Sansui - SR 2050 C. Turntable

Sansui SR 2050 C turntable.

This unit is in perfect technical condition.
The visual condition is visible in the photos.

For sale we offer a classic Japanese turntable Sansui SR‑2050C, hailing from the golden era of analog Hi‑Fi equipment.

The model combines the precision and simplicity of a manual turntable with the convenient system of automatic tonearm lift and platter stop after the record ends. Playback starts manually, and once the stylus reaches the end groove the tonearm is gently raised and the drive is switched off.

The Auto Lift system is activated electrically, so the end-of-playback mechanism does not load the tonearm and does not exert additional pressure on the needle or the record.

The turntable is equipped with a heavy aluminum platter, a synchronous motor, belt drive, and a statically balanced tonearm with tracking force and anti-skating adjustment. The classic base finished with walnut veneer gives the device an elegant vintage look.

Specification:
- Recommended cartridge loading impedance: 50 kΩ
- Frequency response of the original cartridge: 20 Hz–20 kHz
- Drive: belt
- Speeds: 33⅓ and 45 rpm
- Motor: synchronous, 4-pole
- Platter: aluminum casting, 301 mm
- Platter mass: about 1.2 kg
- Runout: less than 0.07%
- Signal-to-noise ratio: above 40 dB
- Tonearm: straight, tubular, statically balanced
- Tonearm length: 220 mm
- Overhang: 15 mm
- Tracking force adjustment
- Anti-skating adjustment
- Additional counterweight for tonearm in the lateral plane
- Oil-based, smooth tonearm lift
- Auto Lift after the end of the record
- Auto Stop drive
- Factory cartridge: moving magnet type
- Factory cartridge output voltage: about 5 mV
- Recommended tracking force of factory needle: about 2 g
- Cover: removable, acrylic
- Base finish: natural walnut veneer
- Dimensions: about 439 × 190 × 349 mm
* Approximate weight