NAD - C720BEE Solid state stereo receiver

NAD C720BEE
Bjorn Erik Edvardsen, who signs here a realization that will go down in the audiophile world.
This man was at the initiative of the audiophile movement when he created the 3020. In designing the C320 BEE, he increased the power and improved the volume control of the already highly appreciated C320.
His circuit is designed to have exceptionally dynamic behavior.
The perceived power is much higher than it appears thanks to a very large, unsaturated reserve.
This translates into exceptional liveliness and accuracy.
If you want to combine a tuner and a high-quality amplifier in the same unit, then the C720 BEE is for you.
Preamp section:
Line input: Sensitivity: 220 mV Impedance: 200 kΩ / 320 pF Maximum input level: 6 V Max preamp output level: 12 V
- Tape recorder: 10 V S/B ratio and preamp output: 106 dB Frequency response: 3 Hz - 70 kHz ±0.3 dB Line output: 80 Ω Tape output: Z 1 kΩ
Bass correction: Low (± 8 dB at 100 Hz) - Treble (± 5 dB at 10 kHz)
Amplifier section:
Power: 2 x 50 W RMS (8 Ω)
IHF peak power: 110 W / 8 Ω - 160 W / 4 Ω - 210 W / 2 Ω
Distortion: 0.03% (20 Hz - 20 kHz)
Soft-clipping trigger power: 68 W
Damping factor (1 kHz - 8 Ω): > 160
Input sensitivity: 630 mV / 20 kΩ / 470 pF
Voltage gain: 29 dB
Frequency response: 20 Hz - 20 kHz (±0.3 dB) and 3 Hz - 70 kHz (-3 dB)
Signal-to-noise ratio: 100 dB (1 W) - 117 dB (maximum power)
MultiRoom
Tuner section RDS:
Input sensitivity: 16.1 dBf 1.0 μV/VIHF / 0.9 μV DIN
Harmonic distortion: Mono: 0.25% Stereo: 0.5%
Channel separation: 40 dB
Frequency response: 30 Hz - 15 kHz
Headphone output
Remote control
Dimensions (L x H x D): 435 x 132 x 350 mm
Weight: 6.5 kg.