Sansui - AU-117 + TU-217 Hi-fi set






Holds dual bachelor's degrees in electronics and physics with 20 years in audio engineering.
Catawiki Buyer Protection
Your payment’s safe with us until you receive your object.View details
Trustpilot 4.4 | 133613 reviews
Rated Excellent on Trustpilot.
Sansui AU-117 + TU-217 vintage hi‑fi set, with two units, weight 12 kg, physical condition very good and tested and functional.
Description from the seller
Sansui AU-117 + TU-217 vintage hifi-set
Legendary set from Sansui, in very nice and technically very good condition
The set has been thoroughly inspected by a specialist and also cleaned inside and out
Optically, the set is in very good condition, with only very small signs of use
With its matte black aluminum fronts with large black knobs, this set has a gorgeous and high-quality vintage look
These Sansui AU series amplifiers have now achieved a cult status among enthusiasts, with that typical '70s warm and powerful Sansui sound and timeless, stylish looks
The AU-117 amplifier is equipped with several connection options: tuner, aux, tape monitor and of course a very good phono input for connecting a turntable
The TU-217 tuner delivers crystal-clear and interference-free FM stereo reception, even with a simple wire as an antenna. This tuner sounds truly fantastic
The set is complete with the required RCA cables
Please view the detailed photos; they form part of the item description
The set will be shipped with the utmost care insured in 2 separate packages (hence the slightly higher shipping costs
SPECS AU-117:
Power output: 15 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 40kHz
Total harmonic distortion: 0.17%
Damping factor: 50
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 76dB (MM), 94dB (line)
Channel separation: 65dB (MM), 68dB (line)
Output: 150mV (line)
Speaker load impedance: 8Ω (minimum)
Semiconductors: 25 x transistors, 7 x diodes, 1 x zener diode, 1 x LED
Dimensions: 430 x 110 x 340mm
Weight: 6.4kg
SPECS TU-217:
Type: Mono/Stereo Tuner
Tuning Bands: FM, MW
Tuning Scale: Analogue
FM Tuning Range: 88 to 108 MHz
MW Tuning Range: 530 to 1600 kHz
Sensitivity: 1.85uV (FM), 220uV (MW)
Signal to Noise Ratio: 75dB (FM), 48dB (MW)
Distortion: 0.35% (FM), 0.4% (MW)
Selectivity: 50dB (FM), 35dB (MW)
Frequency response: 30Hz to 15kHz (FM)
Output: 775mV
Semiconductors: 8 x transistors, 6 x diodes, 1 x FET, 4 x IC
Dimensions: 430 x 110 x 307mm
Weight: 5.3kg
Seller's Story
Sansui AU-117 + TU-217 vintage hifi-set
Legendary set from Sansui, in very nice and technically very good condition
The set has been thoroughly inspected by a specialist and also cleaned inside and out
Optically, the set is in very good condition, with only very small signs of use
With its matte black aluminum fronts with large black knobs, this set has a gorgeous and high-quality vintage look
These Sansui AU series amplifiers have now achieved a cult status among enthusiasts, with that typical '70s warm and powerful Sansui sound and timeless, stylish looks
The AU-117 amplifier is equipped with several connection options: tuner, aux, tape monitor and of course a very good phono input for connecting a turntable
The TU-217 tuner delivers crystal-clear and interference-free FM stereo reception, even with a simple wire as an antenna. This tuner sounds truly fantastic
The set is complete with the required RCA cables
Please view the detailed photos; they form part of the item description
The set will be shipped with the utmost care insured in 2 separate packages (hence the slightly higher shipping costs
SPECS AU-117:
Power output: 15 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 40kHz
Total harmonic distortion: 0.17%
Damping factor: 50
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 76dB (MM), 94dB (line)
Channel separation: 65dB (MM), 68dB (line)
Output: 150mV (line)
Speaker load impedance: 8Ω (minimum)
Semiconductors: 25 x transistors, 7 x diodes, 1 x zener diode, 1 x LED
Dimensions: 430 x 110 x 340mm
Weight: 6.4kg
SPECS TU-217:
Type: Mono/Stereo Tuner
Tuning Bands: FM, MW
Tuning Scale: Analogue
FM Tuning Range: 88 to 108 MHz
MW Tuning Range: 530 to 1600 kHz
Sensitivity: 1.85uV (FM), 220uV (MW)
Signal to Noise Ratio: 75dB (FM), 48dB (MW)
Distortion: 0.35% (FM), 0.4% (MW)
Selectivity: 50dB (FM), 35dB (MW)
Frequency response: 30Hz to 15kHz (FM)
Output: 775mV
Semiconductors: 8 x transistors, 6 x diodes, 1 x FET, 4 x IC
Dimensions: 430 x 110 x 307mm
Weight: 5.3kg
