Intérieurs et décoration

Bijoux et pierres précieuses

Montres, stylos et briquets

Mode

Monnaies et timbres

Bandes dessinées et animation

Voitures et motos de collection et automobilia

Vins, whisky et spiritueux

Art asiatique et tribal

Cartes à collectionner

Jouets et modélisme

Archéologie et histoire naturelle

Sports

Musique, films et appareils photo

Livres et souvenirs historiques

La science du son, une expérience immersive, présentée par {name}

Ariel Cabello

This lot contains:

2x BeoLab 9 active speakers
2x Black Covers
2x 220 Volt powercords

( please note that the rear cable covers are missing) 


Bang & Olufsen BeoLab 9 active loudspeakers, boasting a strong bass performance with B&O’s distinctive acoustic lens cast from zinc and plated with matt chrome. With some beautiful details, including the LED light acoustic lens with a red standby or green active light. The majority of The design of BeoLab 9 continues B&O’s move away from elegant though easily imitated column loudspeakers to shorter, rounder forms with larger cabinet volumes and better potential for strong bass performance.

B&O’s distinctive acoustic lens is also present, and the speakers’s height means that it is perfectly positioned at ear-level when the listener is seated.the cabinet is fabric covered, with three drivers: a 10” bass unit in an 18 litre enclosure, a 5” mid-range unit in a 4 litre enclosure and a 0.75” treble unit in the acoustic lens. All drivers are separately amplified with the bass ICEpower amplifier of 500W which drives the bass unit. The mid-range and treble units each have their own 100W analogue hybrid amplifier. Bang & Olufsen have once again gone beyond all expectations to make the truly breathtaking BeoLab 9.

The BeoLab 9 was to be an important product for B&O. Placed near the top of the loudspeaker range, It was intended to replace the Beolab 8000 as the most visually distinctive model in the B&O loudspeaker line. Even though the Beolab 8000 was only an average performer it was visually both distinctive and attractive. Such was the success of the styling of the Beolab 8000 that it had remained in the range unaltered in appearance since 1992, a tough act to follow.

Technically, the BeoLab 9 replaced the BeoLab 1. It used similar internal arrangements, though in detail it was all new. When compared to the Beolab 8000 the accent was clearly on performance, with larger drive units and much more powerful amplification. The move away from a column to a cone shape also allowed larger drive units than the BeoLab 1 could accommodate, which was also encouraging from a sound quality point of view. The new shape also gave a visual link to the BeoLab 5, though the two models had little of substance in common.

The most distinctive feature of the BeoLab 9’s design was the “acoustic lens” that surrounded the upward facing tweeter. The action of the acoustic lens is explained in the description of the BeoLab 5 and the same principles, though on a smaller scale, were applied to the design of the BeoLab 9.

The BeoLab 9 used 3 drive units, described as a 10” woofer, a 5” midrange and a 0.75” dome tweeter. This made for a nominally 3-way loudspeaker, though given the sizes of the drive units and their crossover points the effect was more akin to a small 2-way loudspeaker working in conjunction with a well-matched subwoofer. This setup can be contrasted with the earlier Uniphase models (e.g. the Beovox S 80.2) to see how the design parameters had changed.

As 3-way active design the BeoLab 9 required three separate power amplifiers. B&O demonstrated their ability to for a rational solution from the available technologies by selecting a class-D amplifier (ICE Power to give it its marketing name) for the woofer and two conventional linear class AB amplifiers for the midrange and treble. This was an inspired choice, the bass amplifier could be made very powerful (500W) without having to make the cabinet too big or the heat sinks too obtrusive and the heavy, and the well damped bass driver was largely insensitive to the types of distortion it generated. Meanwhile, the sensitive midrange and tweeter loudspeakers, which at 100W each needed much less power, were fed with a pure signal which only a proper linear amplifier can provide. A hybrid based design was chosen using a single package whose two channels would normally have been used for left and right in a conventional amplifier. This arrangement was common to many loudspeakers in the BeoLab range.

An electronic switch mode power supply was used instead of a conventional mains transformer, bringing with it the advantages of high power density, low cost, light weight and the elimination of the need to adjust the line voltage for different markets. The last item was the only one of technical merit, although one can see how the other attributes would be attractive to the manufacturer.

B&O were clearly conscious of the poor reliability record of their earlier active loudspeaker models when designing the BeoLab 9. Elaborate protection systems were built in that protected the loudspeaker units against both overdriving and overheating. This was clearly wise given the BeoLab 9’s potential power output.

