NAD - C325 BEE Solid state stereo amplifier





€19 | ||
|---|---|---|
€12 | ||
€9 | ||
Catawiki Buyer Protection
Your payment’s safe with us until you receive your object.View details
Trustpilot 4.4 | 142553 reviews
Rated Excellent on Trustpilot.
NAD C325 BEE integrated stereo amplifier, tested and working, in excellent physical condition, weighing 10 kg, with power cord included.
Description from the seller
Audiophile amplifier
The NAD C325BEE is a highly acclaimed integrated stereo amplifier designed by the legendary Bjørn Erik Edvardsen. This model is renowned for its dynamic performance, which often exceeds its conservative specifications on paper.
Below is an overview of the key technical specifications and features:
Power & Performance
• Continuous output power: 2x 50 Watts into 8 Ohms (both channels driven)
• IHF Dynamic power: 110 Watts (8 Ohms), 160 Watts (4 Ohms), 220 Watts (2 Ohms)
• Total Harmonic Distortion (THD): 0.02% – 0.03%
• Frequency response: 20 Hz to 20 kHz
• Damping factor: >100 to 160 (depending on measurement method)
• Signal-to-noise ratio: 93 dB
• Dynamic headroom: 3.4 dB
Connections & Controls
• Line inputs: 7 line inputs, including 2 tape loops and a convenient MP mini-jack (3.5mm) input on the front panel for phones or media players. Note: the amplifier does not have a built-in phono stage for turntables.
• Pre-out / Main-in: Equipped with removable jumpers, allowing you to use the unit solely as a pre-amplifier or as a power amplifier. • Channel separation: 70 dB
• Outputs: 4mm banana/binding post speaker terminals, a 1/4" (6.35mm) headphone output, and a 12V trigger connection.
Specific NAD Technologies
• PowerDrive: Automatically adjusts the power supply to the speaker load for maximum dynamics without distortion.
• Soft Clipping: Protects connected speakers from damage by smoothing out harsh peaks when the amplifier is overdriven.
• BEE Clamp & DC Servo: Improve transistor stability at high frequencies and eliminate unwanted coupling capacitors.
Physical Specifications
• Dimensions (WxHxD): 435 x 100 x 290 mm
• Weight: Approximately 6.5 kg
Insured shipping
Pictures are part of the description.
Seller's Story
Audiophile amplifier
The NAD C325BEE is a highly acclaimed integrated stereo amplifier designed by the legendary Bjørn Erik Edvardsen. This model is renowned for its dynamic performance, which often exceeds its conservative specifications on paper.
Below is an overview of the key technical specifications and features:
Power & Performance
• Continuous output power: 2x 50 Watts into 8 Ohms (both channels driven)
• IHF Dynamic power: 110 Watts (8 Ohms), 160 Watts (4 Ohms), 220 Watts (2 Ohms)
• Total Harmonic Distortion (THD): 0.02% – 0.03%
• Frequency response: 20 Hz to 20 kHz
• Damping factor: >100 to 160 (depending on measurement method)
• Signal-to-noise ratio: 93 dB
• Dynamic headroom: 3.4 dB
Connections & Controls
• Line inputs: 7 line inputs, including 2 tape loops and a convenient MP mini-jack (3.5mm) input on the front panel for phones or media players. Note: the amplifier does not have a built-in phono stage for turntables.
• Pre-out / Main-in: Equipped with removable jumpers, allowing you to use the unit solely as a pre-amplifier or as a power amplifier. • Channel separation: 70 dB
• Outputs: 4mm banana/binding post speaker terminals, a 1/4" (6.35mm) headphone output, and a 12V trigger connection.
Specific NAD Technologies
• PowerDrive: Automatically adjusts the power supply to the speaker load for maximum dynamics without distortion.
• Soft Clipping: Protects connected speakers from damage by smoothing out harsh peaks when the amplifier is overdriven.
• BEE Clamp & DC Servo: Improve transistor stability at high frequencies and eliminate unwanted coupling capacitors.
Physical Specifications
• Dimensions (WxHxD): 435 x 100 x 290 mm
• Weight: Approximately 6.5 kg
Insured shipping
Pictures are part of the description.

