Akai - AM-27 Solid state stereo receiver
06
days
20
hours
56
minutes
17
seconds
No bids placed
Catawiki Buyer Protection
Your payment’s safe with us until you receive your object.View details
Trustpilot 4.4 | 141948 reviews
Rated Excellent on Trustpilot.
Akai AM-27 integrated stereo hi‑fi amplifier, built in Japan circa 1991–1993, in good physical condition and 100% tested and functional, weighs 6.2 kg with no extra accessories.
AI-assisted summary
Description from the seller
Akai AM-27 integrated stereo amplifier, produced in Japan around the early 1990s (circa 1991–1993). Technically in 100% fully functioning condition and visually in neat condition with light signs of use consistent with age.
For enthusiasts of tight 1990s audio lines, the AM-27 offers a no-nonsense setup with plenty of attention to signal purity. The front panel is clearly laid out with solid knobs and a central source selector switch. In terms of sound, the amplifier delivers a powerful, dynamic and transparent presentation with a fast bass response and a clear stereo image.
An important technical detail for purists is the Source Direct function: this bypasses the entire tone control and balance to send the audio path as short and uncolored as possible to the final stage. Additionally, the amplifier is equipped with a built-in phono preamp for turntables with an MM cartridge, dual tape monitor connections and robust speaker terminals suitable for driving two pairs of speakers.
Specifications
Type: integrated stereo hi-fi amplifier
Model: Akai AM-27
Year of manufacture: circa 1991–1993
Continuous output power: 2 x 40 Watts RMS into 8 Ohms (approx 2 x 55 Watts into 4 Ohms)
Dynamic power: 2 x 60 Watts into 8 Ohms / 2 x 85 Watts into 4 Ohms
Frequency range: 10 Hz – 60,000 Hz (+0 / -3 dB, Source Direct)
Total Harmonic Distortion (THD): 0.05% (1 kHz, 8 Ohms)
Damping factor: 45 (1 kHz, 8 Ohms)
Signal-to-noise ratio: 75 dB (Phono MM), 95 dB (Line/CD/Tuner/Aux)
Tone control: Bass (±10 dB at 100 Hz), Treble (±10 dB at 10 kHz), Loudness (+6 dB at 100 Hz, +4 dB at 10 kHz)
Direct mode: Source Direct
Inputs: Phono (MM), CD, Tuner, Aux/Video, Tape 1/DAT, Tape 2
Outputs: Tape Rec Out 1 & 2
Speaker outputs: screw/terminal terminals for 2 speaker pairs (Speakers A / B / A+B)
Front connections: 6.3 mm jack headphone output
Power supply: 220–230 V AC, 50 Hz
Power consumption: approx 130 Watts
Dimensions (W x H x D): 42.5 x 13.7 x 33.0 cm
Weight: 6.2 kg
Manufacturer: Akai Electric Co., Ltd. (Tokyo, Japan)
Akai AM-27 integrated stereo amplifier, produced in Japan around the early 1990s (circa 1991–1993). Technically in 100% fully functioning condition and visually in neat condition with light signs of use consistent with age.
For enthusiasts of tight 1990s audio lines, the AM-27 offers a no-nonsense setup with plenty of attention to signal purity. The front panel is clearly laid out with solid knobs and a central source selector switch. In terms of sound, the amplifier delivers a powerful, dynamic and transparent presentation with a fast bass response and a clear stereo image.
An important technical detail for purists is the Source Direct function: this bypasses the entire tone control and balance to send the audio path as short and uncolored as possible to the final stage. Additionally, the amplifier is equipped with a built-in phono preamp for turntables with an MM cartridge, dual tape monitor connections and robust speaker terminals suitable for driving two pairs of speakers.
Specifications
Type: integrated stereo hi-fi amplifier
Model: Akai AM-27
Year of manufacture: circa 1991–1993
Continuous output power: 2 x 40 Watts RMS into 8 Ohms (approx 2 x 55 Watts into 4 Ohms)
Dynamic power: 2 x 60 Watts into 8 Ohms / 2 x 85 Watts into 4 Ohms
Frequency range: 10 Hz – 60,000 Hz (+0 / -3 dB, Source Direct)
Total Harmonic Distortion (THD): 0.05% (1 kHz, 8 Ohms)
Damping factor: 45 (1 kHz, 8 Ohms)
Signal-to-noise ratio: 75 dB (Phono MM), 95 dB (Line/CD/Tuner/Aux)
Tone control: Bass (±10 dB at 100 Hz), Treble (±10 dB at 10 kHz), Loudness (+6 dB at 100 Hz, +4 dB at 10 kHz)
Direct mode: Source Direct
Inputs: Phono (MM), CD, Tuner, Aux/Video, Tape 1/DAT, Tape 2
Outputs: Tape Rec Out 1 & 2
Speaker outputs: screw/terminal terminals for 2 speaker pairs (Speakers A / B / A+B)
Front connections: 6.3 mm jack headphone output
Power supply: 220–230 V AC, 50 Hz
Power consumption: approx 130 Watts
Dimensions (W x H x D): 42.5 x 13.7 x 33.0 cm
Weight: 6.2 kg
Manufacturer: Akai Electric Co., Ltd. (Tokyo, Japan)
Details
Era
1900-2000
Brand
Akai
Model
AM-27
Multiple models
No
Physical condition
Good
Number of objects
1
Includes
No extra's
Weight
6.2 kg
Functional condition
Tested and working/playable
Sold by
