Akai - AA-8500 Solid state stereo receiver

Nice Akai Receiver
AA8500

Works well.

Look at the photos carefully; they are part of the description.

Connections:
Number of inputs:
Phono MM: 3 mV, 50 kOhm
AUX: 150 mV, 50 kOhm
Tape Play: 200 mV, 50 kOhm
Tape Play DIN: 200 mV, 50 kOhm
Main In: 770 mV, 100 kOhm
Antenna: 75 Ohm, 300 Ohm
Number of outputs:
Tape Rec: 150 mV
Tape Rec DIN: 25 mV
Pre-Out:
Headphone: 8 - 16 Ohm
2 pairs of speakers

Technical data

Amplifier
Continuous power output (at clipping)
8 Ohm: 2x 65 W 4 Ohm: 2x 85 W
Dynamic power:
8 Ohm: 2x 90 W
4 Ohm: 2x 120 W
Total harmonic distortion: 0.05% at nominal power
Damping factor:
Frequency response: 20 - 50,000 Hz, -3 dB
Signal-to-noise ratio:
Phono: 70 dB
AUX: 80 dB
Tone controls:
Bass: ± 10 dB at 100 Hz
Treble: ± 10 dB at 10 kHz
Loudness: yes, +8 dB at 100 Hz, +4 dB at 10 kHz
Low Filter (Subsonic): yes, -9 dB at 100 Hz
High Filter: yes, -5 dB at 10 kHz
Muting: yes

Tuner
Reception: FM/MW
Frequency range:
FM: 88 - 108 MHz
MW: 535 - 1605 kHz
Input sensitivity:
FM: 2.0 µV
MW: 50 µV
Frequency range:
Distortion factor: 0.3% (mono), 0.8% (stereo). Signal-to-noise ratio: 70 dB
Channel separation: > 40 dB
Selectivity: 65 dB
Selectivity at equal frequencies: 1.5 dB
Suppression of unwanted signals: 34 dB
Mirror frequency suppression: > 100 dB
IF suppression: > 100 dB
AM suppression: 55 dB

Special features
Slide controls for balance, bass and treble
Audio mute (sound suppression)
Tuning aids: field strength and mid-tuning indicator (ratio detector)
FM mute
FM-AFC
MPX filter

Dimensions (w x h x d): 487 x 165 x 346 mm
Weight: 16 kg

Carefully packed and sent with Track & Trace