NAD - C720BEE Solid state stereo receiver

NAD C720BEE — Bjorn Erik Edvardsen, who signs here a design that will go down in the audiophile world.
This man was the initiator of the audiophile movement when he created the 3020. By designing the C320 BEE, he increased the power and improved the volume control of the already highly regarded C320.
Its circuit is designed to deliver exceptional dynamic performance.
The perceived power is far greater than it seems thanks to a very large, unsaturating reserve.
This translates into exceptional liveliness and accuracy.
If you want to combine a tuner and a high‑quality amplifier in the same unit, then the C720 BEE is for you.
Section preamp:
Line input: Sensitivity: 220 mV Impedance: 200 kΩ / 320 pF Maximum input level: 6 V Maximum preamp output: 12 V
- tape deck: 10 V S/N ratio and preamp output: 106 dB Frequency response: 3 Hz - 70 kHz ±0.3 dB Line output: 80 ohms Tape output: Z 1 kΩ
Correction: Bass (± 8 dB at 100 Hz) - Treble (± 5 dB at 10 kHz)
Section amplifier: Power: 2 x 50 W RMS (8 ohms)
Peak power IHF - 110 W / 8 ohms - 160 W / 4 ohms - 210 W / 2 ohms
Distortion: 0.03% (20 Hz - 20 kHz)
Soft-clipping threshold power: 68 W
Damping factor (1 kHz - 8 ohms): > 160
Input sensitivity: 630 mV / 20 kΩ / 470 pF
Voltage gain: 29 dB
Frequency response: 20 Hz - 20 kHz (±0.3 dB) and 3 Hz - 70 kHz (-3 dB)
Signal-to-noise ratio: 100 dB (1 W) - 117 dB (maximum power) MultiRoom

Section tuner RDS:
Input sensitivity: 16.1 dBf 1.0 μVf / 0.9 μV DIN
Total harmonic distortion: Mono: 0.25% Stereo: 0.5%
Channel separation: 40 dB
Frequency response: 30 Hz - 15 KHz
Headphone output
Remote control
Dimensions (W x H x D): 435 x 132 x 350 mm
- Weight: 6.5 kg.