Connections to the audio system were made by Powerlink cables. Older or non-B&O equipment could be made using special cables terminated in a variety of standard type plugs. A switch on the loudspeakers set the input to “line” mode to allow these cables to operate correctly. The traditional “free/wall/corner” equalising switch was also present. The BeoLab 9 lacked the complex digital input, digital signal processing and automatic calibration functions of the BeoLab 5 but then it was also considerably cheaper. High quality was assured as the available resources were directed towards the essential parts of an active loudspeaker rather than clever gimmicks that were unlikely to be used much.

Well designed, well thought out and well made, the BeoLab 9 really did deserve success.

Très bon - Nombre d'articles : 2 - Y compris : Ensemble d’enceintes actives - Cordon d’alimentation

Bang & Olufsen - Beolab 9 Ensemble d’enceintes actives

Équipement audio

Prix de réserve

Sans prix de réserve

Achat immédiat

Budget

Jour de clôture

demain

mercredi

jeudi

lundi

mardi

vendredi

7 mars

Pays

Pays-Bas

Italie

Allemagne

Espagne

France

Belgique

Roumanie

Danemark

Japon

Pologne

Autriche

Portugal

Grèce

Hongrie

Lituanie

Lettonie

Royaume-Uni

Luxembourg

Suisse

République tchèque

Estonie

Finlande

Hong Kong

Suède

Slovaquie

Marque

Bang & Olufsen

Sony

Pioneer

Philips

Bose

Marantz

Technics

Akai

Denon

Harman Kardon

Kenwood

Yamaha

Dual

Grundig

Sansui

Onkyo

Bower & Wilkins

Luxman

Panasonic

Jamo

Revox

Klipsch

Objet

Ensemble d’enceintes

Amplificateur intégré à semi-conducteurs

Lecteur de CD

Récepteur stéréo à semi-conducteurs

Tourne-disque

Ensemble hi-fi

Récepteur multicanaux à semi-conducteurs

Enceinte

Lecteur de cassettes audio

Lecteur-enregistreur de cassettes

Radio

Table tournante

Tuner

Radio à tube

Ensemble de hauts-parleurs subwoofer

Ensemble stéréo

Casque d'écoute

Composant audio

Amplificateur audio

Pont de bobine à bobine 18 cm

Amplificateur à semi-conducteurs

Amplificateur stéréo à semi-conducteurs

TV à écran plat

Radio portable

Walkman

Pays d’origine

États-Unis

Matériau

Plastique

Aluminium

Métal

Bois

Plaqué or

État

Excellent

Très bon

État neuf

Divers états

Très bon plus (TB+)

Bon état - Utilisé, présentant de petites traces de vieillissement

Acceptable & mauvais

Parfait (P)

Bon état - quelques usures et tâches dues à l’âge

Comme neuf, inutilisé

Excellent état, à peine utilisé avec des signes minimes d'usure

État assez bien - utilisé intensivement & représentant d’éventuelles manques mineures

Suppléments

Aucun extra

Cordon d’alimentation

+ Élément supplémentaire (voir description)

Commande à distance

Coffret

Bloc d’alimentation

Manuel d’utilisation original

Remis à neuf

Adaptateur secteur

Aucun câble

Boîte

Brochures

Flight case

Suspension pour microphones

+élément supplémentaire (voir description)

Filtre anti-pop

Dans la boîte d'origine

Édition limitée

Époque

2010-2020

2000-2010

1970-1980

1980-1990

2020 et après

1940-1950

1960-1970

2025

Style

Vintage

Design scandinave

Contemporain

Couleur

Brun

Noir

Bleu

Gris

Orange

Argent

Blanc

Échelle

1:12

Série

Testé et en état de marche

Testé et en état de fonctionnement

Non testé

Maison de disques

1900-2000

Après 2000

1400-1900

Avant 1400

Qualification

Original/officiel

Créateur

Dieter Rams

Japan & Related

Franco Albini

Achille Castiglioni

Richard Sapper

Marco Zanuso

Excellent - Nombre d'articles : 2 - Y compris : Ensemble d’enceintes - Aucun extra

Bower & Wilkins - 203i Ensemble d’enceintes

Excellent - Nombre d'articles : 1 - Y compris : Cordon d’alimentation

Schaub - Exquisit IR Radio à tube

Excellent - Nombre d'articles : 1 - Y compris : Gramophone - Cordon d’alimentation

Équipement audio

Cet objet n’est plus disponible, mais il en reste beaucoup d’autres à découvrir

Bang & Olufsen - Beolab 9 Ensemble d’enceintes actives

Populaire dans la catégorie Équipement audio

1137 objets

Collections en lien avec ce thème