Bang & Olufsen - Beogram 4004 Tangential Tracking Direct-Drive Turntable

Bang & Olufsen - Beogram 4004

In very good condition. It has been serviced and, where necessary, parts replaced so this Beogram can provide many more years of use. The motor has been relubricated (completely disassembled for bearings in oil for 24 hours) and components replaced so the motor spins again.
A fully automatic turntable with a tangential arm, thus better playback quality, partly due to the low tracking force, 1.2 g.
All settings, such as diameter, arm lift mechanism, etc., have been checked and adjusted. The player shows slight signs of use and minor scratches on the lid; see the photos. It does not affect operation.
Equipped with a working element and fitted with a DIN connector.
This is electronically operable with 7 buttons.
Mechanically everything works well; from the starting point the needle drops neatly into the groove, engages, and at the end returns neatly to the start position.
Arm tracking has been serviced; everything is functioning properly again.
Comes with original power cord. Supplied with a good belt.

Shipped well packed and insured.

Specifications:

Speeds: 33 - 45 rpm.
Speed deviation: < 0.02 %
Speed control range: > +/- 3 %
Choose speed: 2 indicators

Tonearm: Tangential
Tangential tracking: < 0.04°
Lift system: Electronic
Anti-skating: Parallel tracking, four-angle compensated

Motor: Servo-driven DC
Drive system: Belt-driven turntable: 30 cm / 1.3 kg

Recommended tracking force: 0 - 1.5 g
Recommended stylus pressure: 12 mN / 1.2 g

Wow and flutter: < +/- 0.05 % dg
Wow and flutter, WRMS: < +/- 0.025 %
Rumble weighted: > 65 dB
Rumble unweighted: > 45 dB

Power supply: 110 - 130 - 220 - 240 V
Power consumption: 20 W
Dimensions (W x H x D): 49 x 10 x 38 cm
Weight: 11 kg