Uher - Report 4200 3-head Portable tape recorder

Rare collectors item!
Excellent looking with original leather case.
In working condition! Clean in and out side.
Including original case and power adapter.
The Uher 4200 professional stereo portable battery operated tape recorder has been engineered to meet the most rigid standards for quality, dependability, versatility - and all in full stereo.

Contacts cleaned, all functions works correct.
New belts placed.
Also recordings sounds excellent.
Heads are clean and sounds as new.
Including all the reels on the photos.
Lovely round VU meters.
Tape-Source switch.
Including 2 Din to rca cables
The flywheel is a bit noisy, but you don't hear this in the audio from the tape, also when recording. It sound perfect.
All speeds work.

The full research and development facilities of the Uher factory have combined to produce the unique Uhe; and it's reproductive capabilities are limitless.

Manufacturer: Uher
Model: Uher 4200 Report Monitor
Type: Reel-to-reel tape
Years of manufacture: 1979 - 1993
Manufactured in: Munich, Germany
Color: grey silver
Remote control: optional
Power consumption: approx. 3 W
Dimensions (WxHxD): 285 x 95 x 227 mm
Weight: 3.8 kg
Original price approx.: 1'248 DM

Connections

Number of inputs: 3
Microphone: Contact assignment 3/5 and 2 (2 = ground) Pin 8: +5 V, input voltage range 0.1 mV - 40 mV (source resistance 200 Ohm), input resistance ---
Radio: pin assignment 1/4 and 2 (2 = ground), input voltage range 1 mV - 400 mV, input resistance 10 kOhm
Phono (high level): contact assignment 3/5 and 2 (2 = ground), input voltage range 50 mV - 20 V, input resistance 470kOhm
Number of outputs: 4
Radio: contact assignment 3/5 and 2 (2 = ground), output voltage 775 mV (0 dB), output resistance: 5.6 kOhm
Monitor: contact assignment 3/5 and 2 (2 = ground), output voltage 775 mV (0 dB), output resistance: 5.6 kOhm

Headphone 1: contact assignment 6.3 mm coaxial socket, output voltage max. 2 V (at 7.8 V and RL -> infinite), output resistance: 33 Ohm
Headphone 2: contact assignment 4/5 and 3/2 (3 = 2 = ground), output voltage max. 2 V (at 7.8 V and RL > 500 Ohm), output resistance: approx. 0.2 Ohm

Technical data

Max. Coil diameter: 13 cm
Tracks: half track according to DIN 45511 part 1
Tone heads: 3
Tape speeds: 2.4 cm/s; 4.75 cm/s; 9.5 cm/s; 19.05 cm/s
Pitch variations (synchronization): maximum +/- 0.14% at 19 cm/s, maximum +/- 0.2% at 9.5 cm/s
Overall frequency response:
at 2.4 cm/s: 25 Hz - 6 kHz.
at 4.75 cm/s: 25 Hz - 13 kHz at 9.5 cm/s: 20 Hz - 16 kHz at 19 cm/s: 20 Hz - 25 kHz High-frequency response (measured on DIN reference empty tape) at 10 kHz:

at 2.4 cm/s: ---
at 4.75 cm/s: -12 dB
at 9.5 cm/s: -8.5 dB
at 19 cm/s: -4.5 dB
Noise-to-voltage ratio (measured on DIN reference blank tape):
at 2.4 cm/s: ---
at 4.75 cm/s: 57 dB
at 9.5 cm/s: 64 dB
at 19 cm/s: 66 dB
External voltage spacing:
Distortion factor:
Equalization:
Noise voltage spacing:
Crosstalk attenuation (measured on DIN reference empty tape) at 1 kHz: mono >= 60 dB
Cancellation attenuation (measured on DIN reference empty tape) at 1 kHz: > 80 dB
RF bias frequency: approx. 100 kHz

Special Equipment

Three-head machine with monitor circuit for backband control
level control via illuminated peak voltage meters with automatic timer for illumination

Display of the playback level at the level meters
Light emitting diode operation indicators
Battery control
Electronic amplifier switching
Power supply for condenser microphones from the unit via the microphone sockets
Tape tension control
3-digit counter
Control loudspeaker, can be switched off
Remote start/stop, yellow LED indicates remote stop function
Dimensionally stable, resistant all-metal housing made of die-cast aluminium
Die-cast aluminium head support
Wide range of accessories

Carefully insured shipped