Technics - SA-GX100L Solid state stereo receiver

Good working receiver with phono input.

Good stereo fm reception
Fully cleaned in and outside.
With remote control
Technical Data:

Amplifier
Output power: 2 x 40 W (4 or 8 Ω)
Total harmonic distortion at 40 Hz ~ 20 kHz: 0.5% (8 Ω).
Power bandwidth at -3 dB: 10 Hz ~ 40 kHz (8 Ω).
Input sensitivity and impedance.
Phono: 3 mV/47 kW
CD, VCR 1, TAPE/VCR 2: 200 mV/22 kQ.
Maximum TA input voltage (1 kHz, rms): 150 mV
Noise voltage spacing rated power (8 Ω).
Phono: 70 bB (according to IHF, A: 80 dB).
CD, VCR 1, TAPE/VCR 2: 80 bB (according to IHF, A: 90 dB)
Frequency response

Phono: RIAA standard curve, ± 0.8 dB (30 Hz ~ 15 kHz)
CD, VCR 1, TAPE/VCR 2: 10 Hz ~ 40 kHz (± 3 dB)
Tone control
Bass control: 50 Hz, + 10 dB ~ - 10 dB Treble control: 20 kHz, + 10 dB ~ -10 dB

Audible volume control: 50 Hz, +9 dB
Output voltage VCR 1 AUDIO OUT, TAPE/VCR 2 REC OUT: 200 mV
Channel deviation: (250 Hz - 6300 Hz): ±1 dB
Crosstalk attenuation: 55 dB

Headphone level and impedance: 430 mV/330 Ω.
Speaker impedance: 4 ~ 16 Ω (A or B) or 8 ~ 16 Ω (A and B).
FM tuner

Wave band: 87 .50 ~ 1 08.00 MHz
Stereo switching threshold at 46 dB according to IHF: 22 µV/75 W Total harmonic distortion

mono: 0.2%
Stereo: 0.3% Signal-to-noise ratio

Mono: 60 dB (75 dB according to IHF)
Stereo: 58 dB (71 dB according to IHF) Frequency response: 20 Hz ~ 15 kHz, + 1 dB ~ - 2 dB

Separation sharpness at interfering transmitter: 65 dB
capture ratio: 1.0 dB
Mirror frequency attenuation at 98 MHz: 40 dB
IF attenuation at 98 MHz: 70 dB

Response attenuation on spurious frequencies at 98 MHz: 70 dB
MW suppression: 50 dB
Cross-talk attenuation 1 kHz: 40 dB
carrier residual
19 kHz: -55 dB (-60 dB according to IHF)
38 kHz: -50 dB (-55 dB according to IHF)
Channel deviation (250 Hz ~ 6300 Hz): ± 1.5 dB
limiter insert: 1.2 µV

Bandwidth
ZF amplifier: 180 kHz
F-demodulator: 1000 kHz
Antenna connection: 75 W (unbalanced)
MW tuner
Wavebands:
522 kHz ~ 1611 kHz (9 kHz steps).
530 kHz ~ 1620 kHz (10-kHz steps)
Input sensitivity (S/R 20 dB): 20 µV, 330 µV/m
Separation sharpness (at 999 kHz): 55 dB
Mirror frequency attenuation (at 999 kHz): 40 dB
IF attenuation (at 999 kHz): 55 dB

General
Power consumption: 265 W Mains voltage: 220 V alternating current 50 / 60 Hz Dimensions in mm: W.430 - H.124 - D.300 Weight: approx. 5.5 kg


Pictures are description
Carefully insured shipped!