Akai - AM-2250 Solid state integrated amplifier, AT-2250 Tuner - Stereo set






Holds dual bachelor's degrees in electronics and physics with 20 years in audio engineering.
| €150 | ||
|---|---|---|
| €90 | ||
| €80 | ||
Catawiki Buyer Protection
Your payment’s safe with us until you receive your object.View details
Trustpilot 4.4 | 122473 reviews
Rated Excellent on Trustpilot.
Akai AM-2250 solid-state integrated amplifier and AT-2250 tuner from the late 1970s, tested and working, in good physical condition, weight 10 kg, includes power cord, two items.
Description from the seller
Pretty silver model AKAI AM – 2250 & AT - 2250 vintage from the late 70s '
This amazing "little" AKAI AM-2250, very dynamic, remains excellent for piloting two pairs of speakers, ideally insensitive, small or medium-sized. Very nice finishes: beautiful chrome metal buttons, wear trace to the left of the potentiometer, oversized power supply, exemplary interior construction, amplifies 5 sources and feeds 2 pairs of speakers, separately or simultaneously. The Tuner AT-2250 is a high quality beautiful tuner, leds need to replaced.
AM-2250 SPECS:
Power output: 25 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 40kHz
Total harmonic distortion: 0.2%
Damping factor: 50
Input sensitivity: 3mV (MM), 150mV (DIN), 150mV (line)
Signal to noise ratio: 75dB (MM), 95dB (line)
Channel separation: 45dB (MM)
Output: 150mV (line), 30mV (DIN)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 3 x transistors, 4 x diodes, 2 x IC
Dimensions: 380 x 130 x 220mm
AT-2250 SPECS:
Type: Mono/Stereo Tuner
Tuning Bands: FM, MW
Tuning Scale: Analogue
FM Tuning Range: 87.5 to 108 MHz
MW Tuning Range: 520 to 1605 kHz
Sensitivity: 1.9uV (FM), 100uV (MW)
Signal to Noise Ratio: 70dB (FM), 55dB (MW)
Distortion: 0.2% (FM)
Selectivity: 65dB (FM), 30dB (MW)
Output: 500mV (FM), 500mV (MW)
Semiconductors: 6 x transistors, 7 x diodes, 1 x FET, 3 x IC
Dimensions: 380 x 130 x 220mm
Weight: 4.7kg
Year: 1978
To deliver this product properly, it is carefully packed in very strong boxes, thereby wrapped in bubble wrap with lots of padding. We mainly use plastic to fill up the package, if wished differently please contact us. The package is shipped insured to protect both the buyer and seller. For further packing wishes please message after purchase. Photos serve as additional description of product condition / condition of display & LEDs. Please review them carefully before purchase. Orders to islands, or special destinations have a higher shipping cost, for example; Canary Islands
Seller's Story
Pretty silver model AKAI AM – 2250 & AT - 2250 vintage from the late 70s '
This amazing "little" AKAI AM-2250, very dynamic, remains excellent for piloting two pairs of speakers, ideally insensitive, small or medium-sized. Very nice finishes: beautiful chrome metal buttons, wear trace to the left of the potentiometer, oversized power supply, exemplary interior construction, amplifies 5 sources and feeds 2 pairs of speakers, separately or simultaneously. The Tuner AT-2250 is a high quality beautiful tuner, leds need to replaced.
AM-2250 SPECS:
Power output: 25 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 40kHz
Total harmonic distortion: 0.2%
Damping factor: 50
Input sensitivity: 3mV (MM), 150mV (DIN), 150mV (line)
Signal to noise ratio: 75dB (MM), 95dB (line)
Channel separation: 45dB (MM)
Output: 150mV (line), 30mV (DIN)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 3 x transistors, 4 x diodes, 2 x IC
Dimensions: 380 x 130 x 220mm
AT-2250 SPECS:
Type: Mono/Stereo Tuner
Tuning Bands: FM, MW
Tuning Scale: Analogue
FM Tuning Range: 87.5 to 108 MHz
MW Tuning Range: 520 to 1605 kHz
Sensitivity: 1.9uV (FM), 100uV (MW)
Signal to Noise Ratio: 70dB (FM), 55dB (MW)
Distortion: 0.2% (FM)
Selectivity: 65dB (FM), 30dB (MW)
Output: 500mV (FM), 500mV (MW)
Semiconductors: 6 x transistors, 7 x diodes, 1 x FET, 3 x IC
Dimensions: 380 x 130 x 220mm
Weight: 4.7kg
Year: 1978
To deliver this product properly, it is carefully packed in very strong boxes, thereby wrapped in bubble wrap with lots of padding. We mainly use plastic to fill up the package, if wished differently please contact us. The package is shipped insured to protect both the buyer and seller. For further packing wishes please message after purchase. Photos serve as additional description of product condition / condition of display & LEDs. Please review them carefully before purchase. Orders to islands, or special destinations have a higher shipping cost, for example; Canary Islands
