Marantz - PM8006 Solid state integrated amplifier





Add to your favourites to get an alert when the auction starts.
Catawiki Buyer Protection
Your payment’s safe with us until you receive your object.View details
Trustpilot 4.4 | 132745 reviews
Rated Excellent on Trustpilot.
Description from the seller
I am selling a Marantz PM 8006 amplifier.
This amplifier is purely analog in class AB.
It can be used in a home cinema system as a power amplifier thanks to the "power amplifier direct" button.
It also features the "direct source" system allowing you to bypass tone controls and balance to achieve listening closer to the original mix of the source.
It remains one of the few amplifiers to offer a triple tone control.
It also has a Marantz Musical Phono EQ phono preamplifier stage of top quality.
This amplifier is ideal for long listening sessions at low or medium volume without any fatigue, with a warm yet dynamic sound in which vocals are highlighted. Its power reserve can drive almost all market loudspeakers and can handle loud listening levels.
It excels with rock, jazz, pop, or classical music.
You will easily find complete reviews on the internet praising this device.
Specifications:
RMS output power (both channels driven, 20 Hz to 20 kHz):
70 W x 2 (8 Ω load)
100 W x 2 (4 Ω load)
Total harmonic distortion (both channels driven, 20 Hz to 20 kHz, 8 Ω load): 0.02 %
Output bandwidth (8 Ω load, 0.06 %): 5 Hz – 60 kHz
Frequency response (CD, 1 W, 8 Ω load): 5 Hz – 100 kHz ±3 dB
Damping factor (8 Ω load, 40 Hz to 20 kHz): 100
Input sensitivity/ Input impedance
PHONO (MM): 2.0 mV / 47 kΩ
CD, TUNER, NETWORK, AUX, RECORDER: 220 mV / 20 kΩ
POWER AMP DIRECT IN: 1.6 V / 15 kΩ
Output voltage/Output impedance
PRE OUT: 1.6 V / 600 Ω
Maximum permitted PHONO input level (1 kHz) MM: 80 mV
RIAA deviation (20 Hz to 20 kHz): ±0.5 dB
S/N (IHF-A, 8 Ω load)
PHONO (MM): 87 dB (5 mV input, 1 W output)
CD, TUNER, NETWORK, AUX, RECORDER: 106 dB (2 V input, nominal output)
POWER AMP DIRECT IN: 125 dB (nominal output)
Tone control
BASS (50 Hz): ±10 dB
MID (900 Hz): ±6 dB
TREBLE (15 kHz): ±10 dB
Power requirements:
AC 120 V, 60 Hz
Electrical consumption:
220 W
Standby power consumption:
0.2 W
The unit is in perfect working order.
Cosmetic flaws to note: four scratches on the left and top flanks of the lid, one impact on the upper front panel, and a mark on the front panel near the volume control (invisible to the naked eye, felt by touch). All defect photos were taken less than 10 cm from the defects.
The amplifier will be shipped with its fully functional remote control in very good condition, as well as its power cord.
I do not have the original packaging. The product will be shipped in an appropriate box with adequate protections. Delivery will be at my cost.
I am selling a Marantz PM 8006 amplifier.
This amplifier is purely analog in class AB.
It can be used in a home cinema system as a power amplifier thanks to the "power amplifier direct" button.
It also features the "direct source" system allowing you to bypass tone controls and balance to achieve listening closer to the original mix of the source.
It remains one of the few amplifiers to offer a triple tone control.
It also has a Marantz Musical Phono EQ phono preamplifier stage of top quality.
This amplifier is ideal for long listening sessions at low or medium volume without any fatigue, with a warm yet dynamic sound in which vocals are highlighted. Its power reserve can drive almost all market loudspeakers and can handle loud listening levels.
It excels with rock, jazz, pop, or classical music.
You will easily find complete reviews on the internet praising this device.
Specifications:
RMS output power (both channels driven, 20 Hz to 20 kHz):
70 W x 2 (8 Ω load)
100 W x 2 (4 Ω load)
Total harmonic distortion (both channels driven, 20 Hz to 20 kHz, 8 Ω load): 0.02 %
Output bandwidth (8 Ω load, 0.06 %): 5 Hz – 60 kHz
Frequency response (CD, 1 W, 8 Ω load): 5 Hz – 100 kHz ±3 dB
Damping factor (8 Ω load, 40 Hz to 20 kHz): 100
Input sensitivity/ Input impedance
PHONO (MM): 2.0 mV / 47 kΩ
CD, TUNER, NETWORK, AUX, RECORDER: 220 mV / 20 kΩ
POWER AMP DIRECT IN: 1.6 V / 15 kΩ
Output voltage/Output impedance
PRE OUT: 1.6 V / 600 Ω
Maximum permitted PHONO input level (1 kHz) MM: 80 mV
RIAA deviation (20 Hz to 20 kHz): ±0.5 dB
S/N (IHF-A, 8 Ω load)
PHONO (MM): 87 dB (5 mV input, 1 W output)
CD, TUNER, NETWORK, AUX, RECORDER: 106 dB (2 V input, nominal output)
POWER AMP DIRECT IN: 125 dB (nominal output)
Tone control
BASS (50 Hz): ±10 dB
MID (900 Hz): ±6 dB
TREBLE (15 kHz): ±10 dB
Power requirements:
AC 120 V, 60 Hz
Electrical consumption:
220 W
Standby power consumption:
0.2 W
The unit is in perfect working order.
Cosmetic flaws to note: four scratches on the left and top flanks of the lid, one impact on the upper front panel, and a mark on the front panel near the volume control (invisible to the naked eye, felt by touch). All defect photos were taken less than 10 cm from the defects.
The amplifier will be shipped with its fully functional remote control in very good condition, as well as its power cord.
I do not have the original packaging. The product will be shipped in an appropriate box with adequate protections. Delivery will be at my cost.

