity: 1.7 μV (FM), 15 μV (MW)
Signal-to-noise ratio: 75 dB (FM), 55 dB (MW)
Distortion: 0.2% (FM)
Selectivity: 80dB (FM), 30dB (MW)
Frequency response: 20 Hz to 15 kHz (FM)
Output: 2000 mV
Semiconductors: 9 x transistors, 14 x diodes, 1 x FET, 4 x IC
Dimensions: 440 x 144 x 368 mm
Weight: 7.3 kg
It will be sent with UPS using Catawiki's smart shipping.
Well protected and insured.
Details
Era
1900-2000
Brand
Akai
Model
AM-2400 / AT-2450
Multiple Models
Yes
Physical condition
Very good
Nr of items
2
Includes
Power cord
Serial Number
40344-15067
Year of Manufacturing
1979
Weight
18 kg
Functional condition
Tested and working/playable
Height
300 mm
Width
440 mm
Depth
370 mm
Sold by
